To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These 54" long aluminum crossbars give you plenty of room to haul gear, whether it’s a kayak, cargo box, or camping load. The strong construction supports up to 165 lbs while keeping things lightweight and rust-resistant. With the full-length design, you’re not limited on accessory spacing—there’s enough bar for everything you need to bring.
This complete roof rack system includes two Vortex crossbars, four 2500 Series legs, and a custom fit kit that mounts directly to your vehicle’s naked roof. The setup locks in tight for a confident hold without drilling or permanent modifications. Once installed, the lockable cover plates on the legs keep the rack secure and steady mile after mile.
Roof racks can sometimes whistle or hum in the wind, but these aero-style bars are built to keep things quiet. The rubberized Vortex strips fill the top channels, helping reduce drag and wind noise as you drive. You’ll notice smoother airflow on long highway stretches and less vibration when the road opens up.
No matter how you adventure—hauling bikes, skis, or a rooftop box—these bars have you covered. They work with both channel-mount accessories and clamp-on attachments, so you can use your existing gear or add new mounts later. From weekend water trips to long road hauls, this rack setup adapts easily to every season.
The integrated plastic locks in the crossbars help deter theft of channel-mounted gear when you’re parked at a trailhead or rest stop. For an extra layer of protection, you can upgrade to all-metal locks (RRVA-LEC4 - sold separately). It’s a simple step that keeps your setup more secure when your vehicle’s out of sight.
Ratings & Reviews
I decided on the 65” instead of the recommended 59” for my 2018 F250 Crew. Before I did I called etrailer to confirm that the crossbar would be ok using the custom DK Fit and Rhino Rack 2500 series legs. The guy confirmed and I placed the order. Everything does fit and quality is great but all I received was measurements using the 59” bar. Something is different between these two bars and etrailer couldn’t help me out.
I figured it out myself and determined the bracket distance on the bar so it fit properly.
Rhino Rack should offer the proper bracket measurements for all 3 Areo Crossbars ( 59, 65 and 72 ) as they pertain to Ford F-250 “17” and up. They all fit - as bracket is in the same spot on the truck.
Great quality solid rack. I’d give 5 star if it wasn’t for this
Been wanting to get a roof rack for my small Honda H-RV suv for some time now. Finally decided to pull the trigger on one and opted for this Rhino rack system.
Watching the etrailer install video and following the manufacturer's instruction, the front rack went on easily and perfectly. However, the rear track turned out to be a very long process. Why? Because I thought the manufacturer's measurements for the rear was an error. After the rack was assembled, it didn't seat into the roof channel at all. It appeared to be well short. So, I proceeded to use my mechanical ingenuity to get this rack to fit on my own. After a lengthy span of time and numerous adjustments, I'd come to realize that the manufacturer's measurements were correct. The footing did not sit perfectly until the unit was fully tightened against the vehicle. Live and learn.....once again.
The rack is absolutely solid, and looks very clean and sharp on top of the H-RV. I could not detect any additional noise while driving, even at highway speed.
The main purpose of this roof rack was for transporting my recreational kayak. I was not aware that these bars had a rubber strip running along the entire top of the bar. This turned out to be perfect for the kayak. Now, I didn't need to buy a specific kayak cradle. The kayak, one strapped down, is held absolutely secured to the rack.
I am very happy with this product! Once again, etrailer comes through perfectly with another of my order. Prompt service and indepth product info are the reasons why I shop here!
Purchased a Rhino Rack custom fit rooftop system, along with the kayak rack to hold two kayaks and the Swagman rv bike rack. Made several trips and they all work great! Included photos to share.
I am very happy with my purchase of the 2500 Series Rhino Roof Rack system from etrailer. I wanted to transport a Mohawk Intrepid 16’ canoe from Pagosa Springs to my home in Albuquerque that my good friend left me when he passed. We used to run the Chama River from El Vado Dam to just short of Big Eddy, a great overnight trip of 22 miles. I didn’t know what I needed in a roof rack for my Toyota Tacoma full cab but Alyssa at etrailer was very helpful and so pleasant. The delivery was quick and the installation was pretty easy (the videos on etrailer’s website were a big help). The day I drove from Pagosa to ABQ, Feb 26, 2023, it was very windy, 40 mph gusting to 60 mph! Not an ideal day to be carrying a canoe on the roof! But the Rhino Rack was rock solid and the canoe didn’t budge, even though my truck was getting getting pushed around. I’ve left the rack on because I like the way it looks! (PS. I added another strap to the back rack after I took the photo) Highly recommend etrailer to anyone considering purchasing a roof rack!
The Rhino Rack is very well made. I installed it my self on our 2016 Ford Escape, but had an assist from my wife to fine tune it at the end. There was no whistling or any other distracting wind noise on our 3,500 mile drive to visit family out West. A Sear's Cargo Box was easily mounted to the Rhino Rack and it remained centered and secured at western highway speed limits plus. The included locks on the roof mounts were the selling point for me. The Rhino Rack remained securely mounted to the roof with no additional adjustments or tightening being needed. Great Product. Donna P. @ etrailer was super with the order.
This roof rack works great! At first I was skeptical about putting a rack on my IS250, but it couldn't have turned out better. Paired with the Yakima Highroad, I can easily transport my bikes around without worrying about anything coming loose while driving. The installation instructions for the legs and bars are pretty straightforward. Takes about 30-45 minutes total to install.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
I bought this last yr to haul my kayaks on my Toyota camry. Being 5'2", getting them on top of my SUV was next to impossible for me and my daughters. Since then, I have traveled from Michigan, all the way to the west coast with two 13' ft kayaks. These racks have been absolutely perfect in every aspect. I mounted them myself, and checked them regularly to see if they needed adjusted. Not once did they loosen or move. They with stood Traveling with speed limits reaching 80 mph on I84, along with the windy weather on our cross-country trip. My car moved around from the high winds, and the racks stayed put. These racks have by far reached and surpassed every expectation I had when purchasing them. I would not recommend another. Only thing I would recommend is showing installation for both front and back bars, since the measurements are slightly different for both. As I had to figure this out my self, after watching the installation video. Thank you Rhino for providing such a high quality product.
Extremely sturdy and well made. I also like the locking endcap design. Only thing I dodnt like is the rubber channel strip is 4 separate pieces instead of one long strip. Maybe they do that so you can remove a section for installing accessories, but id prefer to simply cut it where needed.
We love these racks! They were easy to install with the website videos. They whistle a bit but honestly it’s not terrible. The racks we got for our kayaks fit perfectly. Bonus - I can still open the panoramic roof!
Very straight forward to install. Took about a half hour in total. No whistling whatsoever. They look awesome on my 2016 Ford Explorer Sport! Especially with my running boards and tires...
Waiting on my Rhino basket to get here to install that next!
This is Thai Khuu ,Thanks I got packaged ,and I already installed, It just take about 1 and 1/2 hour,but I just take time to do carefully,so it is took me 2 hours, It is great ,me and my wife like it,and I my order the other package exactly like this for my second acura mdx 2016, I enclosed the pictures installed roof rack , Thanks
Perfect. Low Profile, Looks Good. Solid Rack System. Had a year and Highly recommend
I used this rack to mount two 65lbs kayaks to my vehicle and travel. One of many trips was over a thousand miles (round trip) and they moved maybe half a centimeter a piece during. I was extremely pleased with how easily I could adjust them. The original shipment had everything that was supposed to be in it and the directions were realitively clear. I had them together and on in roughly an hour. Also, they look great. When they are off the roof the only issue I have arises. The rubber feet that sit directly on the roof tend to fall off easily. Not a big deal.
Solid platform for all your gear. Easy to install and adjust, great looking as well. Initially I was frustrated because I failed to insert the plastic ruler under the cross bar. If you don't cover all the gaps they will whistle like crazy!
The instructions don't tell you that...I had to call Rhino tech support. They are quiet now at any speed.
I'd buy them again for sure!
The instructions were clear and the rack installed perfectly. I am impressed with the custom foot mouldings that match my car's contours exactly, and the rack is still as tight as when I installed it 4 weeks ago. I have been using it frequently to pick up 8' lumber for a large shelving project I have underway, and I hope to soon use it to carry my kayaks. The rubber strips on the top hold the lumber so securely I have no worry of having the load slip off the car. The two negatives I have are: (1) the crossbar end-caps consist of 2 locking and 2 slip-ons. I have come out to my car to see 1 of the slip-ons half slipped-off and I expect I will lose one or both of them in short order; and (2) the instructions should put the forward bar at least 1 inch further forward. As you will see in the photo, Rhino's guidelines result in the front bar being higher than the back bar, which results in additional wind pressure on the goods being carried. Finally, I would like to thank etrailer for shipping the product exactly as promised and also for packaging the entire order in an additional box as I requested. I found your service to be outstanding! You are welcome to post my comments and or photo if you should wish to.
The crossbars are great, but the rubber strip in the middle gets bunched up or comes out when loading heavy items across the bar. But the rubber provides grip, and the grip is amazing. I am not worried about kayaks or rafts sliding around. I do need longer ones though...
Fairly easy to install onto my 2017 Honda CR-V. The crossbars feel very sturdy and are securely attached to the vehicle. Took me about 30 minutes to get it installed and could be done even quicker if you get help from another person. The bars themselves are a little fat so my Thule ski rack has a super tight fit. There is very minimal wind noise, so I'll probably be getting a fairing for that. The instructions felt a bit jumbled but with just the measurements alone, you can install it with a bit of common sense.
i George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
Hi George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
I purchased a full kit for my 2017 Ford explorer, connectors, Feet and these cross bars. I will use them for hauling my roof top box on trips as well as other things that will not fit in my vehicle. The install is farily simple however some of the tools provided for tightening are not the best. Luckily I had a number of other tools to get this complete. The main thing I feel is needed is a socket allen key to tighten down the cross bars nice and tight. The allen key provided is difficult to work with and get the leverage you need to snug the bars down.
Another tip is to be sure to use the excess measuring closure to close off the inside of underside of the bars. Use a box cutter to cut the excess and fit it to the inside. I read some reviews about noise and I have zero noticeable noise. Do not tighten the bars down until you have this all inserted in and slid under the feet. Then snug it all down. If you do these things and close all the gaps the bars are almost silent.
The bars look great on the vehicle and seem very sturdy and solid. I would have no reservations hauling ladders, lumber and all of the typical stuff you see on roof racks. The rubber strips are heavy duty and add a nice non slip feel to the top of the bars.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
Got this for a 2015 Prius. High quality works great. Use their measurements included as a guide and measure everything out yourself before cutting the spacers and when installing. I had to make minor adjustments to make it perfect.
I give all 5 stars for the product and service, but...I prefer the parts to be all in one carboard, also I was a little panicking looking for blue plastic key...It was inside of cross-bar ??not falling out with strips. Anyway,
I"m owner of Honda cr-v 2022 with bare roof ,and I just installed the rack. Was it simple enough? Yes,so I can share this:
First, rubber pads are all the same, and after placements to plastic legs should be placed with arrow*out*-that is it(a lot of info regarding vertical parts, that they are all different)??
Second, on other hand, in video we informed that clamps are same -they are not. Bigger "hooks" are for rear bar, smaller ones-for the front one.
Third, do not expect precision in rubber pads position(especially on rear bar)regarding plastic rail strips on bare roof.it is not achievable, just try to make same look on both sides.
I was worried about rain and water gets inside. Well, let us see.
What I plan to care on rack? Just a small 6ft step ladder. Believe me or no CR-V is my business vehicle ,and ladder carry was the goal of rack purchase. And only question I have if I can get to underground parking with no problems to cross the front entries usually limited with 6 ft in heights I will find out soon, but rack height plus ladder on it makes me worry.??The review will be update soon. regards.
I own a 2013 Honda CRV I purchased a couple months ago. It has a naked roof and no rack or side bars, and I wanted to be able to carry up to three kayaks. I didn't really want to buy and install the side bars, and then the cross bars also. I also needed the cross bars to be a little wider than the vehicle itself, as I own two Ocean Kayak Scupper Pros, and a Venus.
This Rhino Rack package looked like a great option for my needs. Weight wise, the three boats come right to the limit. Other racks had lower weight limits, and wouldn't work.
I had a couple issues with the initial package, but etrailer took care of the problem right away, and sent out what I needed.
Installation was pretty smooth. I recommend reading and rereading the instructions, before you cut anything. The videos on the etrailer website or directly on YouTube are very helpful to see all the steps. I'd like to see more personalized instructions added in the future, just to to make everything even smoother. Make sure you identify your vehicle and the bar you received on the kit instructions before you start.
These bars are so wonderful. The aero bars make no noise when driving and no whistling that I can tell. They don't seem to effect my gas mileage. I made sure the top rubber strips and bottom measurement strips were cut perfectly with no gaps, as this is important to prevent whistling.
They look so stylish. I get complements on them, and people can't believe they are after market, and that I installed them myself. They really complement the vehicle. Once installed the first time, I can take them off or put then back on in about 12 minutes. I don't really plan to take them off though. I don't use car washes, and I like the look of them on my vehicle.
I made sure to not overtighten them, and then tightened them a few times over the next week and with a couple kayaking trips. These babies are strong and I can't make them move when I test them. I still check them regularly to make sure they are secure, for safety purposes.
I highly recommend this Rhino Rack package. They know how to make the perfect roof rack and you can tell the quality and thought that went into them. Look at my photos I have included.
Thank you to etrailer for such great service. You made the whole process so pleasant and easy.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.