Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount
(297 reviews)
Price: $244.33
In Stock
Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount
Item # S64663
Our Price: $244.33
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (297)
- Q & A (0)
- Photos
Swagman RV and Camper Bike Racks - S64663
- RV Bumper Rack
- Motorhome
- Travel Trailer
- Fifth Wheel
- 2 Bikes
- Mountain Bikes
- Road Bikes
- Womens Bikes
- Fits 2 Inch Hitch
- Platform Rack
- Swagman
This versatile 2-bike rack is great for everyday use and for vacations. It slides into the 2" hitch on your car, truck, or SUV, and it bolts to the bumper on your RV. Includes all the hardware necessary to quickly swap between vehicles.
Features:
- Platform bike rack carries 2 bikes using your vehicle's hitch receiver or your RV's bumper
- Included adapter fits a continuously welded steel RV bumper
- Padded hooks on ratcheting arms hold bikes securely by the frame
- Sliding wheel hoops let you carry bikes with different wheelbases
- Pull pins allow mast to fold down and wheel trays to fold up for storage
- Anti-rattle hitch pin reduces movement of rack in hitch receiver
- Padlocks (sold separately) deter theft of your bikes and the rack
- Durable steel construction with black powder coat is rust resistant
Specs:
- Application: 2" x 2" trailer hitch receivers or 4" - 4-1/2" tall RV bumpers
- Carrying capacity: 2 bikes
- Weight capacity: 35 lbs per bike
- Distance from center of hitch pin hole to:
- Edge of upright arm: 10-1/2"
- First wheel hoop: 8"
- Maximum tire width: 3.5"
- Maximum wheelbase: 52"
- Weight: 36 lbs
- Limited lifetime warranty
Versatile Bike Rack
This versatile 2-bike rack is perfect for use with your car, truck, or SUV, as well as your recreational vehicle. It mounts in your vehicle's 2" hitch receiver, or you can mount it to your RV bumper with the included adapter. To install the rack on your RV, simply slide the sleeve over the shank and insert the hitch pin. Place the included plate under your RV's bumper and bolt the sleeve to it.
Padded, Ratcheting Hooks
The mast has a pair of ratcheting hooks that hold your bikes securely by the top tube. And because they move independently, you can carry bikes of different shapes and sizes. The hooks have soft padding that won't scratch or scuff your bike's paint.
Sliding Wheel Hoops
The rack has wheel hoops that provide a stable base for mounting your bikes. Each hoop has a hand knob that lets you easily slide it along the tray to accommodate your bike's wheelbase.
Folding Design
You can fold the mast down for easy access to the rear of your RV. Simply pull the pin at the base of the mast and fold it down in either direction. You can also fold the trays up against the mast for storage. Just pull the pins at the junctions where the trays meet the rack, fold the trays up, and reinsert the pins into the provided holes.
64663 Swagman XC2 Traveler Platform-Style 2 Bike Carrier for 2" Hitches or RV Bumpers - Tilting
Installation Details
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount - S64663
Average Customer Rating: 4.7 out of 5 stars (297 Customer Reviews)
This versatile 2-bike rack is great for everyday use and for vacations. It slides into the 2" hitch on your car, truck, or SUV, and it bolts to the bumper on your RV. Includes all the hardware necessary to quickly swap between vehicles.by: Tim E02/24/2024
Works great! Our bikes have low cross bars so it took a bit to figure out the "sweet spot" for the holding arms. Finally get the bikes out of the camper when traveling; yipee!
by: Roland11/25/2021
Bike Carrier works well. Quick and easy install and bike setup.
However, I had to modify hitch extension bar supplied by 2” to avoid handle bar coming in contact with camper.
by: Tamara C09/16/2013
..we received our Swagman bike carrier in just 3 days after placing our order on a Saturday! We got our confirmation in minutes and the shipping info followed an hr later. WOW..great service !! The carrier was easy breezy to put together (approx 10 min) and then another 10-15 to place on the trailer bumper. We just got back from a week long trip..used our bikes every day. They were SO easy to get on and off. We wondered why we didn't buy from you sooner!!! All in all..a Great bike rack.
Tamara C.
9/17/2014
Hi Patrick!We still LOVE our Swagman! It goes with us on all of our camping adventures. Sometimes we see vehicles on the way.. with their bicycle tires flapping around and we always say..they should have gotten a swagman!! Ha ha. We will continue to share with our fellow campers how easy E-Trailer.Com was to use. Thanks for the email and your great customer service!Tamara C.Kennewick, WA
by: Chad S. 06/27/2017
Good product and seems to hold the bikes pretty good. The only issue I have is that the handlebars from one of my bicycles hits the RV housing. If you get this product and install it, please keep in mind that you will probably have to pad the one side of the handgrip. I have a spare tire attachment as well that I had to move. No big deal. Just that it's covering up the license plate now. We'll see how long it takes the "fuzz" to pull me over and tell me about this. LOL!
Chad S.
6/27/2018
Still working great! Havent been pulled over yet for partial blocking the RV plate. Still sticking to my original comment about padding the handle bars against the RV.
by: Neil07/18/2022
This is a very solid and heavy-duty bike rack. Mount to RV bumper is sturdy and secure with bolts to prevent rattling. Due to concern from stories of bumpers separating, I added two unistrut braces tying back to the hitch frame. Had to use bumper mount versus hitch to leave room for the spare tire mount.
I partly rotated bike handlebars closest to trailer (off-center from wheel) to prevent them from rubbing the back of the trailer. Good bike lock secures everything in place.
by: Mick (NY TRUCKER)06/16/2013
I used this hitch in a very different way, I bolted it backwards to my deck plate on Peterbilt 387 tractor so that my wife & I could carry our bikes on our cross country runs. It works real well. After 8 years of use and the abuse of salty winter roads my first one was getting in tough shape so I replaced it with another new one of the same model. It's a very sturdy unit and gave me years of dependable service, would highly recommend it to anyone. Here is a photo of the old one in service a few months before I replaced it.
Mick T.
6/16/2014
This hitch does a super job in a very tough environment being that mine is installed on a Class 8 vehicle, a Peterbilt 387, behind the cab
by: Ralph06/15/2018
can't use it with my Montana 3731FL 5th wheel, the bumper set a little under the back of the RV so I can't bolt the rack to the bumper.
Rachael H.
7/11/2018
I have looked through our other bumper mount hitch options that we have for an RV and most of them would still interfere with how your bumper is recessed under your trailer. I am sorry this did not not work for another option that you might consider would be a ladder bike rack. I have included those here for your reference. I did speak with our representatives at Swagman and if you have the clearance you can mount the receiver portion on the underside of your bumper, but that looks like it would be difficult as well. All the other RV bumper mounted hitch will need access to both sides to properly secure the hitch to the RV bumper, and I can see that you bumper may not provide that access.
Helpful Links
by: DBArvadaCO08/04/2017
Bought this Swagman bike rack so we could take our mountain bikes camping and use the rack on either our truck or our 5th wheel. It's a sturdy rack that's relatively easy to use. Releasing the hold-down hooks can be difficult at times, but not a big deal. Once you get the tire hoops set in the right position it's easy to get the bikes secured on the rack. In short, I would buy this rack again. There are some nicer racks out there that might be easier to use, but they cost a lot more. This one is the best bang for the buck that I've found.
by: David09/08/2019
I recently completed the assembly of the bike rack. The rack comes to you about 3/4 assembled. The process is fairly painless if you are just a little bit mechanically inclined.
I found the rack to be well made with some nice adjustable features. The clamps that hold the bikes in place are of two different sizes ( height or length). This allow us to use the shorter one on my wife's bike and the longer one on my bike. The adjustable wheel cradles are easy to adjust to different bike lengths.
Haven't driven down the road with the bikes loaded but I don't see any issue with the rack in that regard. I will be cutting a hole in a tennis ball to put on the handle bar closest to the back of the camper.
The rack appears to be solid. I did choose to go with the optionally available locking pin as well. This really solidified the feel of the rack.
by: Steve M07/05/2016
I was looking for a rack that minimize impact to rear-view window visibility, as my wife felt uncomfortable with the blockage caused by most racks. This was the only rack where there was no rise at all from the hitch - it comes flat because it's mostly designed for attaching to an RV. Well, the ground clearance is still a foot and that works fine. The rack appears very steady after the install. It also folds compactly when not in use. I have not yet had an opportunity to take it on a ride.
The instructions for putting the rack together could have been clearer, which is why I'm taking off 1 star.
by: JT08/02/2023
It is perfect for two bikes. The wheel holders are adjustable as well as the over-frame bars, which lock the bikes into position. It is rugged and durable and I would highly recommend it!
by: John w08/29/2022
Just got done installing it on my 5th wheel camper. All brackets seam to be solidly built and not wobbly.
by: Joe C08/18/2022
Great rack. Road well on the back of my travel trailer from Parker Az to Florida.
Joe C.
8/19/2023
Still holding up. Have lost a bolt that holds the wheel braces but other than that no issues. We have taken the trailer and bike rack back across America this year and are currently in Montana.
by: Hillis K05/23/2018
Bike rack was easy to assemble. We wanted a bike rack for our 5th wheel to fit on the bumper and still retain the roof ladder that's in the middle of the bumper. After tightening the hitch bolt, it is very sturdy.
by: Tim K06/05/2012
This was an extremely smooth transaction from purchase to product arrival. Etrailer.com kept me informed from order conformation to product shipment and shipment tracking. Staff was very helpful when I placed the order. The bike rack was exactly as advertised and in actual use, the only issue was with the innermost bicycle's handlebar came into contact with the motorhome (see attached photo). I resolved this by loosening the handlebars and twisting them to run parallel with the motorhome. Other applications may not have this problem, based on the design of the individual motorhome. I'm pleased with the build quality of the bike rack and I think I will get many years of reliable service from it. I would recommend both etrailer.com and this bike rack to anyone looking for a similar product.
by: Johnny 04/28/2023
We have used the rack on both our camper and our truck. It works well on both. We have to adjust one of the bike handles and seat to get them to fit behind the camper, but it's not hard to do. The rack is well-built and sturdy. We are very pleased with our purchase and would buy it again.
by: Jessica10/31/2017
We received the above bike rack and found it easy to put together. We installed it yesterday and we are very satisfied. Going on the road soon, so can’t give a full review just yet. But, etrailer’s service is outstanding.
Ernie Pagan
by: Joseph 05/04/2024
Quick delivery, everything was there and it was easy to install.
by: Jon09/11/2015
This was exactly what I was looking for.... As always etrailer's packing and shipping was super.... Already attached the bike rack to the RV bumper and tried it on the 2011 Rav4 as well... In a word.... Perfect.... Thanks etrailer!
by: Craig03/14/2023
Our second trip out on of the bikes came off and we didn't realize it until we were 40 miles from home. Ending up finding it . Now I strap them on. Both are $700 bikes and now mine is all scratched up.
Brooke M.
3/29/2023
To be honest, I would not recommend this bike rack for seven hundred dollar bikes because it is frame mounted. If you have alternate frames or womens bikes that you are carrying with this rack, the hook may not have had a very snug grip because of the way the frame tils away from the hook. An adapter like part # 64005 would help remedy this issue and give you a better contact point. But if you are in the market for a better quality rack for your bikes, I recommend part # KU98VR. It is more expensive but, in addition to other features, it is a wheel mounted bike rack meaning it holds the wheels instead of the frame of your bike. It has an option strap kit in case your bikes have fenders as well.
by: Steve04/18/2020
The bike rack is incredibly easy to put together. It was easy to install. I purchased the big tire accessory and it works perfectly for our fat tire sikk beach cruiser bikes. It folds up and stores easily. Great purchase. Also shipping was timely and without a problem.
by: Larry07/26/2020
Works great, holds the bikes from the wheels with no movement. Took it on trails and the mountain bikes did not move.
by: Deborah04/20/2020
Love the carrier I had been on my husband for a couple years to get a carrier because he had been putting them in the back of the truck with a topper He is not getting any younger and each year was getting harder Finally convinced him Chose your carrier and he is well pleased and it makes it so much more enjoyable to go biking
by: William Evans01/09/2015
The bike rack was very nice. The construction was sturdy and easy to assemble. It really looks great on our new Jayco RV that we are getting ready to travel to Florida with. We can now travel with confidence that our bikes will arive safely with us in Florida. Thank you for a great product! We are very happy!
by: Randy08/05/2020
1st bike rack I’ve ever had. Love this Swagman. Very sturdy, built very well. I’m ready to hit the road. Thanks for a great product
25
297
Show More Reviews
See what our Experts say about this Swagman RV and Camper Bike Racks
- Is a Longer Threaded Hitch Bolt Available for Swagman XC Bike Racks and a 2-1/2 Inch Trailer HitchAs long as the threaded bolt is tight in the hitch when securing the Swagman bike rack, # S64663, you will not have to have the clip in place. I called and verified this with my contact at Swagman. A longer bolt is not available. The rack was made for 2 inch trailer hitch receivers that measure about 2-1/2 inches wide on the outside. A 2-1/2 inch receiver is going to measure about 3 inches wide which is why the threaded pin is too short. Using a regular locking hitch pin like # e98881...
view full answer... - Will Swagman Platform 2 Bike Rack for 2-Inch Hitches S64663 Fit Winnebago RV with 2-Inch HitchYes, this Swagman rack will fit the 2-inch hitch on your Winnebago. One of the great features of the Swagman RV Platform 2 Bike Rack for 2-Inch Hitches # S64663 is that it can be used with or without its included 2-inch bolt-on bumper hitch. For folks who do not have a hitch on their RV but do have a continuously-welded bumper this allows installation of the rack, but since you have a 2-inch hitch you won't need to use the hitch portion. RV bike racks have to be built with extra strength...
view full answer... - Recommended Bike Rack and Hitch Receiver for Travel Trailer BumperThanks for the photo. The Swagman Around the Spare Deluxe 2 Bike Rack for RV Bumpers # S80501 and the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 are great options for your 2016 Pacific Coachworks Northland Travel Trailer. The bumper has to be completely enclosed is the explanation you are likely seeking. The Tube with fully welded enclosed ends is ideal and is normal for many applications but not all. You can alternatively use the Curt RV Bumper 2" Trailer...
view full answer...
- Can Swagman Platform-Style 2 Bike Rack # S64663 be Mounted Below RV BumperI spoke with my contact at Swagman about the possibility of mounting the bumper bracket for the Platform-Style 2 Bike Rack # S64663 so that the receiver is below the RV bumper. He said that while they have heard of customers doing this, they do not recommend it as the bracket has not been tested in this manner. If you have a 4 inch square bumper on your RV then another option is to first mount the Buyers Products RV Universal Receiver Hitch # 3371804060, which has been tested and rated...
view full answer...
- Recommendations for Carrying 4 Bikes on Rear of Flagstaff MicroLite XLTYour concern about the potential liability caused by objects coming off the rear of an RV is a valid one. To determine the carrying capacity of your RV bumper, the RV manufacturer will be your best resource, as I do not have engineering information about bumper capacities on any one given RV. Once the capacity of the bumper is known, you can then make a decision about how much weight you can carry and which rack you should use. The strength of the bumper will depend on its construction...
view full answer... - Recommended Platform-Type Bike Rack for Use on 36 Foot 5th WheelIf your 5th wheel already has a 2 inch receiver, you will not need the bolt-on receiver included with the Swagman # S64663. The # S64663 would work for you, but there are better choices available. I personally prefer the XTC model, part # S64670 due to its angled shank that provides additional ground clearance. The XTC also uses straps to retain the wheels in the hoops, a feature not found on the S64663. The adapter included with the XTC can be removed, which will allow it to be used...
view full answer... - Trailer Hitch Mount Bike Rack Recommendation for a 2011 Mazda CX-7Adding a hitch extender will reduce the tongue weight capacity of the trailer hitch by 50 percent so I do not recommend it. I am sure you have tried different pedal positions and if nothing is working then a different rack may be the way to go. A rack like the Swagman Chinook, # S64683, will give you plenty of clearance from the center of the hitch pin hole to the bikes. It measures 12-1/2 inches form the center of the hitch pin hole to the nearest part of the bike rack.
view full answer... - Recommendation for Adding a Bike Carrier to a 2005 Jayco Designer 35 5th WheelMy first suggestion would be to contact Jayco to determine if they recommend using a hitch on the rear of your 2005 Jayco Designer 35 Fifth Wheel. You will want to provide them with your VIN for the most accurate information. If they ok the use of a hitch, ask them for the recommended weight capacity. This will be the maximum amount of weight that can be safely hauled on the back of the trailer. Keep in mind that these adjustable fit trailer hitches are not designed to fit specific trailers....
view full answer... - Recommended Bike Rack to Be Used on the Rear of Motor HomeOne of our most popular hitch bike racks that can be used on the rear of a motor home is the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers, part # S64670. This is a platform style rack for easy loading and will work with many different designs of bike frames. I am including links to the installation instructions on the Swagman bike rack and a video review of the same bike rack. I am also including a link to a list of bike racks that can be used on the rear of a RV or...
view full answer... - Four Bike Rack for my Camper BumperWe have options available that will allow for the carrying bikes on the back of your camper but the Swagman Platform-Style 2 Bike Rack part # S64663 does not have an expandable feature. Instead the Swagman Trailhead 4-Bike Rack for 2" Hitches part # S63381 paired with the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 will allow you to transport 4 bikes behind your camper and also like on a vehicle like the other Swagman you looked at. Of course if you have carbon frame bikes you...
view full answer... - RV Approved Bike Rack Recommendation for a Bike with Rear SuspensionThe Stromberg Carlson 2 Bike Rack, # LA-102, holds bikes by the seat tube on the frame (see photo). If your bike has a set tube that extends from the seat down to the pedals and enough room to mount the bike on the cradles of the bike rack, then this bike rack will work well for you. There are many different frame designs for bikes with rear suspension. If your bike does not have a seat tube extending from the pedals to the seat or if the suspension interferes with the seat tube, this...
view full answer...
- Swagman Platform Bike Rack Recommendation for Rear of 2018 R-Pod CamperThe Swagman XC bike rack part # S64650 that you referenced weighs 29 lbs total. You'd have to also factor in the weight of your bikes as well which this has a 35 lb per bike capacity. That said, this rack isn't rated for use at the rear of a camper trailer. Reason being there is a much rougher ride quality at the rear of a trailer. For a similar bike rack that is reinforced for the rougher ride we have the Swagman Platform rack part # S64663. This would work well in a 2 inch hitch. You'd...
view full answer... - Recommended Locking Anti-Rattle Hitch Pin For The Swagman Traveler XC2 Bike RackThe Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount Item # S64663 comes with an anti-rattle hitch pin but if you want a locking one you'll need the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks Item # S64027
view full answer... - Clearance of Swagman Platform Bike Carrier S64663 On 2000 Jeep TJ WranglerMy contact at Swagman advises that the back edge of the main 2 x 2 inch horizontal tube will extend back 16 inches from the center of the hitch pin hole on your receiver. I have included a measured drawing of this carrier that will help illustrate. Another common concern for owners of vehicles with rear-mounted spare tires is clearance for the spare. You can determine the position of the Swagman Platform Bike Carrier, Part # S64663, when mounted on your 2000 Jeep TJ by measuring back...
view full answer...
- Bike Rack That Can Attach Directly to 4 inch Square Bumper of Fifth Wheel TrailerWe have bike racks like the Swagman part # S64663 which are designed to attach directly to the standard 4 inch square bumpers found at the rear of fifth wheel trailers like what you have. This rack weighs 40 lbs and has a capacity of 35 lbs per bike. I attached a review video for it for you to check out as well.
view full answer... - Hitch-Mount Bike Rack Recommendation for Use with Two Electric Bikes in 2-Inch HitchThule's EasyFold 2 Bike Platform Rack # TH903202 can handle two e-bikes up to 65-lbs apiece and bike tires up to 2-1/2-inches wide. This rack will fit both 1-1/4-inch and 2-inch hitches. The EasyFold also happens to be a class-leading platform rack for any bikes. Its feature set is superior to almost any other premium quality carrier. It is lightweight - only 45-lbs; it features a handy foot-operated tilt mechanism, built in wheels for easy maneuvering around the garage; it folds up...
view full answer...
- Is 40 ft lbs Torque Exactly Required to Install the Threaded Pin of the Swagman Rack part # S64663Yes, 40 ft lbs is pretty snug but not overly tight for installing the threaded pin on the Swagman Platform Rack part # S64663. While having exactly 40 ft lbs of torque on the pin every time you install this rack would be nice we don't expect you to use a torque wrench everytime you install this rack. I would recommend you use a torque wrench the first time you install the threaded pin to give you an idea how tight it needs to be and then use a regular wrench after that to get it about...
view full answer... - Trailer Hitch Mount Bike Rack Recommendation for a Tiffin Allegro RED Motor HomeWe have numerous racks that are rated for use behind an RV or trailer that would work for you. A rack with 4 inches of clearance probably will not work. The regular XC, # S64650, measures 10-1/2 inches from the center of the hitch pin hole out to the first wheel hoop. The XTC-2 that you referenced, # S64670, would also be a better choice. It measures 8 inches from hitch pin hole to wheel hoop. I have included links to videos on both racks for you to view. I have also included a link to...
view full answer... - Platform-Style Hit-Mount Bike Rack Recommendation For Montana Fifth Wheel TrailerWe do offer several bike carriers that will work on the back of your motorhome. I recommend the Swagman Platform-Style 2 Bike Rack, part # S64663 and think it may work well for you. This rack will accommodate bikes with wheels up to 3-1/2 inches wide and with a wheelbase up to 52 inches long. This will fit a 2 inch receiver opening and has a weight capacity of 80 lbs, which is right at the weight you said your 2 bikes would weigh. I have attached a product review video you can check out.
view full answer... - Platform Bike Rack to be Used on Front Mount Hitch of 2013 Chevrolet SilveradoUsing a bike rack that's approved for RV use, like the Swagman # S64663 you mentioned, is a pretty good idea on a front hitch. RV bike racks are built sturdier than those that aren't RV approved so they can handle the added movement from the RV's long wheel base. Having that additional stability to a rack on the front, with all of the extra wind and jarring from turns, sounds like a good idea. The # S64663 is not an XC model but it has a similar design. The XTC-2 # S64670 is a great...
view full answer... - Weight and Dimensions of Swagman S64663 Platform-Style Bike RackThe 36.1 lb figure represents the weight of the contents of the box, minus any packaging, which will be the installed weight. The capacity of the rack is indeed 70 lbs, or 2 bikes weighing no more than 35 lb apiece. From the center of the hitch pin hole to the furthest rearward portion of the rack would be just shy of 20 inches. Since the hitch pin hole sits at about the halfway mark in the width of the rear bumper, that would mean that the rack extends rearward from the bumper right at...
view full answer...
- Replacement Ratcheting Arm for Swagman Traveler Bike RackThanks for the photo. It looks like you have the Swagman Platform-Style 2 Bike Rack part # S64663 which means the Replacement Short, Ratcheting Grip Arm part # P187 is correct for you.
view full answer...
- Does Lippert Jack It Bike Rack Have to Use Angled PieceI see what you are saying and yes, the Jack-It 2 Bike Rack # LC429756 does need to use the angled portion because the top portion does not have a bolt hole in the right spot to be able to not use that piece (see accompanying photo). The best option for you to carry a couple bikes with your trailer is with the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663. If you have a 4" or 4-1/2" square bumper this will fit right to that, or you will need this rack plus the...
view full answer...
- Platform Style 2 Bike Rack to be Used on Rear of Jayco 5th Wheel TrailerI have a solution for you, but the Swagman XTC-2 # S64670 is not rated for use on the back of a 5th wheel or towed trailer because of the extra movement that occurs at the back of those applications. Instead, I recommend that you go with the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 which is also a platform rack like the XTC-2 and has the same 35-lbs per bike capacity. The great thing about this rack is that it can be attached to either a 2" hitch or the...
view full answer...
Do you have a question about this RV and Camper Bike Rack?
Info for this part was:
Updated by:
Leah B
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Matthew S
Updated by:
Noah M
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Tyler C
Video by:
Jacob T
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
11/29/2021
I recommend using a hitch extender like part # HE06 as it will add 7 and three eights inches to the hitch. It will also through reduce the hitch capacity be 50 percent, including the tongue weight. You can secure it to the hitch with a hitch pin part # PC3 or lock part # e98880.
Helpful Links
Hitch-AdaptersBrophyHE06.html
Hitch-Pins-and-ClipsDraw-TitePC3.html
Trailer-Hitch-Locketrailere98880.html