What Yakima HD Crossbars Will Fit My 2000 Toyota Tundra

Question

Question:

Im researching what size Yakima HD crossbars to get for my 2000 Toyota Tundra. My bed width measures 68 but the verify fit feature on your website says that I need 78 bars. I assume thats for overhang, but will the 68 bars for sure not fit or just not ideal?

asked by: Dan

0

Expert Reply:

I double checked the Yakima website. They also say you will need the 78" crossbars for your 2000 Toyota Tundra. I also checked Thule's ladder racks and their crossbar is 71" long. Keep in mind that the difference between the two setups is the Yakima crossbars will extend 3" further than the Thule crossbars on each side. I think the 68" crossbars come up just a bit short.

If you do not need a ladder rack, the Yakima BedRock HD Truck Bed Rack - Aluminum - 300 lbs - 78" Crossbars, part # Y01160-59, is a good option. It is a simple, no drill installation. It comes with Yakima's HD crossbars and it has a weight limit of 300 lbs.

I have included a product description link and a video review link below.

expert reply by: Mark Smith

0

Answer 1

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 2

The main difference when comparing Timbren and SumoSprings for suspension enhancement is going to be the weight capacities. Timbren uses hollow rubber springs that is able to support more weight but they can cause a firmer ride. The SumoSprings are…

view full answer...

Answer 3

You're correct, the Yakima OverHaul HD ladder racks like part #Y01151-58 only come with two locks. The towers lock into bases and these bases are what the locks attach to. The intention is that you would use one lock base on each set of towers to…

view full answer...

Answer 4

Hello Greg, thanks for reaching out. The lowest profile roof rack for your 2018 GMC Yukon Denali XL is the Thule WingBar Edge Roof Rack #TH37WG. This has crossbars that integrate into the towers instead of having the crossbars on top of the towers…

view full answer...

Answer 5

We sure do Dan. The Furrion Microwave Trim Kit item #FR85TF is exactly what you need for the Furrion Built-In RV Convection Microwave and Air Fryer item #FR63TF in black. The Furrion Microwave Trim Kit item #FR85TF is black and measures 24-3/16"…

view full answer...

Answer 6

Hey Michael! To add Yakima HD Crossbars like #Y01158 to the TrackTowers #Y52AV you need the HD Bar Adapter for Yakima Streamline Towers #Y03541. Are you adding crossbars to a camper shell?

view full answer...

Answer 7

Hey Zack, congrats on the new truck. I recommend the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks item #Y01151-5968. As you'll see in the pictures below, this ladder rack attaches directly to your Deck Rail System. It…

view full answer...

Answer 8

I suggest the Thule SnowPack Ski and Snowboard Carrier - 6 Skis or 4 Boards - Black, #TH7326B. This low-profile carrier transports up to 6 pairs of skis or 4 snowboards. Vertical spring system accommodates thick snowboards, and raisers protect your…

view full answer...

Answer 9

The Yakima OverHaul HD Adjustable Truck Rack #Y01151-5768 is not compatible with round Yakima bars and no adapter is offered to allow using them on this item. I confirmed this with my tech contact at Yakima. Yakima's older Outdoorsman truck racks…

view full answer...

Answer 10

Sometimes you can use accessories from other manufactures that will work, but the ones you were looking at #RR72XB are 8mm x 16.5mm so they will fit very snug. Here are the T-Slot dimensions so you can see exactly how much products are compatible.…

view full answer...

What Yakima HD Crossbars Will Fit My 2000 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching