See what our Experts say about this Roadmaster Accessories and Parts

• High-Low Adapter Needed for Flat Towing a 2008 Jeep Wrangler Sahara
  Since you can use different brand high-low adapters with any tow bar we actually have flat towing high-low adapters that will work for your situation. Unfortunately none of our dual adapters have the weight capacity to accomplish this. Attached is a link to our selection of high-low adapters that you can filter through. These range from a 2" rise/drop # RM-072-2 all the way to a 10-1/4" rise/drop # RM-048-10. If you're looking for an option with about a 7" drop like what the Malone # RM-048-10...
  view full answer...
• What do I Need to flat Tow a 2011 to 2013 Jeep Grand Cherokee Behind a Motorhome
  To flat tow a 2011 to 2013 Jeep Grand Cherokee there are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. The base plates are what attach to the front of the Jeep and provide a safe and proper attachment point for the tow bar. For the 2011 to 2013 Grand Cherokee I recommend Roadmaster EZ5 base plates # RM-521440-5. These base plates feature removable arms that, when removed, makes the base plates almost invisible. I have linked a video...
  view full answer...
• Is There a Longer Threaded Hitch Pin For the Kuat Hi-Lo Hitch Extender?
  Hey Eric. Sorry but there is no other hitch pin that is compatible with the threads on the Kuat Hi-Lo Hitch Extender - 2" Hitches - 7" or 10" Extension item # HL20B. We keep running into these issues with the Toyota receivers and the manufacturer's haven't been quick to update their thread hitch pins to work with the thicker metal around the receivers. The only solution I have for you is to replace it with the Roadmaster High-Low Adapter for Tow Bars item # RM-072-2. You can secure it...
  view full answer...
• Which Hitch and Bike Rack Should I Get To Carry E-Bikes On My 2014 Dodge Challenger?
  First let's get a hitch that will fit with your Borla exhaust but also have good ground clearance. The Curt Hitch Reciever Part # C13236 will give you 9-1/2" of ground clearance. Now, let's find a rack with the most ground clearance. The Inno Tire Hold 2 is going to be able to carry two electric bikes with a weight of 50lbs so you will be plenty good when it comes to weight capacity. This Rack has a rise in the shank so it sits higher than your hitch receiver when hauling. If you are still...
  view full answer...
  
• How To Raise Generator Carrier on the Back Of a Winnebago Travato
  I do have an option for you but none of the suspension enhancements we have for your 2019 Winnebago Travato 59K on a Ram ProMaster 3500 Chassis will lift the motorhome from stock height. The SuperSprings Custom Suspension Stabilizer and Sway Control Kit part # SSA11 which is what I recommend will prevent the motorhome from sagging therefore increasing clearance but again nothing we offer will raise the rear of the motorhome from stock. If you are carrying the generator on a hitch mounted...
  view full answer...
• High/Low Hitch Adapter to Keep Nighthawk Tow Bar RM-677 Level for Best Operation
  Roadmaster does specify the 3-inch safe zone for tow bar height differences at the motorhome and toad ends. Really any tow bar will perform better when it is level since there will be less arm tube friction. A level tow bar will also endure less mechanical stress and it will put less stress on the base plates, the towed vehicle's frame and its suspension. Since you have invested in the Nighthawk # RM-677, one of the best tow bars available, I recommend you protect your investment and...
  view full answer...
• Repair Kit to Fix AutowLock Button of Roadmaster Falcon Tow Bar
  Over time the AutowLock buttons of the Roadmaster Falcon 2 Tow Bar # RM-520 can wear out and need to be replaced. The good news is that we carry a repair kit for this to get it back to normal. For that you would need the part # RM-910003-60.
  view full answer...
  
• Which High/Low Adapter for Flat Towing Lifted Jeep
  You'll need a high/low adapter to bring the tow bar within 3 inches +/- of level. The adapter you need will depend on the height difference between the base plates and the receiver on the motorhome/tow vehicle. Roadmaster offers several different adapters: • For a 2 inch rise/drop, use # RM-072-2 • For a 4 inch rise/drop, use # RM-070 • For a 6 inch rise/drop, use # RM-048-6 • For a 8 inch rise/drop, use # RM-048-8 • For a 10-1/4 inch rise/drop, use # RM-048-10 I've linked to an article...
  view full answer...
• D-Ring Bumper Mounts for Poison Spyder Bumper on 2015 Jeep Wrangler Unlimited
  That's a cool Jeep and the correct adapter for your 2015 Jeep Wrangler Unlimited with a Poison Spyder front bumper are the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick # RM-035, which we know to be the correct size for this bumper. In regards to the angle of your Jeep's mounts being too high, what you will need is called a High-Low adapter. To choose the correct High-Low adapter you will need to start by measuring the height from the ground...
  view full answer...
  
• Will Hitch Extender # HE18 Allow Camper to be Towed with Tailgate Down
  The Roadmaster High-Low Hitch Adapter, part # RM-072-2, is intended for leveling a tow-bar when flat towing a vehicle behind a motor home. It cannot be used to tow a camper. You might be able to use part # HE18, which is a hitch extender. This item adds 18 inches to the length of the receiver but also cuts in half its tongue weight capacity. You will need to make sure that the combined weight load of what you intend to place in your vehicle plus the weight of your towed camper does not...
  view full answer...
  
• Hitch Pin and Lock Recommendations for Roadmaster High/Low Adapters
  The High/low adapter # RM-072-2 does not come with a hitch pin. It takes a 5/8 inch diameter pin or lock. For a regular pin and clip you can use # PC3. For a lock you can use # RM-316 which is a set of 2 that are keyed alike.
  view full answer...
• Hitch Adapter with 2 Inches of Drop to Get a Cargo Carrier to Clear Spare Tire on a Jeep
  You can use Roadmaster high/low adapter # RM-072-2 which offers a 2 inch drop. However, the use of this adapter (or any adapter) reduces the tongue weight capacity if the hitch by 50 percent. So for example if your hitch is rated for 350 pounds tongue weight it is reduced to 175 pounds when using an adapter. So the combined weight of your cargo carrier and the cargo cannot exceed the reduced capacity.
  view full answer...
• Is A Hitch Extension Available For A Class III Hitch With A 2 Inch Rise
  The Roadmaster High-Low Hitch Adapter, part # RM-072-2, is a hitch adapter that is used for tow bars only. It is not to be used with any type of trailer. It is used to level the tow bar with the vehicle being towed. This adapter fits a 2 inch receiver and will give a 2 inch rise or drop. The overall length of the hitch adapter is 14-3/4 inches and the measurement from hitch pin hole to hitch pin hole is 10-1/4 inches. I am including a link to the tow bar hitch adapters with a 2 inch rise. The...
  view full answer...
• Height of Roadmaster Cross-Bar Style Base Plate Kit on 2018 GMC Canyon
  With the Roadmaster Crossbar-Style Base Plate Kit # RM-523182-4 installed on your 2018 GMC Canyon the tow bar will be mounted 17-1/2 inches off the ground. Keep in mind this measurement is assuming your Canyon is equipped with the stock 265/60R18 size tires. Based on the 20 inch height you mentioned for the hitch on your RV you will technically still be in the "Safe Zone" (within 3 inches above or below level) without an adapter but to get even closer to level you will just need the Roadmaster...
  view full answer...
• Can High-Low Adapter be Used for Motorcycle Carrier
  Although you technically can use the Roadmaster High-Low Adapter # RM-072-2 to mount an accessory like a motorcycle carrier, the use of ANY adapter will reduce the tongue weight of the hitch on your vehicle by 50 percent. So if your hitch has a tongue weight capacity of 500 lbs the use of an adapter such as this would lower the capacity to 250 lbs and your bike and hauler would be too heavy. So essentially, unless you have a hitch with a tongue weight capacity of 800 lbs you would not...
  view full answer...
• Height Adjustment Range of Demco Excali-Bar III Tow Bar
  The Demco Excali-Bar III Non-Binding Tow Bar - Victory Series - RV Mount - 2" Hitch - 10,500 lbs # DM9511013 you referenced is an excellent tow bar and it has an integrated height adjustment in the shank. This will allow for 1-1/2 inches of rise or 1-1/2 inches of drop depending on the orientation of the shank. Most tow bars simply have a straight shank. When flat towing, you are correct that your tow bar needs to be within 3 inches of level for safe transport. Most tow bars will require...
  view full answer...
• Hitch Adapter to Raise Cargo Carrier by 3-4 Inches
  What you're describing is called a high-low adapter. They work very well keeping the tow bar level when you're flat towing a vehicle, but they can also be used for elevating a hitch mounted accessory. Another option would be the Roadmaster # RM-077-4 dual hitch receiver offers the rise you're looking for. The pin hole to pin hole dimension is 10-1/4 inches which is slightly longer that you wanted, but it should work just fine for you. A third alternative, the Curt # D-192 offers a bit...
  view full answer...
• Base Plate Recommendation For a 2015 Ford Focus SE Hatchback
  Good news, I can help you pick out the right base plate kit for your 2015 Ford Focus. Staying in the Roadmaster family since you have a Falcon # RM-520, the Roadmaster # RM-524443-5 and the Roadmaster # RM-524443-4 are both great fits for your 2015 Ford Focus SE Hatchback. Both will be compatible with your tow bar, just depends on how you would like the front of the vehicle to look after the install. The difference of the EZ4 and EZ5 is the mounting arms. The EZ5 has the arms that will...
  view full answer...
• How To Raise Motorhome Hitch 2" for Tow Bar
  Yes, the Roadmaster High-Low Adapter for Tow Bars part # RM-072-2 can be used to turn the 4" drop into a 2" drop if used in the rise position.
  view full answer...
• Base Plate Fit For Flat Towing 2011 Chevy Suburban 2500
  We do have base plates that are a fit for your 2011 Chevy Suburban 2500, though the part you mentioned is only a fit for the 1500 model. I'll list out the fits for you of all the parts you will need in order to flat tow your '11 Suburban 2500: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # 3115-3 - Tow Bar: Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 - Safety Chains: Roadmaster Safety Cables # RM-646 - Wiring Kit: Roadmaster Universal Hy-Power Diode...
  view full answer...
• Anti-Rattle Device Recommendation for Use with Roadmaster High-Low Adapter
  Since the Roadmaster High Low Adapter part # RM-072-2 that you referenced has a solid shank the type of anti-rattle device you would need is one like the # RM-061 which clamps around the shank and the opening of the hitch. I attached a review video for this for you to check out as well. You should also note that when you use a hitch adapter like the extender you referenced you end up cutting the tongue weight capacity of the hitch in half so you would need to be aware of that as well.
  view full answer...
• Can Lower Square Tube on Kuat Pivot be Used with Accessories
  The lower square tube on the Kuat Pivot # PVP20B is not designed or rated for use with any type of accessory. It also is not set up for it (no pin holes) so it is not a good option for your application. We do have adapter # RM-072-2 which has a 400 pound tongue weight capacity and 2 inch drop. However if you use it or anything similar it will reduce the tongue weight capacity of the trailer hitch by 50 percent.
  view full answer...
• Can Hitch Extender be Used with Kuat NV 2.0 to Clear Spare
  Extenders can be used with bike racks but you need to keep in mind that doing so cuts the capacity of the trailer hitch in half. The part # HE06 would fit your 2 inch hitch and provide 7 inches of additional extension. As long as your hitch is rated for the weight of Kuat NV 2.0 # NV22G and bikes this would be a feasible solution.
  view full answer...
• Hitch Adapter Needed with a 6 Inch Extension and a 2 Inch rise
  The Roadmaster Dual Hitch Adapter, part # RM-072-2, may be what you are looking for. It is designed for tow bar use only and is not to be used with any type of trailer. This adapter fits a 2 inch receiver and will give a 2 inch rise and drop. The overall length of the hitch adapter is 14-3/4 inches and the measurement from hitch pin hole to hitch pin hole is 6-3/4 inches, which is the amount of useable extension when installed in the receiver. You may also be interested in the Curt...
  view full answer...

Do you have a question about this Accessories and Part?