Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 11" Extension

See what our Experts say about this Roadmaster Accessories and Parts

• Pin Hole to Pin Hole Dimension on RoadMaster High/Low Receiver
  The pin hole to pin hole distance of the # RM-048-4 is 9-5/8". The Blue Ox # BX88241 has a pin hole to pin hole length of 12 inches, but it also has a rise/drop of 7 inches. This will be crucial to picking out the right adapter for your RV, see attached Help Article. Two adapters that are similar to the Roadmaster one you were looking at are the Blue Ox # BX88235, with the length from center of pin hole to center of pin hole is 10-1/8" and the Roadmaster # RM-076 has a pin hole to pin...
  view full answer...
  
• Recommended Hitch Extender for Towing with a 2008 Range Rover
  Since hitch extenders like the 11" Roadmaster # RM-071 you show in your pictures reduces the weight rating of the hitch by 50% we typically recommend avoiding them as a solution. For your application we have ball mounts with extended shanks that don't reduce the weight capacity of your hitch and that's what I recommend going with. For a long ball mount we have the Brophy Ball Mount # BM20 which has a 3/4" rise/2" drop and measures 13-1/4" from the center of the hitch pin hole to center...
  view full answer...
  
• Why is Tongue Weight of Roadmaster Hitch Extender # RM-071 100 lbs
  The Roadmaster Hitch Extender part # RM-071 that you referenced is designed to be used only in flat towing situations where there wouldn't be hardly any tongue weight. This is due to the fact that the vehicle being towed has all 4 wheels on the ground unlike a trailer that only has one axle. It's not rated for trailer use, but it can be used when flat towing a vehicle up to 6,000 lbs. Even our most heavy duty hitch extenders like the Torklift Super Truss part # TLE1521 have lower capacities...
  view full answer...
• Recommended Anti-Wobble Trailer Hitch Lock For A Roadmaster # 071-75
  When installing The Roadmaster Hitch Extender for Tow Bars - 2 inch Hitches - 7-3/4 inch Extension # RM-071-75 I recommend The Anti-Rattle Trailer Hitch Receiver Lock for 2 inch Hitches - 3-1/2 inch Span # 63232. This lock fits a 2 inch hitch and has a pin diameter of 5/8 inches. This pin reduces play and vibration in the hitch connection. I attached a review video link below.
  view full answer...
• Availability of Hitch Extension To Keep Pickup From Hitting RV When Being Flat Towed
  The Roadmaster High-Low Hitch Adapter, part # RM-048-8, will extend the truck further away from the RV, but it will also change the height of your tow bar connection. It has a 8 inch rise or drop which will either raise or lower the tow bar connection of your pickup to the RV. If you have a level connection now you will not want to use the # RM-048-8 to extend your vehicle away from the RV. The end of the tow bar that attaches to the base plates on the vehicle should not exceed a rise...
  view full answer...
• Can the Roadmaster Dual Hitch Receiver Be Used For a Bike Rack and Cargo Carrier
  I do have an option for you but I cannot advise you combine two hitch adapters together like the Roadmaster Hitch Extender part # RM-071 and the Roadmaster Dual Hitch Receiver Adapter part # RM-077-4 as this would be very unsafe. However, if you need to carry both bikes and extra cargo I do still have an option for you. I recommend the Hollywood Racks Sport Rider SE2 Platform Bike Rack w/ Cargo Carrier part # HR1450Z-85.
  view full answer...
  
• Hitch Extender Recommendation for Use with the Roadmaster High-Low Hitch Adapter # RM-048-10
  I have a solution for you that will get you within 1 inch of the extension you need, but the # HE6000 would not be the correct extension to use. Instead, you would want the Roadmaster Trailer Hitch Extension # RM-071 to go with the Roadmaster High-Low Hitch Adapter # RM-048-10.
  view full answer...
• Using Hitch Extender on 2012 Jeep Wrangler so Cargo Carrier Clears Spare Tire
  The particular extender you referenced, part # RM-071 is designed for a rolling load, like flat towing a vehicle behind a motorhome. It is not intended for use with a hitch-mounted accessory like a cargo carrier. An extender like part # C45795 that offers 14 inches of extension would be a better choice. Using any hitch extender will lower the tongue weight capacity (the maximum amount of weight that can safely be suspended from the hitch) by 50 percent. All of the 2 inch receiver hitches...
  view full answer...
• Roadmaster Hitch Extension Availability for Roadmaster Flat Towing Setup
  That's going to depend on how much extension you'd need. From Roadmaster we have the part # RM-071 which is 11 inches or the part # RM-071-75 which is 7-3/4 inches long. If you needed something different let me know and I can see what we have that might work.
  view full answer...
• Hitch Extender Recommendation for Use with Tow Bar and AutoStop Braking System
  The Roadmaster hitch extender part # RM-071 is designed for flat towing applications and would work well for you to get an additional 11 inches from your tow bar setup so that you can make tighter turns. Let me know if you need something different though and with more info I can see what your best option would be.
  view full answer...
• Recommended Trailer Hitch Extender for Truck Bed Camper and Boat Trailer Combination
  The Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 11" Extension # RM-071 is the only extension we have to fit your combination as it stands. The only other option you have for that trailer weight is to get a Torklift hitch and a SuperTruss Extension that would be longer but also stronger. They are really well made, and will cost you some money, but would definitely be the best option for your application. If you let me know the year/make/model of truck, I'll be happy to further...
  view full answer...
  
• Recommended Trailer Hitch Extender for Class V Hitch
  Hitch extenders are not rated based on Class III, IV, or V. The use of a hitch extension in most cases will reduce the tongue weight of your hitch by 50%. There is not a 10 inch option, but there are many similar sizes that may work for your application. For instance, the Roadmaster Hitch Extender for Tow Bars--11 inches # RM-071 has a towing capacity of 6,000 lbs but only a tongue weight rating of 100 lbs. It is designed to be used for flat towing. The Curt Hitch Extender for 2"...
  view full answer...
• Why Does the Roadmaster Hitch Extender Part # RM-071 Only Have a 100 Lb Tongue Weight Capacity
  The Roadmaster Hitch Extender part # RM-071 is designed specifically for flat towing. A toad vehicle will not have much of a tongue weigh at all which is why this adapter is only rated for 100 lbs tongue weight (TW) and 6,000 lbs gross trailer weight (GTW). I have attached a review video on the extender for you as well.
  view full answer...
• Weight Capacity of the Roadmaster Trailer Hitch Extension RM-071
  The Roadmaster Hitch Extender part # RM-071 has a 6,000 lb total towing capacity and a 200 lb tongue weight capacity.
  view full answer...
• Multipurpose Ball Mount with 2 Receiver for Cargo Carrier
  You can use your cargo carrier and tow a trailer with your Sea-Doos by using the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210. The ball mount will require a hitch ball with a 1" shank, so if you do not already use one you need either # C40002 for a 1-7/8" hitch ball or # 63845 for a 2" hitch ball. If you do not have a pin and clip to secure your ball mount you will need part # PC3.
  view full answer...
  
• Recommendation For Hitch Extender or Longer Ball Mount To Tow Trailer With Dodge Ram 3500
  I would recommend to use a longer ball mount instead of a hitch extender. When using a hitch extender the tongue weight capacity is reduced by 50 percent, so a hitch that has a 600-lb tongue weight capacity will be reduced to 300 lbs. If you have a 2 inch hitch on your Dodge 3500 truck and use a longer ball mount like the Brophy Ball Mount, part # BJ20, it will not reduce the tongue weight capacity and it measures 13-1/4 inches from the center of hitch pin hole to center of hitch ball...
  view full answer...
• Can I Use A Ball Mount Extension With A Flat Tow Setup
  In order to extend your ball mount out 8-10" from the hitch receiver, you will want the Roadmaster Hitch Extender for Tow Bars part # RM-071. The hitch is rated for use with a max gross trailer weight of 6,000 lbs and a max tongue weight rating of 100 lbs which is more than enough to flat tow your Jeep. To secure the hitch extension to your hitch, you may want to consider the Trailer Hitch Receiver Lock part # e98882. I have attached a product review of both items for your viewing.
  view full answer...
• Could I Use a Hitch Extender For Additional Clearance When Towing My Trailer
  This Roadmaster Trailer Hitch Extension # RM-071 would not be the correct hitch extension for you. You might be able to use an 8 Inch Hitch Extender for 2 inch hitches # e88YR. However, you should note that if you use a hitch extender you essentially cut the towing capacities of the hitch in half. The # RM-071 that you referenced is designed for flat-towing purposes only. I attached an FAQ article on hitch extenders for you to check out also.
  view full answer...

Do you have a question about this Accessories and Part?