Arrives before Christmas 
6" Oval. All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Recessed mount with grommet (sold separately).
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we take a look at the Optronics Oval Fusion LED hardwired stop, tail, turn, backup, and warning trailer light. Has the red and the clear lens. Now this is an oval trailer tail light. Has a nice, smooth, bright red exterior and it'll serve five functions.
And I do have this hooked up to some 12 volt power so we'll go through those functions to see how it operates and how bright it is. So I'll first turn on our 12 volt power, and you'll see the taillight function come on. We'll go ahead and turn off the overhead lights, and there's what your taillights would look like. Now, when you do apply your brakes.. Now the taillights, if you notice, it's an outer band of 10 red LEDs that'll light up just like that.
And then when you apply your brakes, it's that same band of red, 10 red LEDs, and they'll just get brighter to let people know you're applying your brakes and stopping. And then if you turn on your turn signal, you can see that your turn signal, again, is the same outer band of 10 red LEDs that'll get brighter and they'll flash to let people know which direction you're turning in. And then, the next feature is the backup light. And just to show you how that operates, when you go into reverse, you'll see that that center X section, that is a clear lens, that lights up with six white LEDs to let people know you're going in reverse. And then the extra features on this, which is sort of unique on this light, is it offers warning lights.
And basically there's two wires, a green and an orange one. If you hook up just the green one and then you turn on the warning lights, what you'll get, you notice there is the four amber LEDs flashing, and that gives you a warning light. Now if we hook up just the orange wire and then we hit it, it gives you a warning light again. But this time it's flashing the six white LEDs. And then if you put those two together, the green and the orange, and then do the warning light, if you notice, it gives you the same flashing motion but you'll see it's alternating.
It's doing four amber LEDs, and then the next one is six white LEDs, and then back to four amber. So it goes back and forth. So it gives you a combination in that warning application. Now, this is a total of 20 LEDs in this light and it will give you four flash patterns that can be synchronized when multiple lights are connected by attaching the blue and yellow wires. Now, what I am gonna do, I'm gonna go ahead and turn off the overhead. Later on in this video, I'm gonna go through all these wires in the back here to tell you what colors and what they connect to. But let me first go through the light itself. We'll go through some features on it. It is a sonically sealed waterproof housing and lens unit, makes it submersible. It uses a durable SMT technology which is surface mount technology. This construction of the LED circuit board. It'll better withstand shock and vibration and allows from proof heat distribution. But as we mentioned, these include LEDs which will make great replacements for incandescent lights, 'cause they'll last 50 times longer. They are more efficient, provide brighter light with less power output, and of course no bulbs to replace or brutal filaments that are gonna break. And the LEDs do have a lifetime warranty. Just to show you the lens again, the red lens and a clear X lens in the middle, and it uses red, white, and amber LEDs. Basically the red lens with the red LEDs is for the stop, tail, and turn. The clear lens in the middle with white LEDs for the backup we showed you. And then the clear lens with white and amber LEDs for the warning light. Now to install this, it does require a rubber grommet. It is a recess grommet design. Now the rubber grommet is not included. We do sell that part separately on our website. It's usually listed on this product page as a related product. And it goes by a part number of A70GB. Now, as you can see, it is hardwired and ready to install. Wire length's about eight inches. And now we'll go through the wire configuration here. Start with the black wire. Black wire is for your taillights, white wires for your ground, the red is for your stop and turn, and then the brown is for your backup. Now the four remaining wires, the green we mentioned is for the amber warning light, the orange, white warning light. And then the blue and yellow, those are the ones we didn't go over. But the blue, when you hook that up it'll get lets you change your flash pattern of the warning lights and then the yellow, if you're gonna hook this to other lights with these features, it'll sync all the lights together using the yellow wire. Now this light is DOT, Department of Transportation compliant. Does meet the Federal Motor Vehicle Safety Standard 108 requirements for automotive lighting. It is a 12 volt light. And the last thing is just give you some dimensions on this overall length of it, one end to the other, six and a half inches long. Width on it, two and a quarter inches wide. And the depth on the side, right at one inch deep. But that should do it for the review on this Optronics Oval Fusion LED hardwired stop, tail, turn, backup, and warning trailer light.
Average Customer Rating: 4.8 out of 5 stars (258 Customer Reviews)
6" Oval. All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Recessed mount with grommet (sold separately).Great addition to the rear of my Hummer H1
Exact replacement to original that came with our cube truck. Ordering was easy and shipping was lightning quick. Thank you very much!
Web site is so easy to use. Parts are available and ship quickly. Kept in formed through the shipping process. Items arrived when scheduled. Have very please with the performance of the LED tail light.. 5 stars for this company and customer service...
One of the best trailer light kits I've ever had. Perfect fit for my trailer. Being able to have back-up lights now is a game changer and long overdue.
Very well made and I have no reservations that these lights will last a long time. I like the fact that they aren't overly bright while in running mode. Don't want to give an impression that brake lights are on until they are. When they are applied and ON there is no mistaking. Wonderful lights. Affordable and well made.
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
Bright light for tail, brake/stop, and back up are an excellent upgrade to the trailer.
Works perfectly. I had ordered a set a year ago or longer and one of them developed a short , so after hours of trying to figure out what the problem was, it was one of the lights I am replacing with this order.
Awesome tail lights! Bright for brake lights and bright for reverse lights backing up
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
Excellent service and expedited delivery! I ordered the wrong tail light not once but TWICE and the customer service was outstanding. They sent me a return shipping label via email and also emailed me during the whole process for returning the items that were wrong to answer any questions and make things as easy as possible. Very impressed. Also, can’t forget to mention I paid for standard shipping and received the items within 48 hours each time!
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
It was an easy install since my trailer wiring harness already had the wire there for the backup lights (on my trailer you only get the backup lights if you buy the more expensive $$$$ upgrade package from the factory). For basic safety reasons I think travel trailers should have a backup light anyway. Lights are surprisingly bright and I would do this again since it was relatively easy. Also,those WAGO wire connectors with some electric tape made this job go very smooth and know that my connections are secure.
These lights are great on my PU camper , a little over priced - probably as they are waterproof. Very bright back up and break/ turn lights . Running is more subdued, so as not to be mistaken for breaking
Used these on my 1985 custom pickup truck flatbed conversion, they look good and are very bright. Only complaint is that the wires come out of the unit in a "straight line " so you either have to "mill" a slot in the mounting panel or drill a large hole.
Lights worked perfectly and it was very easy to I stalled.
over the years Ive ordered a pile of parts, lights etc. and they have always shown up on time or actually a little earlier then told. keep up the killer work
The lights are great, they are well made and are holding up very well. The LED's are bright, so far so good. My only issue with the lights was not being informed in advance that they wouldn't work without a wiring adapter and cutting up of my wiring harness. I probably would have bought the lights anyway but more informed purchasers are happy purchasers and finding the lights you just purchased wont work without an adapter, well not good.The problem wasn't with the lights it was with Etrailer.
This product is the missing link of the trailer market. There is no equivalent.
Shipping to Canada was fast and hassle free.
I strongly recommend the product and the seller.
Great product! Easy to install and the built in reverse light makes backing up my car trailer MUCH easier at night! Color coded & labeled wires make connection a breeze.
I needed these lights next day and you delivered! The lights work grat and match the ones I have.
Absolute garbage I had a custom built trailer with custom wiring and a lot of time and effort was put in to make sure that these lights did not fail I used aluminum rivets with nylon spacers fully soldered connectors with adhesive heat shrink and the lights still failed. Unfortunately I have not reached out to to see if they have warranty. But, unfortunately the money spent already to build a separate housing for these lights will cost me in the long run due to the fact I can now only run the similar light. Very unfortunate they have not tested these lights thoroughly enough.. do not recommend. Especially for salt water.
Running strong. The original was broken off beyond repair. These lights last a long time, you can almost rule out the light during troubleshooting.
Hello Carol, I ordered September 17th, I was supposed to receive September 22nd.
I received everything on September 29. If you look at the path of the package before the package arrives at my house. All the places that we can visualize where our package has gone.
One of the rear lights has been changed, everything is correct.
I hope this can help you with future submissions.
Have a nice day.
Great customer service. Had a delay in product availability, but they communicated it and kept me up to speed the whole time. Will continue to order from them!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.