bing tracking image
  1. E Track
  2. Snap-Loc
  3. E Track Anchor
  4. E Track Rails
  5. Horizontal
  6. Vertical
Snap-Loc E Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Matte Zinc - Qty 1
Snap-Loc

Snap-Loc E Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Matte Zinc - Qty 1

Part Number: SLSZ
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$4.81
Retail:$14.47
You Save: 67%
E Track
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor has a zinc finish to resist corrosion. Bolt on wherever you need a strap-down point. Hardware sold separately. 1-800-940-8924 to order Snap-Loc e track part number SLSZ or order online at etrailer.com. Free expert support on all Snap-Loc products. Great prices and Fastest Shipping for Snap-Loc E Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Matte Zinc - Qty 1. E Track reviews from real customers.
  • All Info
  • Reviews (252)
  • Q & A (0)
  • Photos

Snap-Loc E Track - SLSZ

  • E Track Anchor
  • E Track Rails
  • Horizontal
  • Vertical
  • 1/2 Foot Long
  • 1000 lbs
  • Snap-Loc
  • 1 Inch Wide

Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor has a zinc finish to resist corrosion. Bolt on wherever you need a strap-down point. Hardware sold separately.


Features:

  • Single E track anchor lets you add a tie-down point anywhere on your trailer or truck bed
    • Bolt to the wall or floor of your trailer to add a traditional tie-down point
    • Add to the ceiling for overhead storage of ladders or other long loads
  • Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use
  • Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately)
  • Use upside down as a recessed tie-down point
  • Works with Snap-Loc cargo straps and ring attachments and with any E track accessories (sold separately)
  • Sturdy, 3.5-mm steel construction
  • Matte-zinc-finished surface resists rust
  • Made in the USA


Specs:

  • Dimensions: 5-15/16" long x 1" wide x 1/2" tall
  • Maximum load (break strength): 3,000 lbs
  • Safe working load limit (WLL): 1,000 lbs
  • Spacing of mounting holes: 5-1/16" apart on center
  • Mounting hole dimensions: 3/8" x 3/8" square
  • Limited lifetime warranty


Various Snap-Loc tie-down anchors installed in trailer to strap down cargoVarious Snap-Loc tie-down anchors installed in pickup truck bed

Great for contractors, movers, motorcyclists and anyone who tows. The Snap-Loc bolt-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies. Just bolt the anchor onto any smooth surface in your trailer, truck or garage, and it's ready whenever you need to tie down a load. Put the anchor on your trailer floor and you can strap pallets directly to it, or attach an anchor to your trailer wall to provide a strap-down point. Mount the Snap-Loc anchor to the ceiling so you can secure ladders or other long loads above the cargo that's on the floor.


Square-hole Snap-Loc anchor with carriage bolt hardwareHardware Fitting inside square-hole Snap-Loc

Snap-Loc anchors have a square-hole design that allows for easy one-person installation using Snap-Loc carriage bolt hardware (sold separately). There's no need for another person to hold the bolt to keep it from spinning as you install the nut. The square-shaped underside of the carriage bolt fits snugly into the square hole of the Snap-Loc, which prevents the bolt from turning. This makes it much easier to install in a trailer wall or floor.


Inserting an E Track cargo strap into a Snap-Loc

E Track accessories, such as cargo straps (sold separately), snap securely into the anchor slot using a spring-loaded mechanism. Just pull back on the E Track attachment's lever, put the end into the slot, and then release the lever.


Chrome Snap-Loc E Track anchor with Loc-Ring

Use the anchor with a Snap-Loc Loc-Ring (sold separately) to tie down equipment or large loads, secure your camping supplies, or trailer a motorcycle.


Black Snap-Loc installed on the side of truck tailgate

The Snap-Loc has a low profile, so it fits in places that other anchors don't - even on the side of your open tailgate. You can still close your tailgate as usual with the anchor installed. The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single E Track anchor can be installed upside down - your E Track accessories will still lock into it securely.


The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long E Track sections. And the matte zinc finish resists rust.



SLSZ Snap Lock Zinc E-Track Tie-Down Anchor - 3.5 mm

Replaces SLZ35






Customer Reviews

Snap-Loc E Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Matte Zinc - Qty 1 - SLSZ

Average Customer Rating:  4.9 out of 5 stars   (252 Customer Reviews)

Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor has a zinc finish to resist corrosion. Bolt on wherever you need a strap-down point. Hardware sold separately.

by:

Nice anchors. The only issue I had was I needed to put a washer on the bold head because the square opening is so big. Not a big deal but something I didn't think about when I got these.

Ernie K. profile picture

Ernie K.

2/25/2024

After a year they are still holding fast at the anchor point. Beefy and will probably outlast me!!



by:

Excellent option for securing the 4 wheeler and other loads on my utility trailer. It was always a fight to get the straps in the right place until I bought these.



by:

So, here we are, one year later...... These things are great - We use these in an enclosed trailer for tying down equipment, motorcycles, and what seems like all of the relatives' furniture, at one time or another.

They're mounted on the walls and in corner areas with lag screws into the cross members and they're working very well.



by:

Nicely made Zinc plated bracket. You have to supply your own fasteners, I used 2 1-1/4" x 5/16" Galvanized stove bolts with flat and lock washers and nuts to attach to my boat trailer. Beats fussing with ratchet straps under the trailer. Buy 'em.



by:

Works great where you can't or don't want to install an e-track.

Snap locks are also great.



by:

Easy in and easy out. Perfect for my constantly changing trailer needs.



by:

Always fast and great service. These tie-downs worked so easily and well, I purchased more.



by:

Great low profile anchor point. Easy install with carriage bolts.



by:

I had to grind every one in order to make the rings fit.
The cad plated worked fine but these galvanized needed grinding



by:

These are very sturdy. Great for an area where you just need a single anchor point.

Ryan profile picture

Ryan

5/25/2020

Still awesome. Very well made. Perfect for areas where a full rail cannot be used.



by:

These worked out great for my trailer. I also bought the straps to go with them. Both worked great.



by:

Good customer service pointed out this product and it fits my needs for truck and trailer tie down. Delivery was fast.



by:

These are great for adding a latch point for equipment in my concession trailer since I do not need a range of latch points. They hold strong and are simple to install. Hold a 350 lb refrig. while driving no problem.



by:

These look strong, and hope to use them on the sidewalls of my box trailer.



by:

Perfect for my ranger tie down system



by:

Good staff, got on time.

Marek profile picture

Marek

1/25/2016

Works great, good product.



by:

Product worked well for our application.



by:

everything i have ordered from your store i'm pleased with. i would buy from you again.



by:

Fast shipping and good communication on the items that were on back order. Will buy from them again.



by:

Love them, I can put hem right where I want.



by:

Company is quick to respond and has great customer service and products



by:

I have ordered here several times. You will never find better customer service, products or faster shipping!



by:

great products, fast shipping, great customer service, will order again



by:

Look to fit the bill. Heavy duty and all clips fit nicely.



by:


25
250
Show More Reviews

See what our Experts say about this Snap-Loc E Track

  • Is Backing Plate Needed for Snap-Loc E-Track Tie-Down Anchor?
    There is no backing plate we offer with the same 5-1/16" apart on center spacing that the mounting holes of the Snap-Loc E-Track Tie-Down Anchor # SLSZ. However, these anchors can be mounted onto any smooth surface and an E-track backing plate is not needed to install these anchors; all you need is the Carriage Bolt Hardware for Snap-Loc E-Track Tie-Down Anchors # SLHCBDS-P and you'd be set.
    view full answer...
  • How Many Holes Get Drilled to Install the CargoSmart Wheel Chock # 3481731
    According to the installation instructions you will use 4 attachment points when installing the CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires Item # 3481731 to your trailer. So you will need to drill 4 holes. I recommend adding the Snap-Loc E-Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Matte Zinc - Qty 1Item # SLSZ to attach the chock to the floor of your trailer.
    view full answer...
  • Replacement E-Track Clip Replacement for CargoSmart Motorcycle Wheel Chock
    The CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires # 3481731 does not have the E-clip replacements. If something were to happen, my contact said they would send you a replacement at no additional cost. If you just want to keep one on hand, I confirmed the clips are the same on the CargoSmart Storage Bin for E-Track or X-Track - Plastic - 50 lbs - 4" x 6" x 7" # 3481721 which would be the easiest way to have one on hand and utilized in the meantime if...
    view full answer...
  • Can CargoSmart Square Hook Fit With Single Anchors
    Yes, you can use the CargoSmart Small Square Hook # CS47FR with the single E-Track anchors: - Black # SLSB - Stainless Steel # SLSS - Matte Zinc # SLSZ - Unfinished # SLSU Since the anchors are rated for 1,000 lbs you'll be able to load the square hook up to the full 200 lb weight capacity.
    view full answer...
  • E-Track Parts to Secure Side By Sides and Dirt Bikes
    You can install the etrailer Horizontal E-Track # e62VR and drive over it just fine with a vehicle as the tracks only sit 1/2" tall - then you can secure your side by sides with a tie-down kit like part # EM98CV you were looking at. To secure the front wheel of your dirt bikes I recommend picking up a few of the CargoSmart Motorcycle Wheel Chock # 3481731 as well as a few of the single E-Track connections # SLSZ since the wheel chock connection points won't be as far apart as what you'll...
    view full answer...
  • Single E-Track Anchor for E-Track Tie-Off Ring # 59131
    In the picture, the customer is using the Erickson tie-off ring # 59131 with single E-track anchor, # SLSB. There is also a stainless model, # SLSS, and a zinc model, # SLSZ. If you want one you can paint yourself there is also an unfinished model, # SLSU. I have linked a couple of videos to the right for you. There are all kinds of E-track accessories that could be used in the anchors. I have also included a link with the accessories, anchors, and tracks for you.
    view full answer...
    Image 1 for
  • Availability of Vertical E-Track Where the Slots are Stacked On Top of Each Other
    Sounds like you are looking for vertical E-track like the part # E19146. This is e track that is similar to the # SLSZ you referenced but with the tracks stacked on top of each other instead. The mounting holes are 2-3/4 inches apart from side to side and 2 inches apart vertically.
    view full answer...
  • Cargo Tie Down Recommendations for 5x8 Enclosed Cargo Trailer
    Between the three cargo tie-down anchors you referenced, parts # RR2K, # RR8K and # RR09, I would go with the # RR2K because it includes the reinforcing backing plate and because it offers you the choice of recessed or surface mounting. Since your cargo items just need to be secured inside the trailer, but not have their full weight held, these items should be fine. I can offer you another option to consider, one that might better suit the trailer and cargo items, but that will be up to...
    view full answer...

Do you have a question about this E Track?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Tricia G
Written by:
Tricia G
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924