Curt Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
(293 reviews)
Price: $220.79
In Stock
Curt Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
Item # C18030
Retail:$330.95
Our Price: $220.79
You Save: $110.16
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (293)
- Q & A (0)
- Photos
CURT Hitch Bike Racks - C18030
- Hanging Rack
- 4 Bikes
- Folding Rack
- Tilt-Away Rack
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- CURT
- Class 2
This 4-bike rack is perfect for the occasional rider who wants to hit the trail with family or friends. Anti-sway cradles secure your bikes by the top tube and seat post. Tilts with bikes unloaded.
Features:
- Hanging bike rack carries 4 bikes using your vehicle's hitch receiver
- Anti-sway cradles secure bikes by the top tube and seat post
- Reduce bike-to-bike contact and help prevent scratches and scuffs
- Tethered pull pins allow rack to tilt and arms to fold
- Mast tilts down without bikes loaded to access cargo area
- Anti-rattle hitch pin reduces movement of rack in hitch receiver
- Removable sleeve lets you convert rack for use with 1-1/4" hitches
- Included support strap required for use with 1-1/4" receiver tubes
- Cable lock and hitch lock (sold separately) deter theft of your bikes and the rack
- Welded rung on back of mast provides anchor point for cable lock
- Frame adapter bar (sold separately) required for bikes without a straight, horizontal top tube
- Black powder coated steel is rust resistant
Specs:
- Application: 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitch receivers
- Carrying capacity: 4 bicycles
- Weight capacity: 45 lbs per bike
- Distance from center of hitch pin hole to closest edge of carrier: 7-3/4"
- Distance between arms (outside cradle to outside cradle): 16"
- Cradle width: 2"
- Carrier weight: 40 lbs
- 1-Year limited warranty
Note: Using this rack with a 1-1/4" hitch requires the use of the included support strap. Failure to use the support strap will void the rack's warranty.
Dual Folding Arms with Anti-Sway Cradles
This Curt rack has dual arms that provide excellent support for your bikes. They slope up to provide ground clearance for steep driveways and bumpy roads.
To fold the arms down, remove the tethered pull pin at the top of the mast. This leaves a smaller footprint, so you can keep the rack on your vehicle to park in your garage. And when stored in this configuration, it doesn't take up as much space in your garage.
Anti-sway cradles with rubber straps hold your bikes firmly in place. Each set of cradles has two straps that secure your bike along the top tube and one that secures the seat post or downtube. This multi-point contact helps keep your bikes from rocking back and forth, reducing bike-to-bike contact. The soft rubber cradles rotate around the rack's arms to accommodate bikes of different styles and shapes. They also have raised ridges that prevent your brake and shifter cables from getting pinched.
Tilts for Cargo Area Access
The rack tilts down without your bikes loaded. This means you won't have to remove the whole rack to access your cargo area for grocery runs and other errands.
To tilt the rack, remove the tethered pull pin at the base of the rack and lower the mast. When you're ready to go, raise the mast back up and re-insert the pin.
Threaded Hitch Pin and Hitch Adapter
A threaded hitch pin is included to help eliminate rattle in the hitch receiver during transport. To tighten the pin in your hitch, use the included 3/4" wrench, or a 3/4" socket wrench (sold separately). A clip is also included to keep the pin in place.
You can install the rack in a 1-1/4" hitch or in a 2" hitch. To use it in a 1-1/4" hitch, simply remove the adapter with the included Allen key.
Bike Rack Support Strap
The included support strap anchors the rack to your vehicle. It reduces unwanted movement of the rack while you drive and helps take the load off your hitch. It's required for use with 1-1/4" (Class II only) hitches and recommended for 2" (Class III) hitches. The strap wraps around the top of the mast and hooks into the seam of your vehicle's trunk or rear window.
Welded Rung and Available Accessories
The welded rung on the back of the upright mast provides an anchor point for a cable lock (sold separately) to help deter theft of your bikes.
A hitch lock (sold separately) is also available to secure the rack to your vehicle.
If you have a women's bike, kid's bike, or any other bike without a straight, horizontal top tube, you will need an adapter bar (sold separately) to properly mount your bike. The bar fits between the seat post and handlebar stem post of your bike to create a top tube so your bike hangs level on the rack.
18030 Curt Standard Hanging Style Hitch Mounted Bike Carrier - 2 or 4 Bikes - 1.25 and 2 Inch Hitches
Installation Details
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Product did not meet expectations
- Arrived Damaged
- Wrong item was ordered
Customer Reviews
Curt Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting - C18030
Average Customer Rating: 4.4 out of 5 stars (293 Customer Reviews)
This 4-bike rack is perfect for the occasional rider who wants to hit the trail with family or friends. Anti-sway cradles secure your bikes by the top tube and seat post. Tilts with bikes unloaded.by: Big B10/21/2021
Nice bike rack ! Saddles are well made and none of the ears that hold the straps in place have broken like they have with other brands I've owned.
It came with 1 strap for each saddle and the straps seem just a tad stretchy. I looked on line and found that Home Depot has a good price for the straps so I now have 2 straps on each saddle.
I've got it on a 1&1/4 hitch, but it came with an adapter for a 2 inch.
It holds 3 road bikes. I used it all the time.
by: Jennifer 04/12/2024
We are very happy with the Curt Bike Rack. It fits our 2 fat tire bikes and our tandem bike to the back of our motorhome with no problems.
by: Steven07/23/2020
Received the bike rack in about 3 days! Assembled and had it on the car in less than 30 min. Very sturdy and I love that it came with the 2inch adapter. Our last bike rack did not fold down. This one does. Great feature so I don’t have to remove it
by: Miriam06/22/2020
Everything about the hitch itself is as-advertised. Installation was straightforward, and the end result looks great on the back of the car (2015 Passat). It is tucked in and not intrusive. The 4-bike rack, based on our bikes, does not really hold 4 bikes at a time. It has straps for 4 bikes, and they adjust, but with adult size bikes, it unfortunately is not enough room. I could imagine them working if a couple of the bikes were small child size, but our youngest is now over 5 feet tall, so we are all on adult size bikes. Also the bike rack when installed drags the pavement backing out of our driveway, which is not steep, even when not loaded with the bikes. The bottom of the bike rack should angle up from where it inserts into the hitch more steeply, instead of coming out square from the hitch as far as it needs to to clear the bumper. The rack does seem to hold 3 bikes securely, though, and it tips out of the way while installed on the car to allow for trunk access, so while not perfect, is reasonably useable.
Miriam
6/23/2021
I believe that if the bike rack curved up from where it attaches to the hitch, it would solve the problem of scraping on drivewayssloped entrances. The hitch by itself never hits anything, only the rack. Even with the occasional scrape, though, the rack is holding up well after a year.
by: William12/13/2020
Order the curt 4 bike hitch rack and have not tried it yet. The ordering process was simple and I also used the toll to determine which hitch and rack capacity’s would fit my vehicle. Outstanding! Once ordered, I was told who picked and shipped the product and tracking information motion was provided. The shipping was fast and free. I would highly recommended etrailer for your towing and carrying needs.Their customer service, knowledge, shipping and price are the Best. Highly recommended!
William
12/25/2021
I would surely buy this again after using for a year! Great product.
by: Alyssa 07/31/2020
I have a Buick Encore 2020. I wanted a 4 bike rack. I read all the reviews on this site and others. The bike rack was easy to put together - my 15 year old and I did it. Did take some time but we managed it. It is heavy so an extra person that can lift is helpful. A Buick only allows for 1 1/4 hitch. So true to what others wrote the bike rack does sway when the bikes are on. This is a bit nerve racking. We took several test drives to try it out. Speed bumps are killer. It looks like the bike rack is going to heave the bikes over the front end of the car. If you can stomach this then you are okay. We don't plan to go off road or up hills. We just want to be able to take surface and freeways to some nice bike rides.
by: Kelly06/15/2020
The bike rack can accommodate 4 full bikes. We use this for BMX bikes so I am not sure if larger bikes would fit. With 4 bmx, it is maxed out. It is very sturdy and fits on my chevy cruze nice. I am still able to open the trunk when bikes are on the rack.
The down side is that the rubber securements do not last long. With in a month of usage several times a week the rubber tore on a few. I contacted the mfg directly and they sent me a dozen out without argument - great customer service. I keep them in my trunk so if one gets worn I can replace it on the fly. All in all, good product. I would purchase it again. 4 stars, just because of the strap issue.
by: Joanna06/21/2020
Our first adventure with this or any bike rack was across the country. There was some side to side swaying, but the bikes arrived safely. They did get a little scratched when one of the holders moved, but we were able to readjust it and it hasn't moved since. For the trip back we bought a "stabilizer" piece to help and the bikes did not sway as much. The way back caused less anxiety for us. Around town I do not use the extra piece.
by: John07/27/2021
Poor design. Huge wedge shaped bicycle supports make it almost impossible to mount a bike to the rack. If you can get the bike to mount, when removing the wedge support will grab the brake cable and give it a good twang. Bought a replacement unit.
by: Tim 05/05/2020
I didn't know to pay attention to the 1 1/4" vs 2" hitch adapters. A 2" hitch would be much more stable. Needed to buy an additional tie down strap for side stability. Overall good product; weak point is the 2" hitch necked down to 1 1/4".
Tim Z.
5/6/2021
Its been a year now, and the bike hauler is working out well. We have taken it on some longer 100+ mile trips, and it is good with the second tie down strap for lateral stability.
by: Mark P06/14/2017
Assembly was good. Directions were a little sparse and need work but got it together. Good fit on receiver hitch and is sturdy. One pin is very tight but should wear in. Have not put bikes on it yet but pleased so far.
Mark P.
6/14/2018
I have been using the rack for over a year now and it works great. It is getting ready to go to the beach again and has been on many trips around town as well.
by: Mike 08/26/2021
I havent used it yet. But I will definitely buy from eTrailer.com again! Great Customer Service. I like getting the emails from 'George' and 'Carol'
Mike
8/27/2022
I now use this rack at least two times a week. I keep it in the back of my SUV and installremove so that it wont get stolen. Thanks Seattle. I am using it in a 2in receiver, so it is not tight. This could be fixed, but I remove and install it fairly often. So thats fine.
by: Juli10/07/2021
MADE IN CHINA!!!! I researched for days to find a bike rack not made in China. Curt advertised their products were made in USA! False advertising! China has destroyed our economy and lifestyle...NO ONE should sell products from China in this country! I'm beyond livid!!
Sierra K.
10/15/2021
I understand your frustration. Some Curt products are USA made but their bike racks are not. This 4 bike rack is our most affordable one that is indeed made in the USA if you are still looking for one: Item # TH934XTR.
Helpful Links
by: Jeffrey10/31/2017
For the price I thought it might be a little rickety but it is sufficiently sturdy and works like a champ. Easy on/easy off. Fits snug in the hitch and the clamping screw makes it nice and tight. The straps are similarly snug and heavy duty. I have only used it with 2 bikes. I've never put the 4 bike extensions on. That seems like it might be quite a bit of stress for it, but if they were light-weight bikes it would probably handle it.
by: Gary Mangan02/20/2019
The bike was exactly what I wanted and expected. Beats the heck out of paying three times as much for a big named rack.
Gary M.
2/21/2020
Definitely heavy duty and exactly what I needed to carry 4 bikes.
by: Justin M.06/04/2018
The shipment came to us quickly. I found that assembling the product was fairly easy (using a few of my own tools) and the components were shipped in good condition We just used our rack for the first time this weekend on a long interstate trip to a metro area, for a long weekend. Weather dictated that our bikes ended up staying on the rack arms most of the time, through all kinds of road travel and rainy conditions; it held up well while doing a pretty fair job of protecting the bicycles. There was a little "bounce play" of the bikes with each other while traveling at high speeds, but the overall performance of the rack was pretty good for a product at this price-point. I would recommend it to others.
by: Evelyn08/09/2018
The bike rack is quite wobbly when the car is driving . The straps that come with it do not adequately hold the bikes on the rack. They need to be secured with other methods to keep them on the rack. The rack is also very heavy, so you would think it wouldn’t be so wobbly, but it is.
by: Blake11/09/2020
Very easy to put together and is very sturdy. This item was missing a couple bolts in the install package, Curt Trailer manufacturer error and not etrailer.com, and I called etrailer and they shipped me the missing bolts within a couple days without any hassle. This is the kind of service you want when there is an issue with an order. Highly recommend etrailer.com.
by: Keith07/30/2020
More expensive then the class 3 hitch,heaver then the hitch.The bushing that convertes the hitch from class 2 to 3 is very chessey,wobbly like you'd never bealve an will not except a regular hitch pin. You can't use a locking pin!
by: David02/09/2019
Works great. Only problem I found was some of the smaller adult bikes have trouble fitting on the bars. Sorry I didn't get a rack with the bars closer together. Having said that, they do make an adapter for kids bikes that i may spring for.
by: John 07/07/2020
very happy with the bike rack. used it last summer several times. went to door county with 4 bikes and had no problems. now looking for a kayak carrier
by: Ronald 11/27/2019
This rack arrived in good condition and assembled easily. I have traveled over 300 miles with four bikes on Interstate and back roads and the bikes never moved an inch. I have the 2” mount and it is very reliable. The tie-down straps are very easy to apply and remove. I highly recommend this product.
by: Thao07/09/2021
We have had the curt 4 bike rack for a year and it works well. It fits our Honda Pilot 2016 and is easy to install/uninstall.
by: Tom Osinska12/20/2020
First time buyer and the service over the phone with Korren was exceptional. I told her when I needed the items and I paid a little more but the items were on my door step exactly when she promised. The first item that I ordered was not in stock and I received a email telling me that. I called and Korren answered explained what was available, she asked if there was anything else that I needed and I explained to her that I was looking for a hitch pin and she told me that the one that was available already had one with it. The experience dealing with Korren and your company was awesome. I will definitely be recommending you folks to anyone. Thank you. I also don’t normally do these reviews but I had to with you guys. Thanks again.
by: Caleb07/17/2020
The rack is 13 inches wide I have a med hybrid bike and my wife has a small hybrid on mine it took me at least e mins and a bunch of maneuvering just to get mine past the brackets to get it on my wife's wont even slide on the bracket. the brackets are triangular shaped and probably a good 3-4 inches in diameter so add that to the 13 inch wide arms you have about 15 inches or so to get past
25
293
Show More Reviews
See what our Experts say about this CURT Hitch Bike Racks
- Will Cargo Carrier Work for 4 BikesA cargo carrier such as the Curt Cargo Carrier for 2" Hitches # C18113 is not designed for bikes, and there would be no way to stabilize them on the carrier, so it would not work as a way to transport them. For that you are going to need a 4-bike rack. The most economical 4-bike rack is the Curt 4-Bike Rack # C18030. This will do a fine job of getting your bikes from point A to point B on occasion. This is a hanging bike rack so for children's bikes or alternative-frame (step-through...
view full answer... - Replacement Support Strap and Rubber Cradle Straps for Curt 4 Bike RackWe carry both of those parts for your Curt 4 Bike Rack # C18030. The support strap is part # 18050 and the rubber hold down straps are part # C18007. The support strap comes in a quantity of 1 while the rubber straps come in a quantity of 2.
view full answer... - How to Carry Women's Bike on Curt Hanging 4 Bike Rack C18030To carry a women's bike on the Curt 4 bike part # C18030 you'll need a bike frame adapter bar part # UB01 which attaches to the seat post and steering stem of the bike to give you a flat bar for the rack to attach to. See attached pic and review video as well.
view full answer...
- Lock Options for Use with Curt 4-Bike Tilting Hitch Rack C18030We offer Curt Adjustable 6-Foot Cable Lock # C23666 for use with your hitch bike rack # C18030 but really any cable lock will serve to secure your bikes to the rack and even secure the rack to your hitch. The cable lock # e98891, which is 10-feet, should provide enough length to allow you to route it through each of the bikes, and also through the small ring on the upright tube. You can then secure the rack and bikes to the hitch with the one cable lock. If you prefer you can certainly...
view full answer... - Are There Any Replacement Cradles To Fit A 2 Diameter Bar For A Step Through E-BikeFor your situation, you would need to purchase a new bike rack as we do not sell cradles that are 2" in diameter as described. So, to carry your e-bikes weighing in just under 50lbs, I recommend the Thule T2 Pro XTR Bike Rack for 4 Bikes - 2" Hitches - Wheel Mount # TH69TX. This has a maximum weight capacity of 160lbs, and a single bike weight capacity of 60lbs. To safely carry your step through style e-bike; you'll need an adapter like the Swagman Bike Frame Adapter Bar for Electric,...
view full answer... - Compatible Trailer Frame Widths for Using Stromberg Carlson Bike Bunk # CC-275Thank you for providing a photo of the A-frame on your 2016 Riverside trailer. You will be fine using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 since it will work on A-frame trailers from 14- to 55-inches wide, as measured from the frame's outside edge to outside edge. This bike rack carrier works with 2-inch hitch-mount carriers like the Curt # C18030 4-bike rack, which is rated for 180 pounds of bikes.
view full answer...
- Inexpensive 1-1/4 inch Bike Rack Recommendation for Carrying 3-4 BikesAs long as the hitch on your vehicle is a Class II hitch the Curt Bike Rack part # C18030 would be a great option. This rack can carry up to 4 bikes and has a great price point. I attached a review video for this rack for you to check out as well. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal top tube on your...
view full answer... - Trailer Hitch and Bike Rack Recommendations for a 2019 Honda FitThank you for all of the info! The Curt Trailer Hitch Receiver # C11406 is a great choice for a trailer hitch and it fits all US models of the 2019 Honda Fit so if the exhaust on your import is the same as the US you should have absolutely no issues with fitment. When it comes to the Curt 4 Bike Rack # C18030 we will need to look for something different though because Curt lists this bike rack as fitting a 1-1/4" hitch but it needs to be at least a Class II and the Curt you're going with...
view full answer...
- Comparison of Hollywood Racks and Curt Hanging 4-Bike Hitch Mounted Bike RacksThe Hollywood Racks # HR8500 and the Curt # C18030 have a number of similarities. They're both 4-bike hanging racks that will carry up to 35 pound bikes. They both also have the option to fit into a 1-1/4 inch Class II hitch receiver. The arms on the Hollywood Racks are 2 inches closer together which can make it easier to load and unload bikes onto it. On both racks I took a measurement from the underside of the tube that inserts into the hitch receiver to the level where the bikes...
view full answer...
- Recommended Locking Hitch Pin For Curt C18087 Platform Bike Rack I have a solution for you, but the etrailer # e99047 is not a confirmed fit on the Curt bike racks. Instead, we have confirmed that the The SportRack Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers - 1-1/4" and 2" Hitches # SR0901 is a confirmed fit for Curt racks, specifically the # C18087 and # C18030
view full answer... - Will the Silent Act Hitch Pin # SHP2082 Fit My Curt 4 Bike Rack? While the Silent Act Anti-Rattle Hitch Pin # SHP2082 will not work with the Curt 4 Bike Rack # C18030 while mounted on the etrailer Hitch Receiver # E98908, we do have an option that will work for you. For that route, I recommend the Anti-Rattle Hitch Lock # SR0901. We have tested this hitch pin specifically on the Curt 4, and it will work great with your hitch.
view full answer... - 4 Bike Rack That works with both a 2011 Ford G-150 and 2007 Chevy TahoeYes, the Curt # C18030 will fit both your 2011 Ford F-150 and 2007 Chevy Tahoe, as long as both of these vehicles have hitches installed on them. This bike rack is compatible with both 1-1/4 inch and 2 inch hitches, most likely you will have 2 inch hitches installed on the vehicles that you specified. This bike rack is very affordable, and has the carrying capacity of up to 180 total pounds. It also has a nice tilting feature that can be used without bikes installed on so that you can...
view full answer... - Where Is The Curt 4 Bike Rack ManufacturedThe Curt 4 Bike Rack for 1-1/4" and 2" Hitches # C18030 you were looking at is made in the USA with the exception of some of the hardware is imported from other countries. The Curt # C18030 is a great option since it works with 1-1/4" or 2" trailer hitch receivers, and has a weight capacity of 45lbs per bike. The rack also features anti sway cradles to prevent your bikes from moving around when on the road, and the tilting function allows you to access the rear cargo area of your vehicle...
view full answer... - Hitch for 2017 Toyota Prius Prime that Can Carry 4 Bike Curt Bike Rack C18030For your 2017 Toyota Prius Prime there's only one hitch available that would be able to handle a 4 bike rack like the Curt # C18030 that you referenced and it's the EcoHitch part # 306-X7369 since it's a 2 inch hitch. The other hitches are Class I 1-1/4 inch which are limited to 2 bike racks max. This EcoHitch has a lower hitch opening that can be removed when not in use to give you a totally invisible look when not needed as well.
view full answer... - Will Hollywood Racks Over-The-Top Trunk Mount Bike Rack Fit a 2009 BMW X3I checked with Hollywood Racks, Yakima, and Thule and none of them have a trunk mount bike rack that will work with your 2009 BMW X3 but there are other ways to carry bikes on the vehicle including a trailer hitch mount and roof rack. Using a hitch mount is the way I recommend because it will cost less, it is easier to load and unload bikes, and a hitch affords you other accessory options such as a cargo carrier as well as the ability to tow a trailer should the need arise. For a trailer...
view full answer... - Is the 2 Inch Adapter Sleeve with Curt Bike Rack C18030 Plastic or MetalThe 1-1/4 inch part of the shank on Curt bike rack # C18030 is steel. The sleeve to adapt the rack to fit a 2 inch hitch is plastic. The other option would be to use a steel reducer sleeve in a 2 inch hitch, # HT02, and then not use the plastic adapter.
view full answer... - Will Curt Bike Rack Fit a Class III Trailer Hitch on a 2015 Toyota RAV4Yes! Curt 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting Item # C18030 will fit the Class III, 2 inch trailer hitch on your 2015 Toyota RAV4. I have included a link to a video review of this rack on a similar vehicle. If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. I...
view full answer... - Threaded Hitch Pin And Lock Confirmed To Fit Curt Bike RackWe have tested the Sportrack Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers - 1-1/4" and 2" Hitches # SR0901 and confirmed the fit with the Curt 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting # C18030. This threaded hitch pin and lock will work great with your Curt Bike Rack.
view full answer... - Replacement Adapter Sleeve for Curt 4 Bike Rack Part # C18030I do have an option for you but Curt does not offer the adapter sleeve on the Curt 4 Bike Rack part # C18030 separately. Instead, you could just use something like the Hitch Adapter Sleeve part # HRREDADA as the design is pretty much standard. You might need to drill into the adapter to line up with the set screws on the shank of the bike rack but they are not required.
view full answer... - Bike Rack Recommendation for a 2012 Honda Pilot that Will Also be Towing a TrailerThere are trunk mount bike racks that will fit the 2012 Honda Pilot, see link, but the Thule racks will not fit. There are ways to tow a trailer and use a hitch mount rack together, though. You can use dual-purpose ball mount # D210. The overall tongue weight of everything loaded on this ball mount is 750 pounds. The receiver portion has a tongue weight capacity of 350 pounds. So the weight of the bikes, bike rack, and the trailers tongue weight cannot exceed 750 pounds. Using this method...
view full answer... - Rack for 4 Bikes With Fat Tires on MotorhomeI have attached a link that is filtered to show motorhome bike bicycle racks. From this point I furthered filtered to 4-bike racks. That leaves 3 platform racks that won't fit your 4” tires. That leaves 4 “hanging racks.” They have a max capacity of 35 pounds per bike, but the Curt # C18030 rack has a maximum capacity of 180 pounds total. I like the curt as it is of the most sturdy construction with the highest cargo capacity. If you can make that work for you – it is the best choice....
view full answer... - Invisible Hitch for 2014 Subaru Impreza that Can be Used with Curt 4 Bike RackThe EcoHitch part # 306-X7211 that you referenced is a confirmed fit for your 2014 Subaru Impreza Sport hatchback and is hidden like you are wanting since it's only visible when the rear knockout panel is removed. This also can be used with the Curt 4 bike rack part # C18030 that you mentioned as well. 4 bike racks are great options for 2-3 bikes as there's extra room on the arms of the rack which just makes loading and unloading easier. If you plan on carrying any womens or alternative...
view full answer... - Will Curt Bike Rack C18030 Fit on 2007 Toyota RAV4You would have to measure from your hitch pin hole out to the furthest point out on the rear spare of your 2007 Toyota RAV4 to determine if the # C18030 will clear it. The rack has a distance of 7-3/4 inches from the pin hole to nearest portion of the mast. If the distance you measured is less than that this rack will fit. When we installed the Curt hitch part # C13149 on a 2007 RAV4 the measured distance was 6 inches so there is a very good chance the rack would work for you.
view full answer... - Can the Curt 4 Bike Rack 18030 be Used on a 2013 Toyota Prius VI do have options for you but the Curt 4 Bike Rack part # C18030 is not class I rated so even if you were to only carry two bikes I could not recommend you use this on the Curt Trailer Hitch Receiver part # C11276 for your 2013 Toyota Prius V. In order to use this bike rack you would need to install the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7192 which would also allow you to carry the maximum number of bikes for this bike rack so long as the weight of the bike rack and these...
view full answer...
Do you have a question about this Hitch Bike Rack?
Info for this part was:
Video by:
Andrew K
Video by:
Joshua S
Video by:
Jonathan Y
Video by:
John S
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Chelsea B
Test Fit:
Hayden R
Test Fit:
Savanna B
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Evangeline M
Updated by:
Wilson B
Updated by:
Matthew S
Updated by:
Daron K
Updated by:
Amanda M
Updated by:
Isabelle B
Updated by:
Bethann B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Big B.
10/24/2022
still holding up very well. None of the saddle ears of broken. I did have a problem with the saddles slipping back on the arms so I bought some radiator clamps and locked them in place.