1. Hitch Adapters
  2. Demco
  3. High-Low Adapter
  4. Fits 2 Inch Hitch
  5. 6 Inch Rise/Drop
Demco 6" Drop/Rise Receiver for Victory Series Tow Bars - 2" Hitches - 10,500 GTW, 100 TW

Demco 6" Drop/Rise Receiver for Victory Series Tow Bars - 2" Hitches - 10,500 GTW, 100 TW

Item # DM9523060
lowest price pledge
Retail:$228.00
Our Price: $185.67
You Save: $42.33
Hitch Adapters
This item qualifies for Free Shipping
Shipping Weight: 24 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Make up for the height difference between your RV and towed vehicle with this hitch adapter. Provides either a 6" drop or a 6" rise. Call 800-298-1624 to order Demco hitch adapters part number DM9523060 or order online at etrailer.com. Free expert support on all Demco products. Guaranteed Lowest Price and Fastest Shipping for Demco 6" Drop/Rise Receiver for Victory Series Tow Bars - 2" Hitches - 10,500 GTW, 100 TW. Hitch Adapters reviews from real customers.
  • All Info
  • Reviews (1)
  • Q & A (1)
  • Videos (1)
  • Photos
  • Why etrailer?

Demco Hitch Adapters - DM9523060

  • High-Low Adapter
  • Fits 2 Inch Hitch
  • Demco
  • 6 Inch Rise/Drop

Make up for the height difference between your RV and towed vehicle with this hitch adapter. Provides either a 6" drop or a 6" rise.


Features:

  • Allows for proper positioning of tow bar
    • Makes up for height difference between RV's hitch and towed vehicle's base plates
    • Also lets you mount a bike rack, cargo carrier, or other 2" hitch accessory
  • Provides either drop or rise for adequate ground clearance
  • Constructed of sturdy steel
  • Resists rust and corrosion with black powder coat finish
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Drop/rise: 6"
  • Gross towing weight: 10,500 lbs
  • Tongue weight: 100 lbs
  • Overall length: 17"
  • Distance from center of hitch pin hole to center of hitch pin hole: 12"


Dimensions


9523060 Demco 6" Drop/Rise Receiver for Victory Series Tow Bars





Video of Demco 6" Drop/Rise Receiver for Victory Series Tow Bars - 2" Hitches - 10,500 GTW, 100 TW

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Demco Tow Bar Parts - 6 Inch High Low Adapter - DM9523060

Ellen: Hey, everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the Demco six inch drop or rise receiver. This is going to be a high low adapter for connecting your RV to your towed vehicle. A lot of times one is going to be a little bit higher than the other. Either our towed vehicle is taller than our RV's hitch or vice versa.

Usually it's going to be actually that latter configuration, so whenever we're towing we want to make sure that everything is sitting nice and level, so that there's no added undue stress on our tow bar or base plate or our RV's hitch. So having an adapter going between them, it's going to alleviate those problems. Make sure that everything is towing straight in a straight line and we don't have any issues. This is going to give us that six inches of drop or rise.If you flip it over and this receivers on top, that would be the rise position. Right now it's in the drop position.

And so that's going to be a pretty good gap. If you don't know how to find the distance or the difference between your towed vehicle and your RV. Basically what you'll do, take a tape measure and go from the center of your RV's hitch to the ground. And then go to your base plate, the attachment point there, from the center of that attachment point to the ground. Subtract the two from each other.

If your hitch on your RV is taller than your towed vehicle, you'll need a drop. If it's the other way around, your towed vehicle is higher than your RV, you need a rise. And whatever that number differences is how much you'll need. So if you're the different difference between your RV and your towed vehicle was six inches, you're in the right place.This also has a pretty high weight rating. It has a gross towing weight rating of 10,500 pounds, so pretty good amount of weight that you can tow with this.

Some of your bigger SUVs, and things like that, will have a higher gross vehicle weight rating so this will work out well for them. It does have a tongue weight rating of only a hundred pounds, which I know doesn't sound like very much and it's not. That's because Demco really doesn't intend this for any other purpose. And as far as the tongue weight that you'll have on the receiver, if you're using it for a RV situation where you're towing a vehicle, you really don't have that much tongue weight. It's all straight line pull. So you shouldn't really need to have that higher tongue weight. Again, they don't really design this to have any kind of really heavy stuff, so if you're wanting to put a bike adapter in here and do some kind of crazy stuff, they are not cool with that. So that's why we have the a hundred pound tongue weight rating there.It is a nicely designed hitch. You can see all the nice solid welds going around our connection, between the solid shank up top and our hollow tube at the bottom, where our actual tow bar goes in place. I'll give you guys some measurements here. The overall length of our adapter, from the very front of our receiver to the very back of the shank, that's going to be 17 inches long. The distance from pinhole to pinhole is a foot, or 12 inches. Again, our drop or rise, which is from the center of the pin hole here to the center of the pin hole there, that is six inches apart. From the front of our receiver to the center of our pin hole is going to be two and a half inches. On the backside it's going to be the same thing. So about two and a half inches from the center of our pinhole to the very back of the shank.This does work in a two inch by two inch hitch. Same thing for this. It's going to be a two inch by two inch receiver. Something that I kind of like about this back piece, the shank back here, is that it does have these chamfered edges, so they just kind of knocked off the sharp corners of all the edges there. And that just helps it to slide easier into our hitch. We don't have to fight with it as much because it doesn't have that close tolerance around the edges that a lot of other ones do if it's just that straight block square shape. So by cutting out those corners just allows dirt and grime and rust and things that build up in our hitches over time to have a place to go. Still going to hold tightly in your hitch. It's not going to affect the overall performance of it. It just helps you to get things installed and also to take it out whenever you're not using it.So all in all, I think this is going to be a nice addition for your flat tow setup. Again, a flat tow setup requires a lot of different components, including your tow bar, your base plate, supplemental braking system, and your safety chains, and also your diode wiring or your, some kind of supplemental wiring for your vehicle. If you need any of those parts, we have a lot of options here at etrailer.com. Along with a lot of great information to help you choose the right options for your vehicle. So definitely check those out and thanks for watching. We'll see you next time.


Customer Reviews

Demco 6" Drop/Rise Receiver for Victory Series Tow Bars - 2" Hitches - 10,500 GTW, 100 TW - DM9523060

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Make up for the height difference between your RV and towed vehicle with this hitch adapter. Provides either a 6" drop or a 6" rise.

- DM9523060
by:

My new Demco riser arrived within 72 hours of ordering. Wow. Can't beat that. We had our Thor Palazzo loaded and ready to go on a trip as it arrived. I purchased this product to solve a mis-match between the coach receiver and our tow car, a 2013 CRV. Problem solved. Very happy with the quality of the welds, the powder coat finish and the heavy duty steel. Don't hesitate to buy this product. etrailer rocks.


1
1

Ask the Experts about this Demco Hitch Adapters

  • 4 inch High Low Adapter for Use with Commander 2 Tow Bar
    It would seem that the Demco High Low Adapter would work fine with your Commander but since they specifically said that it only fits the Victory Series tow bars since that's only tow bar that tested it for we have to recommend you follow that, but we can still help. We have the Blue Ox High Low Adapter part # BX88129 which provides 4 inches of rise/drop and can be used with basically any tow bar including your Commander 2.
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality hitch adapters for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch adapter information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Installed by:
Kathleen M
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.