bing tracking image
  1. E Track
  2. Erickson
  3. E Track Anchor
  4. 1333 lbs
Erickson E Track Tie Down Ring - 1,333 lbs
Erickson

Erickson E Track Tie Down Ring - 1,333 lbs

Part Number: 59131
In Stock
$8.50
Retail:$28.18
You Save: 70%
E Track
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Attaches anywhere along E track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure. 1-800-940-8924 to order Erickson e track part number 59131 or order online at etrailer.com. Free expert support on all Erickson products. Great prices and Fastest Shipping for Erickson E Track Tie Down Ring - 1,333 lbs. E Track reviews from real customers.
  • All Info
  • Reviews (927)
  • Q & A (0)
  • Videos (3)
  • Photos

Erickson E Track - 59131

  • E Track Anchor
  • 1333 lbs
  • Erickson

Attaches anywhere along E track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure.


Features:

  • Tie-off Ring
  • Color may vary
  • Not compatible with Snap-Loc E track Tie-Down Anchors


Specs:

  • 4,000 lbs Capacity
    • Safe Working Load Limit: 1,333 lbs
  • Ring dimensions: 1/4" thick x 1-7/8" inner diameter


Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.



59131 Erickson E-Track Tie-Off Ring - 4,000 lbs





Video of Erickson E Track Tie Down Ring - 1,333 lbs
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Complete Breakdown of the Erickson E Track Tie Down Ring

Today we are going to show you part number 59131 from Erikson. This is a part to our E-Track. This is an E-Track D-Ring which is rated at 4,000 pounds. It will fit on all traditional E-Track systems. We will go ahead and show you how it works. All you do is pull this little tab back and it snaps into place then you can tie off what you want to it. You can even attach a regular tie down to it. That is it for part number 59131 from Erikson the 4,000 pound D-Ring.

Customer Satisfaction Score:

Ratings & Reviews

4.9

927 reviews
Review sort icon
Attaches anywhere along E track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure.

by:

These compact tie-down rings are ideal in close quarters where space is limited.

Rbs profile picture

Rbs

12/1/2016

Perfect



by:

Love these rings. Good quality product and they always get the job done.



by:

I purchased E track and accessory's. All the straps and E track are awesome products.
Shipping was fast arrived in three days.



by:

The Hold is strong in the e- tracks and holds 1200 lb Polaris RZR in place on the worst of roads. Very pleased with my snap in e-track brackets!!!!



by:

Easy to attach and use with generic cargo straps. I have used these tie-down rings for several interstate trips hauling light cargo and motorcycles with no problems. Large ring allows easy threading of cargo straps and attachment of strap hooks.



by:

Works great with my trailer that is set up for it. Much better than trying to hook around something on my Diamond T trailer. This device works well and took us and our bikes to Sturgis and back. Also, in a separate trip 7000+ miles to the East coast from the West coast and back.

Dale W. profile picture

Dale W.

7/31/2021

great. They hooked right onto the slots and held a lot of pull on th without failing.



by:

I'm very pleased with everything I've ordered from you and anytime that I need something for my trailer I will definitely order from you. Everything is always met the standards that I figured it should.

Gary B. profile picture

Gary B.

11/1/2017

I continue to be very pleased with the product I bought from you.



by:

We are using these e-track tie-down rings in an enclosed trailer - to (mostly) tie down large motorcycles.

These were actually ordered by mistake. I almost always go way over and above and get the heaviest-duty hardware available..... but am pleasantly surprised at the quality, fit, and finish on these tie down rings.



by:

This product has worked exactly as designed and is easy to use. I wish I had purchased the e-track system years earlier and not have had to constantly deal with loose straps and vehicle movement with ordinary tie-down rings. The e-track system works great and I definitely recommend it for anyone trailering a vehicle.



by:

I Installed approx 14 feet of e track Two rows long in my enclosed trailer to go under my tires for my side by side. It has worked out better than expected as I can secure things down the entire length of my trailer . The side by side is secured with wheel bonnets and does not move one inch while traveling from my place in Utah to my place in Wyoming. Love this product and highly recommend .



by:

Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products !



by:

Great company to deal with and excellent products. Plan to use E-Track tie down rings to tie down miscellaneous things in an enclosed car hauler trailer.

Wes T. profile picture

Wes T.

9/17/2017

The tie down rings are great. Easy to use and hold everything I attach to them.



by:

These feel a bit cheap and cheesy but they work great. I had installed E-track lengthwise (front to back) on the floor of my trailer and have a lot of need to tie loads with diagonal and/or track to track forces and these worked great for that, since they seem to be pullable in any direction without deforming. The heaviest item I fasten down is a walk behind lawn mower.

Kaas B. profile picture

Kaas B.

7/26/2017

We still use these a lot and are still on our original ones. All other latching items we got for the e-track bent too easily but these are great.



by:

Awesome idea! These are great to have with the E Track system!!!



by:

I have a 20 ft enclosed cargo trailer that I planned to use to move from California to North Carolina. Was not sure about how to secure the load. Did some research and settled on the E Track system. Not having ever used E Track before, I found the instillation and use very simple. I installed two rows on each side the full length of the trailer. In the front I used the optional E track board holders and made a shelf 8ft by 4ft with 2 x 6's and a full sheet of plywood to secure fragile items. Two trips across the United States with very full loads and not one load shift. Great product and would highly recommend it. Thank you etrailer.com for your great service.

Dave B. profile picture

Dave B.

7/25/2017

A year and a half later and a lot of use out of my trailer using the E Track system to secure the loads. Great produce that was easy to install and easy to use. HIGHLY recommend the E Track system.



by:

Excellent product! I bought 2 of the 4-ft e-tracks. These are heavier duty than I thought they would be. They are extremely practical for my 10' wood floored utility trailer. If you are like me, there aren't many good tie down points on wood bottomed trailers. These are an easy fix for a host of applications. They work great for having multiple points to tie down my 4-wheeler or lawnmower. I will definitely recommend! The only better would have been free shipping.



by:

I think these E-Track tie rings will work out perfectly. In another review, I review the E-track Wood Beam Sockets and how I made a tire rack and shelves in my car trailer using the E-Track which I also bought from E-Trailer.

I'll use these E-Track tie offs to tie down the tires, and any loose items on the shelves, so that they don't bounce around which on the road. It'll be a breeze to use either some straps or rope to tie down anything I need to, and having the flexibility to position these tie downs anywhere I want on the E-track, is absolutely perfect.

I also thought that they were priced fairly and made well. Add to those qualities all the benefits of doing business with E-Trailer and it's a home run!

Jim M. profile picture

Jim M.

10/6/2015

As I thought, these E-track tie down rings worked out perfectly. Nothing has ever fallen, bounced, or even moved pout of place when straps are used to secure the load to these E-track rings.



by:

I've used these Erickson E-Track tie-off rings for many years in all my other trailers. I bought a new trailer and therefore, needed new tie-off rings. These units are the lighter version of ring available from Erickson and I've used both types to secure my ATVs. I've never had any problem with either tie-down. These units are plenty strong enough to hold any ATV, motorcycle. In fact, I've hit terrible potholes and other obstacles with my trailers over the years, that I've had ATV's pop the tie-down straps off. However, no matter how hard the jolt, I've never had one of these Erickson rings pull lose, bend, crack, or any other malfunction. In addition, they are super easy to remove, reposition, attach etc. They lock into position as soon as they are fully inserted into the E-tracks sytem.

Ronbo profile picture

Ronbo

3/10/2016

Thanks for the follow-up. All the products I purchased are performingwonderfully!



by:

Best cargo anchors. Use them a lot on both my cargo and utility trailers....Shipping costs are nominal compared to other sites....



by:

We've finally been able to install the etrack in our trailer and it looks, and works, great. I've attached a few pictures we took of the installation.



by:

the BeastAttached are pictures of the "Beast" The truck and trailer are utilized to
haul a miniature C-130J aircraft in support of Air Force Reserve recruiting
activities in Louisiana, Mississippi, and Alabama. We exclusively use
etrailer.com for our E track straps and D rings.

haul a miniature C-130J aircraft in support of Air Force Reserve recruiting
activities in Louisiana, Mississippi, and Alabama. We exclusively use
etrailer.com for our E track straps and D rings." />

by:

Let me just start by saying I Love etrack! These tie off rings make loading the truck and trailers quick and easy. I even installed a couple on the side of my tailgate so i could strap down longer items when tailgate is open. (Dont forget to remove the ring when done and closing tailgate)



by:

As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.



by:

Perfect for strapping down anything in your trailer with easy tracks

Doug L. profile picture

Doug L.

7/18/2018

Still working like day 1.



by:

Great for my home gym. Sturdy. Low cost. Vertically mounted the Erickson Horizontal E-Track and used the Erickson E-Track Tie Down Rings with carabiners for easy height adjustments and swapping out different bands, just like at Fluid Health & Fitness where I take classes and work with a Movement Specialist. The 1 x 4 board is screwed to a wall stud and then the E-Track is attached to the board and into the sheet rock. The Man of the House says he "over-engineered" it. ??


25
25

See what our Experts say about this Erickson E Track

  • B and W Biker Bar for Harley Street Glide and Ultra Models
    Hey Donnie, for all three of your Harleys the correct Biker Bar would be the part # BWMC2301. BUT we don't have a solution for the Indian. They only have options for Harleys at this time. I wish they would make options for other brands as this does come up. So to transport it you'd need something like E-Track # e95VR, Wheel Chock # 3481731, Tie-Down Ring # 59131, and Strap # EM59136. Think that would work for you?
    view full answer...
  • Mounting Suggestion For E-track To Aluminum Utility Trailer
    For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 # E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide # e96RR. This will save you the expense of the dual track and will allow you the flexibility of plates between the braces or around them. This track also comes in 4 foot # EM19147, and 2 foot # EM59150. I recommend using the E-Track Plastic End Cap # ET8730 to finish your tracks. For...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Option to Carry Kayaks with E-Tracks Inside Cargo Trailer
    I am not aware of an e or x-track accessory that is designed specifically for carrying kayaks but we do have options for this assuming the tracks are on the walls. I recommend using a few CargoSmart Large Rotating Flat Hooks part # 3481701 to suspend the kayaks and then a few Erickson E-Track Straps with Ratchet part # EM59136 to hold them in place. The Erickson E-Track Tie Down Ring part # 59131 along with some standard ratchet straps can be used as well.
    view full answer...
  • Will Biker Bar Fit 2022 Indian Chieftain Limited
    Hey Paul; B&W hasn't tested the 2022 Indian Chieftain Limited but it may fit the # BWMC2304. To find out if it will fit you will have to take some measurements. A two piece motorcycle tube frame is needed for the Biker Bar to clamp onto. The diameter of each frame tube must be at least 1.125" and no more than 1.5". Check that there is nothing hanging down below the tube frame, such as a motor, transmission or exhaust. With the rider sitting on the motorcycle, the distance from the side...
    view full answer...
    Image 1 for
  • Will Biker Bar Fit 2011 Harley Superglide Custom
    Hi Eric; B&W doesn't have specific fitment information for a 2011 Harley Superglide Custom. However, you may be able to use the B&W Biker Bar # BWMC2304. To find out if it will fit you will have to take some measurements. A two piece motorcycle tube frame is needed for the Biker Bar to clamp onto. The diameter of each frame tube must be at least 1.125" and no more than 1.5". Check that there is nothing hanging down below the tube frame, such as a motor, transmission or exhaust. With the...
    view full answer...
  • Is There Biker Bar For Indian Super Chief Limited
    Hi Kristi, B&W does not make a Biker Bar for your Indian Super Chief Limited, so to transport it you'd need something like E-Track # e95VR, Wheel Chock # 3481731, Tie-Down Ring # 59131, and Strap #EM59136.
    view full answer...
  • What Motorcycle Frame Tube and Frame Width Do the B&W Biker Bar Motorcycle Tie-Down System Fit
    The B&W Biker Bar Motorcycle Tie-Down Systems we carry are only designed to fit certain models of Harley-Davidson and have not been tested for other bikes like your Kawasaki Vulcans. It is possible they can work with your bikes if they have double tubes but you will need to know a couple of dimensions, the frame tube diameters and the frame width. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 requires a frame tube diameter of 1-1/8" to...
    view full answer...
    Image 1 for
  • E Track Placement Recommendation for Motorcycle Trailer
    Basically you'll have to mock up where you want the motorcycle to be and where the best place will be for the e-track as there isn't a set place to install the tracks in every trailer. Typically you want the tie down anchors to be about 36 inches apart from each other to get the best angle for them to pull down. For tie down anchors that fit in the e-track slots we have the part # 59131 which would fit and work well. Then for a set of ratchet straps the Erickson kit part # EM31353 would...
    view full answer...
  • E-Track and Parts Needed For Securing Motorcycles In a Enclosed Trailer
    Yes, you can place the etrailer Horizontal E-Track # e25VR across your trailer from side to side. This will allow you to use the CargoSmart Motorcycle Wheel Chock # 3481731 making it easier and safer to secure your bikes in your trailer. Be sure to use the etrailer E-Track Backing Plates w/ Hardware # e46RR to secure each of the 5' tracks in place. Each of these kits includes 3 brackets for each track. I recommend using the Erickson E-Track Tie Down Rings # 59131 and Cam Tie-Downs # EM05729...
    view full answer...
  • Can Buyers Products Sliding Winch Track Be Used as Trailer Tie Down Anchor
    Yes, the Buyers Products Sliding Winch Track # 3371903040 can be installed on a flat steel surface to secure a load, as you mentioned. Since it's designed to allow a winch to slide along that channel, for this purpose, the channel must face down. However, installing it with the C-channel facing up does not affect its functionality for your application. That being said, I believe the Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 5' Long # E19148 will work much better for...
    view full answer...
    Image 1 for
  • Where to Install E-Tracks in Enclosed Trailer Carrying Polaris ATV and Motorcycles
    Since you will be using your E-Track system, part # E19148, for transporting more than one type of vehicle, you will want to try to find mounting locations that will work for all of them. The main consideration for deciding where to mount the E-Tracks is to select locations that provide access to structural components, such as wall studs and floor supports. These structural elements of your trailer will serve as the backbone of your E-Track system. It is important that the tracks mount...
    view full answer...
  • E-Track Recommendations For 7 By 14 Enclosed Trailer To Carry Classic Motorcycles
    With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I recommend you make sure they are secured either to the metal structure of the trailer or use metal plates like the E-Track Backing Plate, part # e96RR, to make it as secure as possible. If the interior floor and walls are 7 ft long I recommend 5...
    view full answer...
    Image 1 for
  • E-Track Recommendation for Securing ATV to Utility Trailer
    E-track can easily attach to the wood floor you have in your open utility trailer. This is a very common style of trailer that is used with the E-tracks. I attached a couple review videos that show etracks installed in a similar trailer as yours and what they use to secure the cargo. The etrack sections like the part # E19148 would be more than adequate to secure your ATV. The # 59131 is a great anchor to use, or if you want a strap that attaches directly to the etrack we have the # EM59136...
    view full answer...
    Image 1 for
  • Single E-Track Anchor for E-Track Tie-Off Ring # 59131
    In the picture, the customer is using the Erickson tie-off ring # 59131 with single E-track anchor, # SLSB. There is also a stainless model, # SLSS, and a zinc model, # SLSZ. If you want one you can paint yourself there is also an unfinished model, # SLSU. I have linked a couple of videos to the right for you. There are all kinds of E-track accessories that could be used in the anchors. I have also included a link with the accessories, anchors, and tracks for you.
    view full answer...
    Image 1 for
  • Hardware Recommendation for Securing E Tracks to Plywood Trailer Floor
    Securing the Erickson E-Track # E19148 to 3/4 inch plywood should be sufficient. To secure the track to the plywood, you can use screws, or rivets. Using 1/2 inch screws would be a good length with 3/4 inch plywood. You will want to attach screws at least every other mounting hole. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch D-Ring, part # E59143. Also available is the Erickson E-Track Strap with Ratchet, part # EM59136.
    view full answer...
  • Can the Erickson Horizontal E-Tracks Be Mounted On a Ceiling for Punching Bag
    E-track can be used on a ceiling since it is designed to hold quite a bit of weight to the track. Commonly people secure vehicles to the track on the floor of a trailer so a ceiling mount (through a stud) to hold a punching bag would be definitely doable. For an anchor with a ring to use with the track # E19148 you'd want just the part # 59131.
    view full answer...
  • How Does Etrailer Slot and Anchor Typically Install on Truck Tailgate
    Sounds like you are talking about using a single E-Track slot like part # SLSB to instal the Erickson E-Track Tie Down Ring # 59131 in a tailgate application like the picture we recieved from a customer who did the same. There isn't an exact recommended way to accompolish this. It looks like the picture you referenced has a tailgate that has an internal panel that can be removed so that the customer could use nuts and bolts to hold the slot to the side of the tailgate. We don't have exactly...
    view full answer...
    Image 1 for
  • E-Track Recommendation to Secure 4 Motorcycles in an Enclosed Trailer
    You would be more than okay to run two tie downs off of one the E-Track Tie-Off Ring part # 59131 that you referenced. Each of these has a 4,000 lb capacity which would be more than enough for what you are doing. Your plan to use 9 of the E-Tracks # EM59150 with the # 59131 like the drawing you sent in would work perfectly. For backing plates you could use the part # e96RR. I attached an install video for the E-track for you to check out as well.
    view full answer...
    Image 1 for
  • Anchoring E-Track On Floor Of Van For Transporting a Motorcycle
    To secure the Erickson Horizontal E-Track # EM59150 you need to use the E-Track Backing Plates # e66RR to secure them to the floor. The screws can easily pull out of the plywood especially considering your van will be absorbing a lot of road shock. You will want to ensure that the plywood is also secured to the floor either with the backing plates or in another similar manner. This will ensure that your Harley stays secured to the floor and will not move. I recommend using the Erickson...
    view full answer...
  • Is it Possible for E-Track and Snowmobile Carbides to Scratch Each Other
    From what I understand about snowmobiles, and please correct me if I am wrong because I have little knowledge on them, the carbides are the part the skis attach to. Is that correct? I am not sure how the E-track or the carbides would come into contact with each other. But if they did then it would be possible for one to scratch the other. To avoid that you could use 3 lengths of tracks; one on the far left side and one on the far right with one in the center between the snowmobiles so...
    view full answer...
  • E-Track and Motorcycle Wheel Chock Recommendation for Securing Motorcycle to Trailer
    That sounds like a great plan, the E-Track part # E19148 will provide a great tie-down point for securing the motorcycles. For tie-down rings you would want the # 59131 and then for a wheel chock I would recommend the # 3481731 because of how well it secures motorcycle and how easy it is to use. Check out the review video I attached for more info.
    view full answer...
  • Length of Buyers Products Super Track Kit
    The Buyers Products Super Track Kit # 337ST93 only comes in a length of 46-1/2 inches, or just under 4 feet. There is a 5 foot length of E-Track, the Brophy Horizontal E-Track # ET05 which will allow you to use the Erickson E-Track Tie Down Ring # 59131. I have added a link to a video review of the Buyers Products Track Kit for you to take a look at.
    view full answer...
  • Can the Erikson E-Track System Be Used In An Aluminum Utility Trailer
    The Erickson E-Track system will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals. This layer can consist of almost any material, such as wood, rubber, or plastic. When installing the E-Track system in a trailer, one thing to keep in mind is to select locations that provide structural components, such as wall studs and floor supports....
    view full answer...
  • Will Biker Bar Fit Indian Pursuit 23
    None of the Biker Bars will fit your Indian Pursuit since it lacks the two piece tube frame to clamp onto. I recommend adding some E-track like # E19148 and then using some tie down rings # 59131, straps # EM59136, and a wheel chock # 3481731 to secure your motorcycle.
    view full answer...


< Previous
12



Do you have a question about this E Track?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Andy C
Installed by:
Andy C
Employee Wilson B
Updated by:
Wilson B
Employee Jacob W
Updated by:
Jacob W
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.