Shelves, boxes, panels, and other mounted pieces do not have to stay fixed in one cargo layout. This connector plate screws to wood or metal, then uses a spring-loaded E-track fitting so the attached piece can be installed, removed, or repositioned.
This connector plate mounts to wood, plywood, metal, shelving, or a box, giving that piece a direct connection to your Snap-Loc or E-track system. The spring-loaded lever snaps into the track and releases again when you want to remove or reposition the mounted piece.
Two mounting holes secure the plate with wood screws or self-tapping screws (sold separately), and the holes accommodate 1/4" screws. Once fastened to your piece, the plate gives it a 133-lb safe working load limit at the E-track connection.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with Etrailer. Let's take a quick look at this Snap-Loc E-Track connector plate. Now this connector plate is going to let you turn almost any wood or metal item into something that's going to be able to quickly attach to E-Track or Snap-Loc Track. You're going to be able to mount this to plywood, shelving, storage boxes, wall studs, or metal using two quarter inch wood screws or self-tapping screws, which are sold separately from this. Let me real quickly give you some measurements here.
So looking at the overall length, we're sitting right at about 7 3/8 inches long. The width right at about 1 1/8 inches. And then the height, about 1 1/4 inches tall. Once this is mounted, the spring loaded lever is going to make it easy to lock the item into an E-Track slot and remove it again when needed. This means that you can move shelves, boxes, equipment, or other mounted items between different track locations without having to permanently install them in one spot.
The connector itself is made from thick zinc plated steel for strength and corrosion resistance. This has a 133 pound working load limit and a 400 pound brake strength, giving you a sturdy way to create movable E-track compatible storage or mounting solutions. Just occurred to me, one other measurement that you might be interested in. Let me see if I can give it to you real quick. The mounting hole on center looks like we're sitting pretty close to 6 5/8 inches.
So on center, 6 5/8 inches. Well, I think that's gonna wrap up our quick look today. Again, they call me Andy. Thank you for joining me.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.