Derale Radiator Adapter Fittings for Ford and Lincoln

See what our Experts say about this Derale Accessories and Parts

• Transmission Cooler Options for a 1996 Ford F-250 with 7.3 Liter Diesel Engine
  We currently have 6 transmission coolers that are recommended for your 1996 Ford F-250 with 7.3 liter diesel engine. I have included a link to them below. Even though the Derale Hyper-Cool Remote Transmission Cooler Kit with Fan, -6 AN Inlets - Class V, # D13960, is not on that list, transmission coolers are not technically vehicle specific, so you could install it on your truck with the proper sized fittings. The D13960 comes with -6 AN x 3/8 inch hose barb adapter and one of the recommended...
  view full answer...
• What Transmission Cooler Fitting Will Fit On 2002 Ford F150 With 4.2 Liter V6
  The transmission cooler fittings you have referenced, # D13018, are not the correct part for your 2002 Ford F150 with 4.2L V6. For the 2002 Ford F150 with 4.2 L V6, it depends on what size transmission line fittings you have. If you have 5/8 inches-18 transmission line fittings you would use the Transmission Cooler Fitting, # D13025. If you have the 1/2 inches-20 transmission line fittings you would use Transmission Cooler Fitting, # D13024.
  view full answer...
• Transmission and Oil Cooler, Rear Helper Springs, and Towing Mirrors for a 2001 Ford E-350
  I have some excellent recommendations that will not only help your 2001 Ford E-350 van last a long time but will also keep you under budget. First, instead of just a transmission cooler, I recommend a combination engine oil and transmission fluid cooler # D15902. This will help both the transmission and engine run cooler which will in turn help get the longest life out of them. I have linked a video showing an example installation for you. For the transmission cooler part of this combination...
  view full answer...
• Transmission Cooler Recommendation for 2004 Ford F-150 Towing in Mountains
  Do you mean 4 wheel low 1 or low 2 gearing for your truck? You should keep the truck in 2 wheel drive when towing if you are on dry pavement. Putting the vehicle into 4 wheel drive will cause damage if you are on dry pavement. It would be a really smart idea to install a transmission cooler on your truck if you haven't installed one already. For that I recommend the Derale part # D13503 which is larger and very efficient. You'll also want the fittings part # D13024 and # D13025 to make...
  view full answer...
• Transmission Cooler Recommendation for 1999 Ford F-150 with 5.4 liter V8
  For towing a trailer like what you mentioned with a 1999 Ford F-150 a supplemental transmission cooler would be a great option that we would highly recommend. Most likely your truck came with a factory cooler but typically they do not do a very good job at all. Especially around the age of your truck. The newer vehicles have better coolers but the older ones are adequate at best for light duty applications. I'd recommend the part # D13503 as this is a very popular and efficient cooler...
  view full answer...
• Parts Needed to Install Derale Electra-Cool Combo Engine and Transmission Cooler on 1999 Ford Van
  When installing the Derale Electra-Cool Combo Engine and Transmission Cooler Assembly w/ Fan # D15200 you'll need the fittings # D13014 and # D13024 as well as the install kit part # D13006 which provides the hose and brackets for your 1999 Ford E-150 van for the transmission portion as well as the # D15752 for the engine oil.
  view full answer...
• Transmission Cooler Recommendation for 1988 Ford F-350 with 460 Cubic Inch Engine
  I'd recommend a larger transmission cooler for your 1988 Ford F-350 with a 460 cubic inch engine like the Derale part # D13504 which measures 11" Wide x 12" tall x 7/8" deep. This is a larger plate-fin style cooler which is going to be very efficient and provide the best cooling. To make the install easier you'll need the fittings # D13014 and # D13024 which make attaching the hoses to the radiator fittings much easier since they thread right on.
  view full answer...
• Parts Needed to Install Derale Transmission Cooler D15200 on 1999 Ford Van
  To install the Derale transmission and oil cooler part # D15200 on your 1999 Ford Van you will need the fitting adapters you mentioned of # D13014 and # D13024 as well as the transmission cooler install kit part # D13006 and the engine oil cooler install kit part # D15752 to have all the components needed.
  view full answer...
• Does Supplemental Transmission Cooler Replace Factory Cooler of 1996 Ford F-150
  Ideally you actually install supplemental transmission coolers like the Derale part # D13504 after the factory cooler so that you get the cooling power of both coolers. This means you would not have to plug the ports on your radiator. You will also want the install fittings part # D13014 and # D13024 to make connecting your radiator as easy as possible and you'd be set.
  view full answer...
• How to Determine Fit of Oil Cooler for 1998 Ford F-150
  When it comes to transmission coolers they are not a vehicle-specific fit so any cooler, including the Derale 25-Row, High-Performance, Stacked-Plate Cooler # D52506, will fit depending on how much space you have in your 1998 Ford F-150; this one is 13" Wide x 9-3/16" tall x 2" deep. If you take a look at the linked help article on transmission coolers you can see exactly how they fit. A stacked-plate cooler is a great, heavy-duty option but if the 2" depth is too much another option is...
  view full answer...
• Transmission Cooler For 2007 Ford F150
  You can indeed install a cooler like the # D52506 in place of the existing factory cooler, but you might consider installing it inline between the radiator and transmission as outlined in the help article I've provided. This will provide additional cooling which will work great because unless you live in a very cold climate, you really can't over cool a transmission. You'll need one of two fittings. Use kit # D13024 for vehicles with 1/2"-20 thread on trans line fitting, or use kit # D13025...
  view full answer...
• Stacked Plate Transmission Cooler Recommendation for F150 Ford 2010
  The best transmission cooler will be the largest cooler you can fit in front of your radiator. Transmission coolers work best when mounted at the very front of compartment, (in front of the radiator)BEHIND THE GRILLE. You will want to measure this space to know how much room to have to install a cooler. The Derale 19-Row Stacked Plate Transmission Cooler Kit # D13403 you referenced measures 13 inches wide x 7-5/16 inches tall x 2 inches deep. As long as this cooler fits behind the grille...
  view full answer...
• How to Install the Derale Plate-Fin Engine Oil Cooler Inline with another Oil Cooler
  That depends on the size of the hose that is used to install your current oil cooler. If the line is the same as what comes with the # D15405 that you purchased all you would need is 2 sets of the # D13024 so that you could install the cooler inline with your current cooler. You would need to thread each set of the fittings together and tighten them down so that you would have two male end fittings. From there you would need to cut your current oil cooler hose and install the # D13024...
  view full answer...
• Hose Size and Fittings to Install a Transmission Cooler on a 2010 Ford F-150 4.6 Liter
  The type of fitting to use will depend on the thread type used on the transmission line fittings on your 2010 Ford F-150. If they are 1/2"-20 threads use kit # D13024. If they are 5/8"-18 use # D13025. If you can measure the diameter of the threaded part of a fitting on your truck that will tell us which one is correct. If you are getting a kit such as # D13504 then the proper size hose is included. The standard hose is 11/32 inches inner diameter.
  view full answer...
• Transmission Cooler Recommendation for a 2009 Ford F-150 STX 4.6L
  We have a few excellent transmission coolers that would be great additions to your 2009 Ford F-150 STX, but they will each be a little larger than your factory cooler and rightfully so since you will be towing a 7,000 lbs trailer. My best recommendation is the Derale Stacked-Plate Transmission Cooler Kit, # D13402. The stacked-plate coolers are the most efficient tranny coolers on out there, so you can rest assured that it will be doing the most to keep your transmission fluid cool when...
  view full answer...
• Installation of Transmission Cooler in 2010 Ford F-150
  The Derale Transmission Cooler # D13612 will install after the radiator of your 2010 Ford F-150. You'll need to find the return line which will be the cooler of the transmission lines when the engine is warmed up. If you have 5/8 inches-18 transmission line fittings you would use the Transmission Cooler Fitting, # D13025. If you have the 1/2 inches-20 transmission line fittings you would use Transmission Cooler Fitting, # D13024.
  view full answer...
• Recommended Transmission Cooler For 1995 Ford F250 With 7.3L Diesel Powerstroke Engine
  The Derale Transmission Cooler, part # D13614 is designed to work with your 1995 F-250 with the 7,3L diesel. Since you said you have a small cooler already I recommend running the fluid through the cooler you have and then through the # D13614, and then through the radiator. This would be the optimal way to cool your fluid. To make it much easier to install the hoses it is recommended to use part # D13024 if you have 1/2-inch-20 threads. If you have 1/4 or 3/8 inch NPT-trans-line fittings...
  view full answer...
• Transmission Cooler Recommendation for 2007 Ford F-150 with V6 Engine
  The Derale cooler part # D13503 is a fit for your 2007 Ford F-150. This cooler is very universal in what it can fit and your Ford truck would work well with it. For the quick install fittings the part # D13025 would be what you need if you have 5/8"-1/8 lines or part # D13024 for 1/2-20 fittings.
  view full answer...
• Radiator Adapter Fittings for Derale Series 8000 Transmission Cooler on 2010 Ford F-150
  There are two different options for your 2010 Ford F-150 for adapter fittings to use with the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13504. Using a different adapter size is not going to cause any issues, and you are going to need to know the size of your fittings, or measure to determine due to there being two potential options for your 2010 F-150: - 1/2"-20 Thread: Derale Radiator Adapter Fittings for Ford and Lincoln # D13024 - 5/8"-18 Thread: Derale Radiator Adapter...
  view full answer...
  
• Transmission Cooler Recommendation for 1996 Ford Bronco with 302
  For your 1996 Ford Bronco the Derale transmission cooler part # D13504 would be an excellent option. This larger cooler will do a great job keeping the transmission fluid much cooler. This cooler measures 11" Wide x 12" tall x 7/8" deep. To make the job easier you'd then want the fittings part number # D13014 and # D13024. These will allow you to install the cooler without having to cut or flare any line.
  view full answer...
• Transmission Cooler Recommendation For A 1989 Ford F-250 With 460 c.i. Engine And C6 Transmission
  Thanks for checking back with us for your towing needs. For your 1989 Ford F-250 with the 7.5L (460 c.i.) engine and towing a 7500 lbs trailer I would recommend using a Class IV transmission cooler. The Class IV rating will handle towing up to 12000 lbs. The Derale Series 8000 Transmission Cooler Kit, # D13504, that you have referenced is a plate-fin cooler and is one of the best Class IV coolers we carry. The Derale transmission cooler will fit inline with your factory transmission cooler. The...
  view full answer...
• Do Transmission Coolers Install the Same Way on Every Vehicle
  Transmission cooler installations are not vehicle specific because transmission coolers themselves are not vehicle specific so they general way they install will be the same. What is different is where you may need to mount the cooler, whether or not you will have to cut and flare lines, and what you might need to move out of the way to install the cooler in the most efficient place. All of these things are different from vehicle to vehicle. The path of the transmission fluid should be...
  view full answer...
• What Upgrades Are Needed For Heavy Towing With a 2010 Ford F-150 Platinum
  If you will be towing a heavy trailer with your 2010 Ford F-150 Platinum then a set of suspension enhancements as well as a larger transmission cooler will certainly provide benefits. The suspension enhancements are going to not only make for a better ride while towing but will also help to improve the longevity of your existing suspension components. The supplemental transmission cooler will improve the performance of your transmission while towing as well as improve its longevity. For...
  view full answer...
• Transmission Cooler Recommendation for 2003 Ford F-150 with 5.4 liter V8
  Yes we have transmission coolers that will work great installed on your 2003 Ford F-150 with a 5.4 liter V8 engine like the larger and very efficient Derale # D13504 that requires the adapters # D13024 and # D13025.
  view full answer...

Do you have a question about this Accessories and Part?