How To Raise Generator Carrier on the Back Of a Winnebago Travato

Question

Question:

I have 2019 Winnebago Travato 59 K that sits on a RAM 3500 platform. Id like to get a bit more lift on the tail end in order to get more clearance for the low hanging generator. What do you suggest?

asked by: Tony K

0

Expert Reply:

I do have an option for you but none of the suspension enhancements we have for your 2019 Winnebago Travato 59K on a Ram ProMaster 3500 Chassis will lift the motorhome from stock height. The SuperSprings Custom Suspension Stabilizer and Sway Control Kit part # SSA11 which is what I recommend will prevent the motorhome from sagging therefore increasing clearance but again nothing we offer will raise the rear of the motorhome from stock.

If you are carrying the generator on a hitch mounted carrier like the TorkLift Lock and Load part # TLA7752 then you can use an adapter like the Roadmaster High-Low Adapter part # RM-072-2 but keep in mind this will reduce your tongue weight capacity by 50%.

expert reply by: Conner L

0

Answer 1

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit part #SSA11 is an excellent option for a 2016 Pleasure Way Lexor TS on a Ram ProMaster 3500 Chassis. It will do a great job of helping to prevent rear end sag thereby increasing…

view full answer...

Answer 2

To begin troubleshooting this problem I recommend checking the connections on your T-One Vehicle Wiring Harness #118618. Often when one function is not working it is due to a set of connectors not seated together properly. Try disconnecting and…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 8

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 9

Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item #PB25RV. Lifting your truck by the frame will stretch the bags too far…

view full answer...

Answer 10

Hi Dennis! The Hellwig Load Pro 35 Heavy Duty Helper Springs with Custom Mounting Kit - Above Axle #HE93XR can potentially raise an unloaded truck a little, but it's going to be very minimal and will really only happen if your suspension is…

view full answer...

How To Raise Generator Carrier on the Back Of a Winnebago Travato

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching