Recommended Roof Rack and Cargo Carrier for 2013 Toyota Corolla

Question

Question:

Thanks Jason. When you say drilling is required, can you be more specific? What will I be drilling into? I don't see that detail in the spec online.

asked by: Ben

0

Expert Reply:

For your 2013 Toyota Corolla, I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2, the 2500 Series Legs # RRRLKVA, and the Custom DK Fit Kit # DK152. This is a confirmed fit for your vehicle. I also recommend the metal lock cores # RRVA-LEC4 for when you use the T-channel mounting for accessories that have that mount that fits in the slot on top of your crossbars instead of wrapping around them.

Then for your rooftop cargo carrier, I recommend the Thule Force XT Rooftop Cargo Box - 22 cu ft # TH6359B. I've attached a video of this installation that also gives you some of the features. This is a very durable box that will give you plenty of cargo space and is easy to use with access from both sides of the vehicle.

expert reply by: Jason S

0

Ben

7/19/2018

Thanks for the reply. The Thule is beyond my price range, I was hoping to keep the entire purchase under $750. Can you tell me the major differences between this Thule and the Cartop Cargo Box 18 cu ft? Also, could a cargo bag be an affordable alternative?

Jason S.

7/19/2018

There are more economical options that will work well for your 2013 Toyota Corolla. I recommend the SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 50" Long # SR1002. Then you can use the SportRack Horizon Rooftop Cargo Box - 16 cu ft - Black # SR7016. This box weighs 43 lbs giving you a load capacity of 67 lbs on your roof based on the vehicle roof capacity rating of 110 lbs.

Ben

8/1/2018

Jason, is the Cartop Cargo 18cuft too big for my car?

Jason S.

8/1/2018

The Car Top Cargo Rooftop Cargo Box CTC-18S will work for your system. It has external dimensions of 56-1/2" long x 38-3/4" wide x 19" tall and the crossbar spread can be anywhere from 22 inches minimum to 31 inches maximum. Drilling is required and it installs with U-bolts and hand knobs. It will be a great choice for you...sorry I missed that in your previous question.

See All (5) Replies to Ben ∨

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 9

Hey Mark, the only real downside to an offset ball like the Gen-Y part #GY43XR is going to be that it costs more typically and it would take up more room when stored compared to a non-offset ball like the #C38CR. The handling and weight carrying…

view full answer...

Answer 10

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

view full answer...

Answer 11

Hey Dave, congrats on the new truck and trailer. You're definitely going to want the extra clearance an offset gooseneck ball provides with a 6-3/4' bed. The Gen-Y gooseneck pin boxes do not help with turning clearance. For your 2026 Chevy…

view full answer...

Answer 12

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Recommended Roof Rack and Cargo Carrier for 2013 Toyota Corolla

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching