bing tracking image
  1. RV and Camper Bike Racks
  2. Lets Go Aero
  3. RV Hitch Rack
  4. Kids Bikes
  5. 2 Bikes
  6. Motorhome
  7. Flat-Towed Vehicle
Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
Lets Go Aero

Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount

Part Number: B01748
In Stock
$149.00
RV and Camper Bike Racks
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This lightweight, V-shaped rack carries 2 bikes of almost any size or style by the wheels - no frame contact. Removable arms let you access your cargo area with bikes unloaded. Breaks down for compact storage in your trunk or garage. Great Prices for the best rv and camper bike racks from Lets Go Aero. Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount part number B01748 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (10)
  • Q & A (0)
  • Photos

Lets Go Aero RV and Camper Bike Racks - B01748

  • RV Hitch Rack
  • Kids Bikes
  • 2 Bikes
  • Motorhome
  • Flat-Towed Vehicle
  • Fits 1-1/4 and 2 Inch Hitch
  • Fits 1-1/4 Inch Hitch
  • Fits 2 Inch Hitch
  • Hanging Rack
  • Lets Go Aero
  • Wheel Mount
  • Locks Not Included

This lightweight, V-shaped rack carries 2 bikes of almost any size or style by the wheels - no frame contact. Removable arms let you access your cargo area with bikes unloaded. Breaks down for compact storage in your trunk or garage.


Features:

  • V-shaped bike rack carries 2 bikes using your vehicle's hitch receiver
  • Adjustable wheel cradles and sway stops stabilize bikes on the rack
    • Rubber straps secure bikes to cradles and protect bike wheel surfaces
  • Rack arms can be removed to access your vehicle's rear cargo area or for storage
  • Cushioned pads prevent bikes from getting scratched or scuffed
  • Anti-rattle hitch pin prevents wobbling and noise in trailer hitch receiver
    • Adapter sleeve converts shank for use with 1-1/4" hitches
  • Hitch lock and cable lock (sold separately) deter theft of bikes and rack
  • Sturdy steel construction with black powder coat is rust resistant


Specs:

  • Application: 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" trailer hitch receivers
  • Carrying capacity: 2 bikes
  • Weight capacity: 40 lbs per bike
  • Distance from center of hitch pin hole to:
    • Closest part of rack: 12-1/4"
    • Farthest part of rack: 24-3/4"
    • Closest part of mast: 18"
  • Carrier weight: 15 lbs
  • 1-Year limited warranty


Approved for use on cars, trucks, vans, SUVs, and motorhomes - not approved for fifth wheels, towable campers, or flat-towed vehicles

V-Shaped Arms

 Adjustable Wheel Cradles

The NEO2 has V-shaped arms that distribute weight evenly, holding your bikes by the wheel, so it won't scratch or scuff the paint. They keep your bikes level and eliminate the need for bike frame adapter bars normally required for mounting women's, children's, and alternative frame bikes on a hanging-style bike rack.


 Adjsutable Wheel Cradles

Thick pads on the arms help keep your bikes from banging into the rack and getting scratched.


 Adjustable Wheel Cradles

The arms can be removed for access to your vehicle's rear cargo area with your bikes unloaded. The rack's arms and shank also break down small enough that you can easily store the rack in your trunk when not in use.


Adjustable Wheel Cradles and Sway Stops

 Adjustable Wheel Cradles

The upper wheel cradles adjust independently so that your bikes hang level on the rack. For support, adjust the lower sway stops so that they are flush against the bottom of your tires. To secure your bikes, pull the rubber strap on each cradle and sway stop over the wheel and hook the tightest hole around the peg at the end of the cradle.


Threaded Hitch Pin and Hitch Adapter

loaded on vehicle

The rack includes a threaded hitch pin that helps eliminate rattle in the hitch receiver during transport. The rack also works with both 1-1/4" and 2" hitches. To use it in a 1-1/4" hitch, simply remove the adapter with the included Allen key.



B01748 Lets Go Aero NEO2 2-Bike Carrier for 1-1/4 Inch and 2 Inch Hitches





Customer Satisfaction Score:

Ratings & Reviews

4.5

10 reviews
This lightweight, V-shaped rack carries 2 bikes of almost any size or style by the wheels - no frame contact. Removable arms let you access your cargo area with bikes unloaded. Breaks down for compact storage in your trunk or garage.

by:

This purchase was to have a rack we can use when we need to bring single bikes in addition to or instead of our tandem. We have used it about a dozen times and it has been a great solution. Easy to store and set up and the wheel mount eliminates any issues with having a horizontal frame member to hang from. We've heavily loaded it several times including wedging our bike trailer between the bikes.



by:

Great customer service, answered all my questions! I’m very happy with my bike rack!



by:

This is a lightweight rack that holds the bikes horizontal by supporting them by their wheel rims. Adjusting it for various size bikes is easy. Bikes are well protected. There are pinned split-fit joints at the base that may be susceptible to wear after a lot of use.



by:

This rack was a great fit for carrying my two bikes on the back of my travel trailer. However, two of the four rubber straps cracked within months and the factory considers this "normal wear" and will not replace them. If you plan on keeping this rack for more than a couple of months you need to stock up on spare straps. The factory wants $[XX] for each one but you can buy a dozen on [online] for $[XX].



by:

Saw a Youtube video and liked this. It appears strong.



by:

Since my bikes are full suspension, I needed rack that can hold them by the wheels, and most have trays under the wheels. This is a great alternative and quite a bit less expensive than the tray carry type. It is simple, light, and easy to use.



by:

Very light and easy to install.

Howie profile picture

Howie

8/21/2023

Terrific product.



by:

The person who helped me in the online chat was very good and I decided to call to get more information. The charming lady I spoke to, Alyssa, was really good and after our chat I felt I had enough info to order. It came today and everything was perfect!



by:

Great selection of products and prices.



by:


10
10

See what our Experts say about this Lets Go Aero RV and Camper Bike Racks

  • Recommended Bike Rack to Use with the Stromberg Carlson Bike Bunk
    I have a great option for you. When using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 there are a few parameters you will need to stay within. The bike rack needs to be travel trailer rated, fit a 2" hitch and the combined weight of the bike rack and your bikes needs to be less than 100 lbs. Given these parameters I recommend the Lets Go Aero NEO2 2-Bike Rack # B01748. This 2 bike rack is the lightest weight of the racks that are rated...
    view full answer...
  • Availability of Adapter to Allow Bike Rack to Be Carried and Tow Trailer
    Sounds like you may be interested in the part # D210. This will fit your 2 inch hitch and gives you a ball mount platform down below and a hitch opening above for your bike rack. However, if you do not yet have a hitch yet, we have great news. We have the EcoHitch Hidden Trailer Hitch Receiver # 306-X7322 that has a 2" opening and a 300-pound tongue weight capacity. With this hitch, you could use the Thule Hitching Post Pro 4-bike rack # TH934XTR. I attached a video of these products...
    view full answer...
    Image 1 for
  • Does Lets Go Aero NEO2 Bike Rack Require Stabilizer Strap For 1-1/4" Hitch
    The answer to your question depends on what the hitch instructions call for. However, if it is a Curt like the # C11412 we previously talked about they have dropped the requirement for the strap. If you have a strap already it wouldn't hurt to use it to stabilize the # B01748 but it is not required.
    view full answer...
  • Recommended Trailer Hitch and Bike Rack for a 2004 Honda S2000 Convertible
    The one and only trailer hitch recommended for your 2004 Honda S2000 is the Curt # C11198. It's a bolt-on installation so no welding is necessary. This Curt trailer hitch has a Class-I rating and has a 1-1/4 inch receiver opening. It also has a maximum towing weight of 2,000 pounds and tongue weight of 200 pounds. Always check your owners manual to obtain the towing capacity and tongue weight maximum. Please note that all non-trailer loads - bike racks, cargo carriers and so forth - should...
    view full answer...
  • Recommended Bike Carrier To Use Between RV And Towed Vehicle
    In order to be able to carry bikes between your towed vehicle and the RV you will first need a dual receiver for your trailer hitch. I recommend the Curt Dual 2 inch Receiver Tube Adapter, part # D-192. the bottom receiver is used for the tow bar and the upper receiver has a 2 inch receiver for the bike carrier. Bike carriers need to be RV rated because they are built to take on the added stress at the rear of the RV or motorhome. The carrier I recommend is the Swagman Original, part...
    view full answer...
  • Recommended Hitch-Mount Bike Rack for 80 Pound E-Bike
    The Let's Go Aero NEO2 2-Bike Rack # B01748 referenced in your question has a total weight capacity of 80 pounds, or 40 pounds per bike. I cannot recommend loading a single 80 pound e-bike like yours onto this bike rack, as the individual cradles are not designed to support this kind of weight. I instead recommend looking at the Hollywood Racks Sport Rider SE # HLY84FR. This platform-style carrier is specifically designed for heavy e-bikes and can hold 2 bikes of up to 80 pounds each,...
    view full answer...
  • Can a Bike Rack be Used on the Front of a Ram 2500 when Towing a 5th Wheel Trailer
    To determine if the Swagman XTC bike rack # S64670 will clear the front of your Ram 2500 there is a measurement you will need to take. Measure from the center of the hitch pin hole out to the distance needed to clear everything at the front of the truck. On the bike carrier, it measures 8 inches from the center of the hitch pin hole to the closest wheel hoop. But it is only a couple of inches from the pin hole to where the shank starts to bend upward. A carrier with a straight shank,...
    view full answer...
  • Will Lets Go Aero Bike Rack Fit 2012 Toyota RAV4 that has Rear Spare Mounted
    Since the rear spare on your 2012 Toyota RAV4 is recessed into the rear door of the vehicle it's not an issue for bike rack clearance as we have found. The Lets Go Aero bike rack part # B01748 will fit and work great as long as you have a hitch installed on the vehicle like the Curt # C13149.
    view full answer...
  • Curt Trailer Hitch vs. Draw Tite Trailer Hitch on 2017 Toyota Prius Prime for Bike Rack
    Though we haven't had a chance to install the Curt Trailer Hitch # C11473 on a 2017 Toyota Prius Prime, based on my research it will sit at about the same spot as the Draw-Tite Trailer Hitch # 24966 on your Prius, which is approximately 7" from the center of the hitch pin hole to the edge of the bumper. In regards to Stabilizing Straps # 18050, these are no longer required by Curt, simply recommended for some hitches. The Curt hitch isn't beefier than the Draw-Tite, as both are a Class...
    view full answer...
    Image 1 for
  • Will the Yakima SpareRide Work With the Factory Backup Camera on a 2020 Jeep Wrangler JLU
    You can install a Yakima SpareRide 2 Bike Rack - Spare Tire Mount - Folding Arms # Y02599 on a 2020 Jeep Wrangler JLU, but it's likely going to interfere with the backup camera. There are relocation kits available for this but I'm not sure that it would really work in this case. For that reason, I recommend going with a hitch mounted bike carrier like the Lets Go Aero NEO2 2-Bike Rack - 1-1/4" and 2" Hitches - # B01748 which will sit 12-1/4" from the center of the hitch pin hole. With...
    view full answer...
  • Recommended 2-Bike Hitch Rack for Use on 5th Wheel Trailer with 1-1/4-Inch Hitch
    I do have a good solution for you but it is not the Thule T2 classic hitch rack # TH9045. Bike racks that are to be used on the rear of a 5th wheel trailer or other RV must be specifically rated for that type of application. Standard automobile bike racks like the excellent Thule T2 # TH9044 are not made for the extra vertical and lateral forces found at the back of a towed trailer. These forces result from the longer distance between the rear axle and the hitch. On a car this distance...
    view full answer...
  • Can Rear Hitch Receiver on 2020 Forest River Rockwood Mini Lite Fit Bike Rack?
    You can use the rear hitch receiver on your 2020 Forest River Rockwood MiniLite. For your specific bikes, I recommend the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 which is rated for travel trailer use as long as your bikes are not over 35 lbs each. If the low step-thru bike frame is too low then using a bike adapter bar like the Swagman # 64005 can be used to create a top frame rail for the hook. To secure your bikes you can use a cable lock like # e98891...
    view full answer...
  • Trailer Hitch and Bike Carrier for a 1999 Ford Mustang V6
    I do have a solution for you but because of the spoiler we are limited to only one choice for a trunk mount bike carrier that is going to fit correctly on a 1999 Ford Mustang V6. You can take a look at the Saris Guardian 3 Bike Rack # SAR43FR. It is a confirmed fit and I have attached a video for you to look at. But you also can install a trailer hitch and use a hitch mount bike carrier. For a hitch you can use # C11041. Then for a bike carrier we just have to make sure the one you...
    view full answer...
  • 2013 Chevrolet Volt Tongue Weight Capacity With the Curt Class I Hitch
    The tongue weight rating of the Curt Class I Hitch # C11221 is 100 lbs. This means the max weight of anything installed in the receiver opening is 100 lbs. For an example, with a hitch mounted bike rack, the total weight of the bike rack and the bikes cannot exceed 100 lbs. Because of the light weight capacity of your hitch and car, I recommend a rack like the NEO2 # B01748. The BikeWing has a total weight of 15 lbs. This rack can carry two bikes with weight capacity of 40 lbs per bike....
    view full answer...
  • Can the Swagman Escapee # S64693 Fit 2 Bikes with Fenders
    Wheel mount bike racks are great because they don't make contact with the frame of your bike, but since your bikes have fenders, you can still go with a platform bike rack, but it needs to be a frame-mount setup. I have a couple of options for you. If you are wanting a more traditional looking bike rack then the Swagman Dispatch # S44FR is what you are looking for as it is rated for use with a 5th wheel trailer. To use this rack, I recommend adding an adapter bar like part # UB01 since...
    view full answer...
  • Will Adding a Trailer Hitch and Bike Rack Affect Gas Mileage on a 2018 Hyundai Ioniq
    Draw-Tite trailer hitch # 24963 weighs all of 20 pounds. The Saris SuperClamp EX # SA4025F weighs 35 pounds. So you could place 55 pounds in your 2018 Hyundai Ioniq's storage area and see if that affects mileage. I believe that it would have a minimal impact if it is even measurable in the short term. The only other option for carrying bikes with this vehicle would be a roof rack and that will definitely affect the mileage. There are lighter bike racks you could use. The Neo2, # B01748,...
    view full answer...
  • Can Bike Rack and Kayak Carrier be Used with Flat Towing Setup
    With a dual hitch adapter you could put a bike rack in the upper hitch opening like the Lets Go Aero part # B01748 that you referenced. Then for a kayak carrier you'd want to look into a roof rack carrier option for the towed vehicle like the etrailer kayak carrier # e98878. If you don't have a roof rack on your vehicle let me know the year/make/model of it and I can make a recommendation for that as well.
    view full answer...
  • Hitch Options for 2012 Chevrolet Camaro for Use of a Bike Rack
    The NEO2 Bike Rack # B01748 is a hitch-mount type bike carrier that requires the vehicle to have either a 1-1/4-inch or 2-inch trailer hitch receiver installed. This rack includes an adapter that lets it work with both hitch sizes. With the NEO2 you can use hitch lock # 63232 to secure the rack to your hitch, cable lock # e98891 to lock your bikes. For your 2012 Chevrolet Camaro we have the Curt # C11222 that fits the convertible version without ground effects.
    view full answer...
  • Will NEO2 Bike Rack Fit a 2010 Scion xD
    The Let's Go Aero NEO2 part # B01748 can fit 1-1/4 inch size hitches like what you would have installed on your 2010 Scion xD so this rack would be compatible. I attached a review video for this rack as well. The only way you'll be able to lock your bikes to this rack/hitch is with a cable lock like our part # e98891 which will need to route through the bike frame and then back to the safety chain loops of the hitch.
    view full answer...
  • Recommended 2-Bike Wheel-Mount Hitch Rack for both 1-1/4-Inch and 2-Inch Hitch Receivers
    We have exactly the rack you're looking for in the Let's Go Aero NEO2 # B01748. This unique wheel-mount carrier offers a great combination of features. It is moderately priced, lightweight, fits both 1-1/4-inch and 2-inch hitches, offers an 80-lb total bike weight capacity and it can be used on both passenger vehicles and motorhomes (not all bike racks can be used on RVs, so this is an advantage). Please refer to the linked video for more on this excellent 2-bike rack. If you'd like...
    view full answer...
  • Will Lippert Jack-It 2 Bike Rack Fit with Bolt-On A-Frame Coupler
    I can definitely see where you are coming from. Attached is a photo I made showing the dimensions of the base part on the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 so you can compare that with the A-Frame coupler on your 2022 Rove Lite travel trailer. If this doesn't work for you then we do have some other viable options as well. We can possibly add a hitch to your Rove Lite using something like the Curt # 13703 along with a bike rack like the Lets Go Aero NEO2 # B01748 or Thule...
    view full answer...
    Image 1 for
  • Hitch for 2013 Mazda 3 Hatchback to Allow Use of Bike Rack
    The various 1-1/4-inch Class I trailer hitches for your 2013 Mazda 3 Hatchback all will fit both versions of the vehicle; those with LED lighting and those without. All share the same 200-lb tongue weight capacity and all are rated as fairly simple installations. Since they all have the same capacity, I suggest the most cost-effective option, # 24843 from Draw-Tite. I have linked the installation instructions as well as two helpful article concerning hitch installation. With this hitch...
    view full answer...
  • Is the Lets Go Aero NEO2 2-Bike Rack Safe for a Travel Trailer
    The Lets Go Aero NEO2 2-Bike Rack # B01748 is safe to use on passenger and motorized vehicles so a motorhome would be fine. It is not approved for use on a travel trailer or 5th wheel like you mentioned. Your photo didn't come through but this may have been from an old description as these are prone to change from time to time depending on the manufacturer. For a similar bike rack I recommend checking out the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756. This mounts at the same...
    view full answer...
  • Will the NEO2 Bike Carrier Clear the Spare Tire on a Jeep Liberty and Allow Rear Door to Open
    To determine if the NEO2 Bike Rack, # B01748, will clear the spare tire on your Jeep Liberty, we will need to do some measuring. This bike rack measures 12 inches from the center of the hitch pin hole to the closest part of the rack. You will want to measure from the center of the hitch pin hole on your trailer hitch to the furthest point on your spare tire. If that measurement is less than 12 inches then this bike rack will clear your spare tire. There are a few more things you will...
    view full answer...


< Previous
123. . .4




Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee John S
Video by:
John S
Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Carrie H
Updated by:
Carrie H
Employee Savanna B
Installed by:
Savanna B
Employee Evangeline M
Test Fit:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


<