Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount
(298 reviews)
Price: $186.00
In Stock
Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount
Item # S64663
Retail:$252.99
Our Price: $186.00
You Save: $66.99
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (298)
- Q & A (0)
- Photos
Swagman RV and Camper Bike Racks - S64663
- RV Bumper Rack
- Motorhome
- Travel Trailer
- Fifth Wheel
- 2 Bikes
- Mountain Bikes
- Road Bikes
- Womens Bikes
- Fits 2 Inch Hitch
- Platform Rack
- Swagman
This versatile 2-bike rack is great for everyday use and for vacations. It slides into the 2" hitch on your car, truck, or SUV, and it bolts to the bumper on your RV. Includes all the hardware necessary to quickly swap between vehicles.
Features:
- Platform bike rack carries 2 bikes using your vehicle's hitch receiver or your RV's bumper
- Included adapter fits a continuously welded steel RV bumper
- Padded hooks on ratcheting arms hold bikes securely by the frame
- Sliding wheel hoops let you carry bikes with different wheelbases
- Pull pins allow mast to fold down and wheel trays to fold up for storage
- Anti-rattle hitch pin reduces movement of rack in hitch receiver
- Padlocks (sold separately) deter theft of your bikes and the rack
- Durable steel construction with black powder coat is rust resistant
Specs:
- Application: 2" x 2" trailer hitch receivers or 4" - 4-1/2" tall RV bumpers
- Carrying capacity: 2 bikes
- Weight capacity: 35 lbs per bike
- Distance from center of hitch pin hole to:
- Edge of upright arm: 10-1/2"
- First wheel hoop: 8"
- Maximum tire width: 3.5"
- Maximum wheelbase: 52"
- Weight: 36 lbs
- Limited lifetime warranty
Versatile Bike Rack
This versatile 2-bike rack is perfect for use with your car, truck, or SUV, as well as your recreational vehicle. It mounts in your vehicle's 2" hitch receiver, or you can mount it to your RV bumper with the included adapter. To install the rack on your RV, simply slide the sleeve over the shank and insert the hitch pin. Place the included plate under your RV's bumper and bolt the sleeve to it.
Padded, Ratcheting Hooks
The mast has a pair of ratcheting hooks that hold your bikes securely by the top tube. And because they move independently, you can carry bikes of different shapes and sizes. The hooks have soft padding that won't scratch or scuff your bike's paint.
Sliding Wheel Hoops
The rack has wheel hoops that provide a stable base for mounting your bikes. Each hoop has a hand knob that lets you easily slide it along the tray to accommodate your bike's wheelbase.
Folding Design
You can fold the mast down for easy access to the rear of your RV. Simply pull the pin at the base of the mast and fold it down in either direction. You can also fold the trays up against the mast for storage. Just pull the pins at the junctions where the trays meet the rack, fold the trays up, and reinsert the pins into the provided holes.
64663 Swagman XC2 Traveler Platform-Style 2 Bike Carrier for 2" Hitches or RV Bumpers - Tilting
Installation Details
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount - S64663
Average Customer Rating: 4.7 out of 5 stars (298 Customer Reviews)
This versatile 2-bike rack is great for everyday use and for vacations. It slides into the 2" hitch on your car, truck, or SUV, and it bolts to the bumper on your RV. Includes all the hardware necessary to quickly swap between vehicles.by: Tim E02/24/2024
Works great! Our bikes have low cross bars so it took a bit to figure out the "sweet spot" for the holding arms. Finally get the bikes out of the camper when traveling; yipee!
by: Roland11/25/2021
Bike Carrier works well. Quick and easy install and bike setup.
However, I had to modify hitch extension bar supplied by 2” to avoid handle bar coming in contact with camper.
by: Tamara C09/16/2013
..we received our Swagman bike carrier in just 3 days after placing our order on a Saturday! We got our confirmation in minutes and the shipping info followed an hr later. WOW..great service !! The carrier was easy breezy to put together (approx 10 min) and then another 10-15 to place on the trailer bumper. We just got back from a week long trip..used our bikes every day. They were SO easy to get on and off. We wondered why we didn't buy from you sooner!!! All in all..a Great bike rack.
Tamara C.
9/17/2014
Hi Patrick!We still LOVE our Swagman! It goes with us on all of our camping adventures. Sometimes we see vehicles on the way.. with their bicycle tires flapping around and we always say..they should have gotten a swagman!! Ha ha. We will continue to share with our fellow campers how easy E-Trailer.Com was to use. Thanks for the email and your great customer service!Tamara C.Kennewick, WA
by: Chad S. 06/27/2017
Good product and seems to hold the bikes pretty good. The only issue I have is that the handlebars from one of my bicycles hits the RV housing. If you get this product and install it, please keep in mind that you will probably have to pad the one side of the handgrip. I have a spare tire attachment as well that I had to move. No big deal. Just that it's covering up the license plate now. We'll see how long it takes the "fuzz" to pull me over and tell me about this. LOL!
Chad S.
6/27/2018
Still working great! Havent been pulled over yet for partial blocking the RV plate. Still sticking to my original comment about padding the handle bars against the RV.
by: Mick (NY TRUCKER)06/16/2013
I used this hitch in a very different way, I bolted it backwards to my deck plate on Peterbilt 387 tractor so that my wife & I could carry our bikes on our cross country runs. It works real well. After 8 years of use and the abuse of salty winter roads my first one was getting in tough shape so I replaced it with another new one of the same model. It's a very sturdy unit and gave me years of dependable service, would highly recommend it to anyone. Here is a photo of the old one in service a few months before I replaced it.
Mick T.
6/16/2014
This hitch does a super job in a very tough environment being that mine is installed on a Class 8 vehicle, a Peterbilt 387, behind the cab
by: Ralph06/15/2018
can't use it with my Montana 3731FL 5th wheel, the bumper set a little under the back of the RV so I can't bolt the rack to the bumper.
Rachael H.
7/11/2018
I have looked through our other bumper mount hitch options that we have for an RV and most of them would still interfere with how your bumper is recessed under your trailer. I am sorry this did not not work for another option that you might consider would be a ladder bike rack. I have included those here for your reference. I did speak with our representatives at Swagman and if you have the clearance you can mount the receiver portion on the underside of your bumper, but that looks like it would be difficult as well. All the other RV bumper mounted hitch will need access to both sides to properly secure the hitch to the RV bumper, and I can see that you bumper may not provide that access.
Helpful Links
by: Neil07/18/2022
This is a very solid and heavy-duty bike rack. Mount to RV bumper is sturdy and secure with bolts to prevent rattling. Due to concern from stories of bumpers separating, I added two unistrut braces tying back to the hitch frame. Had to use bumper mount versus hitch to leave room for the spare tire mount.
I partly rotated bike handlebars closest to trailer (off-center from wheel) to prevent them from rubbing the back of the trailer. Good bike lock secures everything in place.
by: Jus05/09/2024
Work great on the back of my 5th wheel to carry two bicycles
by: DBArvadaCO08/04/2017
Bought this Swagman bike rack so we could take our mountain bikes camping and use the rack on either our truck or our 5th wheel. It's a sturdy rack that's relatively easy to use. Releasing the hold-down hooks can be difficult at times, but not a big deal. Once you get the tire hoops set in the right position it's easy to get the bikes secured on the rack. In short, I would buy this rack again. There are some nicer racks out there that might be easier to use, but they cost a lot more. This one is the best bang for the buck that I've found.
by: Joe C08/18/2022
Great rack. Road well on the back of my travel trailer from Parker Az to Florida.
Joe C.
8/19/2023
Still holding up. Have lost a bolt that holds the wheel braces but other than that no issues. We have taken the trailer and bike rack back across America this year and are currently in Montana.
by: David09/08/2019
I recently completed the assembly of the bike rack. The rack comes to you about 3/4 assembled. The process is fairly painless if you are just a little bit mechanically inclined.
I found the rack to be well made with some nice adjustable features. The clamps that hold the bikes in place are of two different sizes ( height or length). This allow us to use the shorter one on my wife's bike and the longer one on my bike. The adjustable wheel cradles are easy to adjust to different bike lengths.
Haven't driven down the road with the bikes loaded but I don't see any issue with the rack in that regard. I will be cutting a hole in a tennis ball to put on the handle bar closest to the back of the camper.
The rack appears to be solid. I did choose to go with the optionally available locking pin as well. This really solidified the feel of the rack.
by: Steve M07/05/2016
I was looking for a rack that minimize impact to rear-view window visibility, as my wife felt uncomfortable with the blockage caused by most racks. This was the only rack where there was no rise at all from the hitch - it comes flat because it's mostly designed for attaching to an RV. Well, the ground clearance is still a foot and that works fine. The rack appears very steady after the install. It also folds compactly when not in use. I have not yet had an opportunity to take it on a ride.
The instructions for putting the rack together could have been clearer, which is why I'm taking off 1 star.
by: JT08/02/2023
It is perfect for two bikes. The wheel holders are adjustable as well as the over-frame bars, which lock the bikes into position. It is rugged and durable and I would highly recommend it!
by: John w08/29/2022
Just got done installing it on my 5th wheel camper. All brackets seam to be solidly built and not wobbly.
by: Hillis K05/23/2018
Bike rack was easy to assemble. We wanted a bike rack for our 5th wheel to fit on the bumper and still retain the roof ladder that's in the middle of the bumper. After tightening the hitch bolt, it is very sturdy.
by: Tim K06/05/2012
This was an extremely smooth transaction from purchase to product arrival. Etrailer.com kept me informed from order conformation to product shipment and shipment tracking. Staff was very helpful when I placed the order. The bike rack was exactly as advertised and in actual use, the only issue was with the innermost bicycle's handlebar came into contact with the motorhome (see attached photo). I resolved this by loosening the handlebars and twisting them to run parallel with the motorhome. Other applications may not have this problem, based on the design of the individual motorhome. I'm pleased with the build quality of the bike rack and I think I will get many years of reliable service from it. I would recommend both etrailer.com and this bike rack to anyone looking for a similar product.
by: Joseph 05/04/2024
Quick delivery, everything was there and it was easy to install.
by: Jessica10/31/2017
We received the above bike rack and found it easy to put together. We installed it yesterday and we are very satisfied. Going on the road soon, so can’t give a full review just yet. But, etrailer’s service is outstanding.
Ernie Pagan
by: Steve04/18/2020
The bike rack is incredibly easy to put together. It was easy to install. I purchased the big tire accessory and it works perfectly for our fat tire sikk beach cruiser bikes. It folds up and stores easily. Great purchase. Also shipping was timely and without a problem.
by: Larry07/26/2020
Works great, holds the bikes from the wheels with no movement. Took it on trails and the mountain bikes did not move.
by: Jon09/11/2015
This was exactly what I was looking for.... As always etrailer's packing and shipping was super.... Already attached the bike rack to the RV bumper and tried it on the 2011 Rav4 as well... In a word.... Perfect.... Thanks etrailer!
by: Deborah04/20/2020
Love the carrier I had been on my husband for a couple years to get a carrier because he had been putting them in the back of the truck with a topper He is not getting any younger and each year was getting harder Finally convinced him Chose your carrier and he is well pleased and it makes it so much more enjoyable to go biking
by: Johnny 04/28/2023
We have used the rack on both our camper and our truck. It works well on both. We have to adjust one of the bike handles and seat to get them to fit behind the camper, but it's not hard to do. The rack is well-built and sturdy. We are very pleased with our purchase and would buy it again.
by: Craig03/14/2023
Our second trip out on of the bikes came off and we didn't realize it until we were 40 miles from home. Ending up finding it . Now I strap them on. Both are $700 bikes and now mine is all scratched up.
Brooke M.
3/29/2023
To be honest, I would not recommend this bike rack for seven hundred dollar bikes because it is frame mounted. If you have alternate frames or womens bikes that you are carrying with this rack, the hook may not have had a very snug grip because of the way the frame tils away from the hook. An adapter like part # 64005 would help remedy this issue and give you a better contact point. But if you are in the market for a better quality rack for your bikes, I recommend part # KU98VR. It is more expensive but, in addition to other features, it is a wheel mounted bike rack meaning it holds the wheels instead of the frame of your bike. It has an option strap kit in case your bikes have fenders as well.
by: William Evans01/09/2015
The bike rack was very nice. The construction was sturdy and easy to assemble. It really looks great on our new Jayco RV that we are getting ready to travel to Florida with. We can now travel with confidence that our bikes will arive safely with us in Florida. Thank you for a great product! We are very happy!
25
298
Show More Reviews
See what our Experts say about this Swagman RV and Camper Bike Racks
- Why is a Bike Rack Not Rated for Use on a Flat-Towed VehicleBike racks are tested under different situations to make sure they can stand up to the unique conditions of each. Flat-towed vehicles, for example, have more sway and bounce than if they are driving themselves. When a manufacturer states that their rack is not for flat-towed vehicles, it means that the rack performs well under regular driving conditions, but it cannot stand up to the additional sway and bounce of the vehicle when it's flat-towed. The Swagman Current, part # S64678, that...
view full answer... - Bike Rack Recommendation for Ram Truck and Rear of Travel TrailerYou will need a bike rack confirmed to fit the rougher ride quality found at the rear of a trailer. The most popular option would be the Swagman Platform part # S64663 which is designed to fit a 2 inch hitch but with a 2 to 2-1/2 inch hitch adapter like part # C45405 that rack could also fit a 2-1/2 inch hitch. This rack has a ton of great reviews from our customers because of how well it is constructed and how easy it is to use. I attached a review video for you to check out as well.
view full answer... - Bike Rack Solution for Rear of Vehicle that is Towing TrailerThe shank of the Swagman Traveler XCS # S64664 has a rise of 17-3/8 inches built into it. But if that is not high enough to get the bike rack above the frame rails of your trailer you may instead be interested in the bike rack bunk part # CC-275 that will hold the bike rack above the frame rails of the trailer you are towing instead. This is a great solution that works for most people. Check out the review video I attached for more info. A common bike rack used with this is the Swagman...
view full answer... - Bumper Mounted Trailer Hitch Recommendation for 2 inch BumperThe best solution I can provide for you would be a trailer bumper hitch like the part # C19101. This hitch is designed to attach to 2 by 4 inch bumpers, but with a 2 inch spacer you could attach it to your 2 by 2 inch bumper. You would need to provide your own spacer. Or you could go with a frame mounted hitch like the part # 13703. As long as your frame is between 22 and 72 inches this hitch would work well for you. You will need to be sure that you are using a bike rack designed for...
view full answer... - Recommended Bike Rack to Be Used on the Rear of Motor HomeOne of our most popular hitch bike racks that can be used on the rear of a motor home is the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers, part # S64670. This is a platform style rack for easy loading and will work with many different designs of bike frames. I am including links to the installation instructions on the Swagman bike rack and a video review of the same bike rack. I am also including a link to a list of bike racks that can be used on the rear of a RV or...
view full answer... - Bike Rack Carrier For 2020 Ford Edge ST Towing A Tear Trailer With Class II Hitch ReceiverWith your 2020 Ford Edge ST having a Class II receiver I recommend using a bike rack that will mount on your teardrop trailer. I have 2 different types that will work with different trailer frames. The Stromberg Carlson Bike Bunk # CC-275 will mount to the front of an A-frame trailer. It fits A-frame widths of 12"-52" and provides you with a 2" receiver that you will be able to use trailer style bike rack with bikes up to 200lbs. The Swagman Traveler XC2 Bike Rack # S64663 is an example...
view full answer... - Is Yakima BackSwing Swing Away Hitch Extender # Y02483 compatible Swagman Traveler XC2 # S64663Yes, the Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount # S64663 will be compatible with the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches # Y02483. One thing to remember, The Yakima BackSwing Swing Away Hitch Extender will work great on your 2000 Honda CR-V, and other passenger vehicles, but it is not rated for use on RVs or trailers.
view full answer... - Is the Swagman Traveler XC2 # S64663 Compatible with the Yakima BackSwing Swing Away Hitch Extender?Yes, the Yakima BackSwing Swing Away # Y02483 will work with the Swagman Traveler XC2 # S64663. The Traveler XC2 is compatible with 2-inch hitches (not a combo hitch designed for 1-1/4 and 2-inch hitches). If you have a 2-inch hitch receiver, the Traveler XC2 does not require an adapter. If you need a 2-inch hitch receiver recommendation, I would be happy to assist you if you provide the year/make/model of your vehicle.
view full answer... - Comparing The Swagman Original And Traveler XC2 Bike Racks Platform racks tend to be a much more stable option compared to hanging racks since there's less movement of the bikes with the wheels being in the holders. Hanging racks tend to have a bit more side-to-side play and have the bikes sit closer to each other so you could run into an issue with one bike rubbing against another and potentially scratching it. Both the Swagman Original # S64152-2 and Traveler XC2 # S64663 have a 35lb per bike weight capacity so the only benefit the Original...
view full answer... - Troubleshooting Installation Of A Swagman Traveler XC2 Bike Rack On A Trucks 2 ReceiverThe Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers # S64663 is designed to work with the 2" receiver on your truck as well as the included RV bumper mount receiver so you should have no problems using the threaded hitch pin on your truck's receiver. It sounds like either the threads on the hitch pin are stripped or the hitch pin hole on your truck's receiver is too far back for the shank of the bike rack. If you could provide some pictures and additional details of...
view full answer... - Hitch and Bike Rack Recommendations For Carrying 2 Bikes on the Bumper of an RVWe sell RV bumper hitches that would work well for you to carry an RV rated bike rack at the rear of your Montana 5th wheel trailer. If you have a 2 inch square bumper I would recommend the Curt Hitch part # C19101. If you have a 4 inch square bumper I would recommend the Curt Hitch part # E-100. Now for a bike rack you will need to get a rack that is rated for use behind an RV. The ride is much rougher at the rear of an RV when compared to a passenger vehicle, so a rack not rated for...
view full answer... - Can Rear Hitch Receiver on 2020 Forest River Rockwood Mini Lite Fit Bike Rack?You can use the rear hitch receiver on your 2020 Forest River Rockwood MiniLite. For your specific bikes, I recommend the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 which is rated for travel trailer use as long as your bikes are not over 35 lbs each. If the low step-thru bike frame is too low then using a bike adapter bar like the Swagman # 64005 can be used to create a top frame rail for the hook. To secure your bikes you can use a cable lock like # e98891...
view full answer... - Options to Carry 4 Bikes With 2021 Lance 2185 Travel TrailerOk, we have some options for you, and I should note that bike racks do need to be approved by their manufacturer for the use on the back of travel trailers like your 2021 Lance 2185. There aren't any travel trailer approved racks for a 1-1/4 inch hitch, but from what I could see it does look like this trailer has a bumper. So what you can do to add bikes in the rear of the trailer, so long as the bumper is 4 to 4-1/2 inches tall, is add a Swagman rack: - Swagman Traveler XC2 Bike Rack...
view full answer... - Will The Swagman RV Bumper Bike Rack Work On A 2013 Toyota Tundra Front HitchWhile the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 may work, I recommend the Swagman XTC2 bike rack part # S64670 instead. This rack has a proven track record of successful use on front hitches while the # S64663 is really intended for RV bumper use. The XTC2 is a very popular bike rack we offer, highly rated by our customers and is easy to use. Because the rack has an angled shank it provides three inches of additional ground clearance. This is important...
view full answer... - Swagman Platform Bike Rack Recommendation for Use Behind an RVThe Swagman XTC2 Bike Rack part # S64670 is a great rack, the only problem is that it is not designed to work at the back of an RV or trailer. The ride quality at the back of an RV is much rougher than the back of a passenger vehicle. Because of this only certain racks have been designed to work there. For a similar rack that would work at the back of an RV (and actually this comes with the # S64025) you would want the Swagman Platform-Style 2 Bike Rack # S64663. This rack has been confirmed...
view full answer... - Weight of Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 referenced in your question weighs in at just about 47 pounds. This is a really nice and unique bike carrier mount that will attach to the A-frame of your trailer tongue. It features a sturdy, all-steel design and has a weight capacity of 100 pounds. It is compatible with 2 inch hitch-mounted bike racks that are approved for use behind an RV, such as the excellent Swagman Platform-Style 2 Bike Rack # S64663. I...
view full answer... - Hitch Recommendations for a 2014 Cruiser RV, Radiance 24BHDS Travel Trailer for Bike RackThe Curt Hitch part # 13703 that you referenced is a great hitch and the one we recommend the most because of it's wide range of trailer frames it fits. It fits frames that are 22 to 72 inches in width. Another option is the Utra-Fab # UF35-946403, but this is a weld-on hitch. Now for a bike rack you will need one approved for the much rougher ride quality that is present at the rear of RVs and travel trailers. For that you can check out the link I provided that has all of the RV bike...
view full answer... - Does Lippert Jack It Bike Rack Have to Use Angled PieceI see what you are saying and yes, the Jack-It 2 Bike Rack # LC429756 does need to use the angled portion because the top portion does not have a bolt hole in the right spot to be able to not use that piece (see accompanying photo). The best option for you to carry a couple bikes with your trailer is with the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663. If you have a 4" or 4-1/2" square bumper this will fit right to that, or you will need this rack plus the...
view full answer...
- Compatibility of the Swagman Bike Rack 64663 with 2016 Subaru Crosstrek The Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 will work with the 2 inch receiver on your 2016 Subaru Crosstrek Hybrid. It has a 8 inch measurement from the hitch pin hole to the closest edge of the wheel hoop so you will have the clearance needed. This is my recommendation for you because it will give you the options you seek. The Swagman XC 2-Bike Rack Platform Style for 1-1/4" and 2" Trailer Hitches # S64650 will give you about 2-1/2 inches more clearance,...
view full answer... - What is the Difference Between Swagman Bike Rack # S64663 and # 64663The S in front of Swagman bike rack # S64663 is just our part number. The S indicates Swagman in this case. It is not any different from the manufacturer part number 64663. I have included a link to the installation details for you to view.
view full answer... - How To Transport 4 Bikes On The Back Of A Travel TrailerI have a solution for you, however, there are not any 4-bike platform carriers that are compatible with a travel trailer. This is because it is difficult for a bike rack to hold the weight of 4 bikes while also taking on the excess stress and bounce of the travel trailer. I recommend looking into the Swagman Platform-Style 2 Bike Carrier # S64663 which holds 2 bikes. There is not a travel trailer-approved platform rack that can hold more than 2 bikes. For the remaining 2 bikes you could...
view full answer... - Can Bent Towing Receiver # SP325 be Used with Swagman Platform-Style 2 Bike Rack # S64663I spoke with my contact at Swagman and yes, the Bent Towing Receiver, # SP325, can be used with your Swagman Platform-Style 2 Bike Rack, # S64663. The Bent Towing Receiver, # SP325, is designed to slide over 2-inch square ball mounts so it will work with the Brophy Ball Mount, # EA40. As for being able to pull a car on a dolly and also have the bike mounted to the RV, you will want to check the tongue weight and towing capacity of your RV as well as the capacity of the hitch. Your towing...
view full answer... - How to Carry 2 Bikes on an RV With a Trailer Hitch Cargo CarrierI have some options for you but connecting a bike rack to your cargo carrier is not something I recommend. The cargo carriers that have an opening on them aren't intended to be used as a hitch extender. Depending on the cargo carrier you have the Swagman Traveler XCS # S64663 could be the solution. The XCS slides over the tube of a ball mount that fits into a 2 inch hitch receiver. I verified with Swagman that it doesn't have to be a ball mount for a trailer and the tube of a cargo...
view full answer... - Best Swagman Bike Rack for Camper with 4x4 BumperI have the perfect alternative for you but the Swagman XC 2-Bike Rack Platform Style part # S64650 (29 lbs) is not rated for use on a camper so I cannot recommend you use this for that application. However, the Swagman Platform-Style 2 Bike Rack part # S64663 (41 lbs) which is exactly the same bike rack for the exception of the shank is rated for use on a camper and even has a trailer hitch receiver tube built in for a 4" x 4" bumper so it will be perfect for you. I have attached a review...
view full answer...
Do you have a question about this RV and Camper Bike Rack?
Info for this part was:
Updated by:
Leah B
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Matthew S
Updated by:
Noah M
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Tyler C
Video by:
Jacob T
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
11/29/2021
I recommend using a hitch extender like part # HE06 as it will add 7 and three eights inches to the hitch. It will also through reduce the hitch capacity be 50 percent, including the tongue weight. You can secure it to the hitch with a hitch pin part # PC3 or lock part # e98880.
Helpful Links
Hitch-AdaptersBrophyHE06.html
Hitch-Pins-and-ClipsDraw-TitePC3.html
Trailer-Hitch-Locketrailere98880.html