bing tracking image
  1. RV and Camper Bike Racks
  2. Swagman
  3. RV Hitch Rack
  4. Motorhome
  5. Travel Trailer
  6. Fifth Wheel
  7. Flat-Towed Vehicle
Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches

Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches

Item # S63381
Retail:$413.78
Our Price: $190.95
You Save: $222.83
RV and Camper Bike Racks
This item qualifies for Free Shipping
Shipping Weight: 32 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full rv and camper bike racks installation instructions. Great price Alpine Fifth Wheel rv and camper bike racks and expert service. Keystone Alpine Fifth Wheel, 2015 rv and camper bike racks by Swagman are available from etrailer.com. For expert service call 1-800-940-8924 to order your Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches part number S63381, or order online at etrailer.com.
  • All Info
  • Reviews (540)
  • Q & A (0)
  • Photos
  • Used (1)

Swagman RV and Camper Bike Racks - S63381

  • RV Hitch Rack
  • Motorhome
  • Travel Trailer
  • Fifth Wheel
  • Flat-Towed Vehicle
  • 4 Bikes
  • Childrens Bikes
  • Cruiser Bikes
  • Mountain Bikes
  • Road Bikes
  • Womens Bikes
  • Fits 2 Inch Hitch
  • Hanging Rack
  • Swagman

This 4-bike rack is perfect for a family who travels. Anti-sway cradles secure your bikes by the top tube and seat post. Heavy-duty frame handles the extra bounce and sway that results from being mounted on the back of your RV.


Features:

  • Hanging bike rack carries 4 bikes using your RV's hitch receiver
  • Anti-sway cradles with soft rubber straps secure bikes by the top tube and seat post
    • Reduce bike-to-bike contact and help prevent scratches and scuffs
  • Pull pin allows arms to fold
  • Anti-rattle hitch pin reduces movement of rack in hitch receiver
  • Hitch lock and cable lock (sold separately) deter theft of your bikes and the rack
  • Frame adapter bar (sold separately) required for bikes without a straight, horizontal top tube
  • Black powder coated steel construction is rust resistant


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Carrying capacity: 4 bikes
  • Weight capacity: 100 lbs
    • 35 lbs per bike
  • Distance between rack arms (outside to outside): 13-7/8"
  • Distance from the center of the hitch pin hole to:
    • Closest edge of carrier: 12-1/8"
    • Farthest edge of carrier: 38-1/8"
  • Carrier weight: 29 lbs
  • Limited lifetime warranty


Approved for use on cars, trucks, vans, SUVs, RVs, motorhomes, and towable campers

Built for RVs

Swagman Original 3-Bike Hanging-Style Rack

The Swagman Trailhead is built to withstand the added vibration and stress that comes from being installed on the back of your RV. The base has no moving parts, and the mast attaches to the shank with steel-reinforced brackets. These overbuilt components ensure that the rack can take any punishment that the road may inflict.


Dual Folding Arms with Anti-Sway Cradles

Swagman Trailhead 4-Bike Hanging-Style Rack Dual Folding Arms

The Trailhead has dual folding arms that provide excellent support for your bikes. They slope up to provide ground clearance for steep driveways and bumpy roads.


Swagman Trailhead 4-Bike Hanging-Style Rack Hitch Switch Lever

To fold the arms down, remove the pull pin at the top of the mast. This leaves a smaller footprint, so you can keep the rack on your vehicle to park in your garage. And when stored in this configuration, it doesn't take up as much space in your garage.


Swagman Trailhead 4-Bike Hanging-Style Rack Anti-Sway Cradles

Anti-sway cradles with rubber straps hold your bikes firmly in place. Each set of cradles has three straps that secure your bike along the top tube and one that secures the seat post or downtube. This multi-point contact helps keep your bikes from rocking back and forth, reducing bike-to-bike contact. The soft rubber cradles rotate around the rack's arms to accommodate bikes of different styles and shapes.


Threaded Hitch Pin

Swagman Titan threaded hitch pin

A threaded hitch pin is included to help eliminate rattle in the hitch receiver during transport. To tighten the pin in your hitch, use a 5/8" wrench (not included). A clip is also included to keep the pin in place.


Available Seccurity and Adapter Bar

Swagman hitch lock and cable lock

An anti-rattle hitch lock and cable lock (sold separately) are available to secure the rack to your vehicle and your bikes to the rack.


Swagman Bike Adapter Bar

If you have a women's bike, kid's bike, or any other bike without a straight, horizontal top tube, you will need an adapter bar (sold separately) to properly mount your bike. The bar fits between the seat post and handlebar stem post of your bike to create a top tube so your bike hangs level on the rack.



63381 Swagman Trailhead 4 Bike Carrier for 2" Hitches - Non-Tilting

Installation Details S63381 Installation instructions

Customer Satisfaction Score:


Customer Reviews

Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches - S63381

Average Customer Rating:  4.7 out of 5 stars   (540 Customer Reviews)

This 4-bike rack is perfect for a family who travels. Anti-sway cradles secure your bikes by the top tube and seat post. Heavy-duty frame handles the extra bounce and sway that results from being mounted on the back of your RV.

by:

Unfortunately, I cannot make a great review for this bike rack. Two issues. The first, even though it is ‘designed’ for four bicycles, getting three on there is more realistic. The second issue is that it hasn’t held up very well. One of the support bars that the bikes rest on actually bent. The bike rack is supposed to be able to carry four bicycles and we only used it for two adult and a child’s bike. I am considering replacing it with a supporting design instead of this hanging design.

Etrailer Expert

Jenny N.

11/25/2022

I have reached out to Swagman about your experience with the bike rack. They wanted to know the makes and models of the bikes that you use with the rack. Also, I wanted to ask if you were using a bike adapter bar with any of the bikes?

Etrailer Expert

Jenny N.

12/2/2022

This bike rack is a good entry level rack however with a hanging bike rack it can be a challenge to maneuver 4 bikes to hang properly. With a mix of adult and childrens bikes using bike adapter bars with the childrens and womens bikes will allow them to hang easily. I have linked the bars that we carry below. You mentioned that a platform rack would suit your needs better. I recommend part # HR1400Z for you. As the 4 bike platform rack is a bigger rack I also have a 4 bike hanging rack that gives more space to hang the bikes on. It is part # Y02476.



by:

Swagman Trailhead 4 Bike rack on 2015 Nissan Xterra. Solidly built, easy to install and carry two mountain bikes. Stable at 75 mph and over bumps. An excellent value.

Allan

5/25/2018

The bike rack is very solid and easy to install. Weve enjoyed using it over a year. We just purchased a womans mountain bike for my wife and with the more sloped center bar, its a challenge to mount the bike. Others may also find this a problem.

Etrailer Expert

Rachael H.

5/29/2018

Thanks for the follow up. For alternative and bikes that do not have a standard horizontal crossbar we recommend using an adapter bar like # 64005. This will allow you to mount the bike in a more level position in your bike rack.


by:

Wow. This bike rack is solid. I have it installed on my truck for now and will move it to the back of our Jayco 1207 before our trip.

Chris B.

5/17/2018

Still loving my rack and lock.



by:

We use this bike rack extensively on the rear of our travel trailer. We carried 3-4 bikes for about 5,000 miles over 23 days without a single issue. The bike rack couldn't have performed better. I have a rear mounted camera that stays on while I drive down the road so I could actually see the bikes and rack to make sure they remained stable...and they did, even over some bumpy roads.

NOTE: trailer bumpers are not designed to hold anything other than a sewer hose. Visit a local welder to beef up your chassis and bumper before just simply adding a receiver hitch. You need to have a professional welder do this; pay the money...it will be worth it. Had a friend who's bike rack failed because the receiver wasn't properly mounted.

Etrailer Expert

Mike L.

11/2/2018

The strength of the rear bumper will typically depend on the metal its constructed of and how the bumper is welded. Typically a continuously welded steel bumper is pretty strong.



by:

Bike rack worked out very well. I had to buy a couple of additional hanging bars to compensate for a beach cruiser type bike to hang correctly.
Bike rack was assembled very well, it also has a non-rattle hitch pin which screws into the bike rack through the hitch.
The straps and holding bumpers are also well built. The holding bumpers rotate into 3 different positions to account for different frame types.

Johng

7/17/2017

Used it several times in the past year and am still fully satisfied.



by:

Works very good. I've used it many times on short trips and a few long trips over 150 miles.I was most impressed that when I first ordered the rack for my camper, I was told after it had arrived that the original rack would not work as intended and could fail under the right conditions. After reviewing other racks online I called customer service and was told the correct rack to buy and if I paid to send the original one back etrailer would send the right one to me with free shipping. That's what I call great customer service, Thanks again.

Edward

5/29/2017

It,s been a great bike rack with no issues, would definitely recommend to anyone looking for a bike rack to buy.



by:

We love our new bike rack!!! And since I bought the wrong kind to start with from another web site, the technical info I received from etrailer was the key in picking out one that would work on the back of our camper. So far it's been flawless....

Carl O.

8/12/2020

At the one year mark, we continue to be very pleased with our bike rack. while we havent used it with our camper as much as we would like, we did use it last month and it continues to be flawless.



by:

Sturdy product. Used for the first time recently behind a travel trailer, in the Adirondacks - New York. It held strong over bumpy mountain passes.
Very speedy delivery 3 days, to Canada, over July 1st and July 4th holidays.

Mike B.

7/28/2015

Its still going strong....Its handled lots of rain and some long hauls. Excellent product one year in...



by:

I purchased this to attach to my travel trailer. I haul 4 full size bikes on it every time we go camping and it hasn't failed me yet. I didn't send in a review because I wanted to put it to the ultimate test when we went on a 2500 mile round trip camping trip. This bike rack performed flawlessly. It's fairly easy to attach the bikes to it, even when there's 4 of them. The ONLY thing I am trying to upgrade is the lock washer that holds the bike rack to the hitch. With the bouncing weight of the bikes, the split lock washer smashes completely because I tighten it a LOT and it just can't take it. I'm looking for a flat washer that has teeth in it instead of the split washer. Overall though, this bike rack is fantastic! I would definitely recommend it and will buy it again if I need to.



by:

Sturdy. Reason I didn't give it a 5 is because my Trek 8.1 male hybrid isn't a step through, but doesn't have a bar running parallel to the ground either... somewhere in between. Makes the bike a bit of a struggle to load past the rubber keepers. All my other bikes work great. Ok... so I copy and pasted the photo from Trek's site. But it illustrates my issue.

Bill K.

6/7/2016

Ive only used it twice in the past year. My Trek Hybrid doesnt fit well on it. My Giant road bike fits well.



by:

Nothing extravagant about the product. It does what is purchased for: transporting a bike via bike frame.

I had to get this for my fat bike did not fit on my bike rack platform. I saved money going with this and it does the job. It isn't as secure as some of the other options but to be fair those "security" options on products such as Thule aren't hard to bypass.

If you want security use a cable and/or chain and anchor it to the tow-hitch through the frame. Speaking of security the loading pin is nothing more than a bolt that I tighten using a wrench. So the form of security in that sense is the thief not having a wrench or at least not the right wrench to do the job.

So in the end it does what I need it to do. Nothing bad and nothing great about it, just right for the job. Like a meal that solves the issue of you being hungry, but isn't all that satisfying.



by:

I should have watched the videos as the issues I have with the unit are now easily spotted.

(1) It is not easy to work a bike to the inner most mounting location. You're twisting and turning to get over and around the mounting brackets. (2) The bikes are held on by the main tube which also has brake lines running by. The brake lines are held to the tube in such a manner that any bump on the road will slightly twist the lines which rub against the tube and ultimately seem to stretch the brake lines.

On a positive side, the bikes are held out far enough to miss a bumper mounted spare tire.

Find an RV mount that supports bikes by the wheels.



by:

Well built bike rack rated for 5th wheel. Great to do business with.

Kevin M.

9/23/2019

Great! The one exception is the locking, anti-rattle hitch pin. The head of the bolt is neither standard or metric. I have to put it on with a crescent wrench which works but not convenient. The videos state that either a 7/8 or 19mm socket will fit depending on which locking pin you purchase. 15/16 or 24mm is what actually fits the bolt. If a had a 23mm socket, it would probably be a better fit. Love the bike rack and the ability to lock it in place, just not happy that the bolt was not the size that was stated on the videos.

Etrailer Expert

Jon G.

9/30/2019

I wonder if you somehow received a different anti-rattle pin than what was supposed to be in the box. I just pulled this exact bike rack and checked the anti-rattle bolt to find that it fits a 7/8" socket.


by:

My wife and I have been more than pleased with the bicycle rack purchases to be used primarily on the back of our 5th wheel. We have traveled from Kansas to Iowa, Nebraska, Minnesota, Wisconsin, without a speck of trouble, and have used it on the rear of my truck when traveling shorter distances from the campsite to get to trailheads. The fold down function is especially handy and prevents inadvertent head knockers when the trailer is at camp and the bicycles are not attached. The tie down straps are sturdy, and I would recommend this product to others.



by:

I bought this bike rack because it was the only one I could find that was rated for the back of a camper. I wanted a 2-bike rack, but this company only made a a4-bike rack, so my son very obligingly cut it down to a 2-bike size with pipe cutters. Kids are handy.....

So I’ve owned this bike rack for a year. I travel for three months in winter with my Scamp camper and the rack held up perfectly!! Superior product for sure. Dealing with Etrailer has been pleasant and professional. This year I ordered a bike cover from them. There was a short delay with the order and I received a call from the saleswoman about this matter just letting me know the expected delivery date and was that going to be a problem for me. It wasn’t, but i sure appreciated the call.

Am I happy with products and service? You bet!!! Great company.
Thanks, Etrailer!!



by:

This product was recommended by etrailer for the back of a travel trailer for its stability. It attaches securely to the rear bumper and attaches to the hitch with a locking bolt. It is extremely stable and transfers easily to the back of my Jeep. Customer Service was excellent when I had some questions. They recommended I purchase the model that does not fold down side the travel trailer bounces so much. I traveled for 3 months with bikes in tow with no problems.



by:

I bought this bike rack to use with a Curt Trailer Hitch Receiver Class III for a Crosstrek 2018. So far no issues, pleased with the purchase. I am also using the Swagman Anti-rattle Hitch/cable Lock, which was easy to install. My only complaints are 1) the pin that allows the top part of the rack to be folded becomes easily stuck when removing/inserting and 2) depending on the bike frame, it may not be possible to mount on this rack. Regarding number 2, I have a mountain bike that does not fit on the rubber cradles. I was able to remove the outermost cradles (they slide off after removing the safety screws) and placing the bike on the horizontal polls themselves (with some padding using rags and reinstalling the cradles to prevent bike from sliding). Overall these are minor comments and for the price I really can't complain.



by:

This is an excellent bike rack, with little or no swan on the back of a trailer. Do your a favor and research; the torque of a bicycle on the back of a trailer is different than that on a car. This type of rack is what you need if you are hauling back from your trailer, rv or fifth wheel. Best of luck!



by:

Great bike rack. I used it on the back of a rented Cruise America RV and drove over 1200 miles round trip including onto the Playa at Burning Man. We had 3 bikes one of which was a heavy electric bike and the rack worked perfectly. I did need to use a bar for the 2 girls bikes. One might have worked without it but it was borderline and I had purchased the bars just in case.

Great 4 bike rack for use on a RV (especially when the receiver is 2-3" under the bumper as most Cruise Am RVs are.)



by:

I received the product in excellent condition. I have used it once and have mixed reviews.
The bike cradles are not as good as those on my Yakima but I believe that they will work fine. The bike does rock more than I expected.
The assembly was straight forward but concerning. The main bolts in the base called for a 45 foot-pound torque spec. There were two bolts that needed to be installed. These torqued out very well. However the next sentence in the instructions were to ensure that all of the bolts were "tight". Given that the bolts were all the same size I assumed the 45 foot-pounds was also the target. The vertical tube is slightly buckled as it started to crush well before I hit 45 foot-pounds.



by:

After 3 trips (1,200 miles) have found this product to work well on our trailer. Pin on fold down top rack is an extremely tight fit which is great. Torqued the threaded hitch bolt and everything is still tight and no wiggle. I did remove the 4th bike holder so I have more space for our three bikes.... road bike, women’s 26” and girls 24”. Rick solid product. Arrived day 2 after order.



by:

I looked around for a long time for a sturdy bike rack to put on the back of my motorhome, because I already had 1 bike come loose from a popular brand name rack while only on my car. The Swagman 4 bike, 2" rack is very sturdy. The bolt really tightens it to the hitch. Although I wish it tilted down to be able to get into the diesel engine compartment to check fluids while the bikes are on. But I would rather have the security than the convenience. The double straps on each cradle are secure. Being able to rotate the cradles allow accommodation of a bunch of frame styles.

I bought the 4 bike rack to hold 3 bikes - 2 for me, 1 for the wife - so I removed the 4th cradle. That gives a lot of room. I'm not sure how you could put 4 bikes on the rack unless they were perhaps all road bikes.

I haven't actually been out on the road with it yet.



by:

This carrier has survived use on the back of our 5th wheel. Seems to be constructed well. I have only had 3 bikes on at one time though. Depending on the bikes frame configuration some are harder to get positioned due to the triangular rests.



by:

I ordered the Swagman 4-bike rack for 2" hitches. The sales person on the telephone was very courteous, and recorded my order and credit card information in a very friendly and efficient manner. And, as she stated, it was delivered very soon thereafter. I have already used this rack, and find it to be high quality, well built, strong, and suitable for my needs. I am very pleased with this etrailer.com experience, and will be a return customer in the future.



by:

Ordered the Swagman Trailhead 4-bike rack on-line from e-trailer, best price I could find, plus they upgraded my shipping at no extra cost. The rack is very well made and works great behind my 5th wheel. I Would definitely recommend this bike rack and e-trailer.


25
540
Show More Reviews

See what our Experts say about this Swagman RV and Camper Bike Racks

  • Bike Rack to be used During Flat Tow and Why Does the Bike Rack Need to be Flat Tow Approved
    Bike racks are tested under certain conditions to be approved for use on a vehicle, RV/Motorhome or flat tow. A bike rack being approved for a RV/Motorhome doesn't necessarily mean it will also work to be flat towed. In fact more often than not RV/Motorhome approved racks are not flat tow approved. There are a couple options that are both RV/Motorhome and flat tow approved. The Yakima OnRamp Bike Rack for 2 Electric Bikes # Y36FR and Swagman Trailhead 4-Bike Rack # S63381 are going to be...
    view full answer...
    Image 1 for
  • Bike Rack Recommendation For 2010 Toyota 4Runner - MTB Fat Tires
    We do carry the Swagman # S63381 hanging rack that will accommodate your bikes on both applications for your 2010 Toyota 4Runner and your 2010 Airstream Flying Cloud Travel Trailer. We also carry platform racks that will work with your 4Runner, but at this time we do not carry a platform rack that is rated to work with your travel trailer. The Swagman hanging rack is a viable option that will work. You might also consider the Swagman Lock # S64027 . This lock is designed specifically for...
    view full answer...
  • Recommendation to Carry Bike Rack on RV that is Flat Towing Vehicle
    The Roadmaster Dual Hitch Receiver Adapter # RM-077-4 referenced in your question actually has a gross towing weight of 10,000 pounds and a tongue weight of 400 pounds. Towing your 4,300 pound vehicle and attaching a bike rack and bikes should not be an issue with this adapter. Just keep in mind that this product is only intended for flat towing and should never be used to tow a trailer. I have attached a short video demonstration on this product for you to check out. If you do not already...
    view full answer...
  • What is the Carrier Weights of the Curt and SportRack 4-Bike Platform Hitch Mount Bike Racks
    Yes. The Curt 4-Bike Rack # C18086 weighs 86 pounds. If you're looking for a lightweight 4-bike carrier check out the Swagman Trailhead 4-Bike Rack for 2" Hitches # S63381. It's a a solid rack and it only weighs about 30 pounds.
    view full answer...
  • Is it Possible that Curt RV Multi Fit Hitch # 13703 Could Only Install by Welding
    The Curt multi fit hitch part # 13703 was designed to install by either bolting it on or welding. Unless there's just no way to access the out side of the frame to attach hardware I can't see why the hitch could only be welded on and not bolted on. We don't have access to your exact RV though so we aren't able to check and see if there's interference or something that would prevent the install. Now with that said a qualified welder would have no problems welding this hitch in place though...
    view full answer...
  • Can the Kuat Beta 2 Bike Rack be Used Behind 5th Wheel Trailer
    I do have a solution for you, however the Kuat Beta Folding 2 Bike Rack # B202-2 referenced in your question is not rated for use behind a trailer. Because of the extra movement and stress that is put on a bike rack when it is mounted to the rear of a trailer, only certain bike racks are approved by the manufacturer to be used in this manner. Folding racks like the Kuat Beta typically cannot be used, as the folding feature creates a point of movement that can result in failure when exposed...
    view full answer...
  • Recommended Trailer Hitch Receiver and Bike Rack for Viking Trailer with C-Channel Bumper
    For the 2x4 inch C channel bumper on your Viking Epic Trailer, the best option for installing a trailer hitch receiver to use with a bike rack is going to be a frame-mount option like the Curt Adjustable Width # 13703. This is because the C channel bumpers are simply not designed to support the weight of a bolt-on receiver like the Curt # C19101 along with the bike rack and loaded bikes. The Curt Adjustable Width Trailer Hitch can be either bolted or welded to the trailer frame and will...
    view full answer...
  • Recommendation for a Camper Trailer Hitch and Bike Rack for a Coleman Yuma and a Ford Escape
    The only option for carrying bikes on your trailer and your vehicle that we have is a frame mounted hitch. Because of the C channel bumper on your trailer, the Adjustable Width Trailer Hitch Receiver for RVs, 22 inches to 72 inches Wide, item # 13703, would be the best option to allow the use of a bike rack that will work with the camper and your Ford Escape. You will need to be sure to purchase a bike rack that is rated for use behind a trailer. We have the Swagman Trailhead Bike Rack,...
    view full answer...
  • 4 Bike Rack Recommendation for Use at the Rear of a Fifth Wheel Trailer
    At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the rear of the trailer which exaggerates the movement of the trailer when hitting bumps. Because of that only a few bike racks were designed to be reinforced enough for that type of use. The platform bike racks are longer and heavier which adds even...
    view full answer...
  • Bike Rack Compatibility with Stromberg Carlson Bike Bunk Trailer Mounted Carrier
    The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame # CC-275 can be used with the Swagman 4 bike # S63381, # S64400, or # S64940 as well as other 4 bike racks rated for RV use. It cannot however be used with the Swagman 4 Bike Carrier RV Mounted Bike Rack # S80600 which requires a 4 inch square post and much more strength than the Bike Bunk # CC-275 can offer. If you are looking for the platform style bike rack, you will be limited to a 2 bike option like the...
    view full answer...
  • Bike Rack for Use with 2015 F-150 Towing Tear Drop Travel Trailer
    A towing-style bike rack like the Swagman Traveler XCS # S64664 slips over your ball mount and sits between the truck bumper and the nose of the trailer. A rack like this is suitable as long as you have plenty of turning clearance between the vehicle and trailer. The width of your bikes come into play here too. Sometimes an extra-long ball mount like # C45270 will be needed to provide enough clearance for turns. There are other options for bike transport that might be better. If you have...
    view full answer...
  • Bike Rack Recommendation for Use in the Bike Bunk Mounted on a Trailer and for Carbon Frame Bikes
    You are right; a carbon bike frame could get damaged if using a traditional hanging bike rack. Also, there are only certain bike racks rated for use on a trailer, or in this case, for the Bike Bunk # CC-275. But I have the perfect option for you; the Swagman Trailhead, # S63381. It is rated for use with the Bike Bunk, which means it is rated for trailer use, however, it holds the bikes by the frame. I have included a link to a video review of this bike rack for you. Based on the types...
    view full answer...
  • Can the Swagman Trailhead Bike Rack be Used at the Back of an RPod Travel Trailer
    The Swagman Trailhead bike rack # S63381 is indeed rated for use at the back of a trailer and fits 2 inch trailer hitch receivers. This means that you can use it at the back of your RPod travel trailer. I have included a link to a video review of this bike rack for you.
    view full answer...
  • Can Curt Bumper Mount Trailer hitch E-100 be Installed Upside Down
    There's no reason you couldn't install the Curt Hitch part # E-100 with the hitch opening above the bumper. I spoke with my contact at Curt to see if there were any restrictions or further limitations by using this hitch upside down and he told me that you will have no problem using it that way. There are only certain bike racks that are rated for use at the back of an RV or trailer. I have included a link to the options to the right for you. I recommend the # S63381. Make sure the bumper...
    view full answer...
  • Hitch Mount Bike Rack for 4-Bikes on the Back of a Travel Trailer Using Curt Bumper Hitch E-100
    There are only certain bike racks that are rated for use on the back of an RV or trailer but the Thule Hitching Post Pro # TH934XTR is not one of them so I cannot recommend it. But there are several 4-bike racks that are rated for this application. You can use the Swagman Trailhead # S63381. This rack is most like the Thule. It features a 2-arm design and anti-sway cradles. It is a sturdy build to handle the riggers of being at the back of a trailer. Other racks that are rated for this...
    view full answer...
  • Bike Rack to Carry 1 Bike at the Back of a Travel Trailer
    The RockyMounts HighNoon FC Solo Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount # RKY87RR is not rated for use at the back of an RV or trailer. Since you need to carry just one bike, I recommend something simple that is RV/trailer approved: the Swagman Trailhead # S63381. While it is a 4-bike rack it doesn't take up a lot of space and weighs just 30 pounds. I have also included a link to all of the RV/trailer approved bike racks we have.
    view full answer...
  • What is Weight Capacity of Swagman Trailhead Bike Rack
    The capacity of the Swagman Trailhead 4-Bike Rack # S63381 is a little confusing but basically the bike rack itself has a 100 lb overall capacity but the frame cradles (the brackets with the straps that hold the bikes) each have a capacity of 35 lbs. So the capacity is accurate as listed but could be listed better.
    view full answer...
  • Thule Bike Rack That Can be Used at Rear of 5th Wheel Trailer
    At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the rear of the trailer which exaggerates the movement of the trailer when hitting bumps. Because of that only a few bike racks were designed to be reinforced enough for that type of use. The part # TH9058 is not reinforced enough to be used at the...
    view full answer...
  • Bike Rack for Travel Trailer to Clear Rear Spare
    I have a great bike rack solution for your travel trailer that will clear your rear spare but we do not recommend using a hitch extender with bike racks at the rear of travel trailers due to the very harsh ride quality at the rear of them. Instead we have the Swagman Trailhead part # S63381 which has 9-1/2 inches of clearance between the pin hole and the back of the racks upright mast which will easily clear your spare since you need at least 8 inches.
    view full answer...
  • What 4 Bike Hitch Rack Can Go On The Back Of My RV.
    The standard hitch bike rack is not designed to handle the extreme forces that will be put on it if it is mounted to the back of a travel trailer or 5th wheel. The rear of the trailer is extended far away from the axels and this will cause a lot of up and down motion that can cause a hitch bike rack to snap or bend. If it is a swivel rack the moving parts could fail as well. We do have the Swagman Trailhead 4-Bike Rack for 2" Hitches - Fixed Base # S63381 that is designed to be used on...
    view full answer...
  • Recommended 2-Inch Hitch Bike Rack for 24-Foot RV with Rear Spare Tire
    We do offer 2-inch hitch bike racks that are approved for use on the rear of an RV. These are made to handle the extra physical stresses found at the rear of motorhome and trailers. We do not recommend using any type of extension/adapter in your RV hitch as this could potentially damage your hitch due to the additional leverage this would apply to the hitch tube. You'll want to measure from your hitch pin hole to the rearmost part of the RV (probably the outside edge of the spare tire)...
    view full answer...
  • 4 Bike Rack Recommendation that Can be Used at Rear of Travel Trailer that Comes with Locks
    Swagman has the XP Bike Rack part # S64940 which is rated for use behind a travel trailer like you mentioned, can carry up to 4 bikes and has a lock for each individual bike. For a hitch lock you'd then want the part # S64029. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a...
    view full answer...
  • Recommended Hitch Bike Rack for 2019 Ford EcoSport Titanium with Rear Sensors
    Based on my research the four rear sensors on your 2019 Ford EcoSport are located along the bumper beneath the hatch. With this in mind your best bet to try and avoid too much interference will be with a hanging-style rack that features a center vertical mast. The rack itself won't block the sensors at all, as they are spaced apart so that the center mast would extend upward between them. A platform-style rack on the other hand may block the sensors by itself. The potential sensor interference...
    view full answer...
  • Does Hitch Install on 2017 Nissan Rogue Allow Handsfree Liftgate to Still Function
    The hands free liftgate sensor for your 2017 Nissan Rogue will still function with the installation of an aftermarket trailer hitch like the etrailer hitch part # e98846. However, you will need to place your foot on either side of the receiver tube opening in order to activate it. This is the case for most vehicles that have the hands free liftgate sensor. I attached an install video for this hitch for you to check out as well. For a hanging bike rack our most popular 4 bike rack is the...
    view full answer...


< Previous
123. . .8



Do you have a question about this RV and Camper Bike Rack?


Used Items Available
Used Picture for Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches

Condition: Installed

Notes: Item has been installed/test fit.

Our Price: $219.89
Add to Cart
Secure Checkout

Info for this part was:

Employee Joe V
Installed by:
Joe V
Employee Rick A
Installed by:
Rick A
Employee Hayden R
Installed by:
Hayden R
Employee Leah B
Updated by:
Leah B
Employee Adele M
Updated by:
Adele M
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Noah M
Updated by:
Noah M
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew K
Video by:
Andrew K
Employee Patrick B
Video by:
Patrick B
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video by:
Dustin K
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924