Complete Breakdown of the Erickson E Track Tie Down Ring Video

The warranty for the Andersen Rapid Hitch Adjustable, Aluminum Ball Mount Kit #AM3405 is one year. If you purchase this item from us the warranty will be upheld by etrailer.com as well as Andersen. We are an authorized dealer for the Andersen…

Trailer brakes can be either self-adjusting like the Dexter #23-468 or may require periodic manual adjustments like #23-27, depending on the particular model assemblies you have installed on the trailer. An easy way to tell if you have self-adjusting…

I can't confirm US Cargo Control as this is not a brand we carry but the e-track fittings are fairly standardized so you should be able to use any brand designed for e-tracks such as the Erickson E-Track Tie Down Ring part #59131 with the…

It sounds like you will be running screws through both wood and metal to install the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 94" Long - Qty 4 #e62VR. I would look for some wood-to-metal screws at the local hardware store to…

The weld bracket on the top of the Ark Drop Down Corner RV Stabilizer Jack Kit #ARK34FR is 4.6063" long and the surface that would make contact is 1.8307" wide. The overall width is 2.8543" on the top. I have attached a dimensional…

We have the Sportrack Kayak Carrier #SR5511 available that can fit crossbars that are 1-1/2 inch square like what you have so this would be a great solution. It's a J-style carrier which is easier to load from the side. We don't have any…

Yes the E-track accessories like the Tie Down Ring #59131 do fit in the BoxLink cleats in the bed of Ford trucks like your 2018 F-350.

For an LED license plate lamp like part #LPL41CB, the black wire is connected to the running light circuit so that the plate is illuminated when the vehicle head lights are turned on, and the white wire is connected to ground.

The #59147 is designed to fit E-tracks which have a length of 2.45-inches and a width of .58 inches. See attached diagram.

I went and pulled both the part #59131 and #59147 from our warehouse to get the dimensions you requested. The width of both measures 7/16 inch. The overall length of the part #59131 where it clips down into the e-track is 2-13/16 inches. That portion…

The Glo-Brite 9553 you have currently measures 6-1/2" x 2-1/4" x 2-1/4" so for an incandescent replacement option I recommend the Custer Trailer Tail Light - Submersible - Stop, Turn, Tail - Incandescent - Oval - Red Lens #G65R which…

The Optronics Fleet LED Trailer Tail Lights #TLL12RK are a slightly longer light so they aren't a replacement, but we do have the LED replacement you need for the Optronics #ST70RB. That part is the Optronics LED Trailer Tail Light #STL72RB. This…