Single E-Track Anchor for E-Track Tie-Off Ring # 59131

Question

Question:

Can you tell me where on your site I can find the slot that the individual used in this photo to put the ring into?

asked by: Nicole

0

Expert Reply:

In the picture, the customer is using the Erickson tie-off ring # 59131 with single E-track anchor, # SLSB. There is also a stainless model, # SLSS, and a zinc model, # SLSZ. If you want one you can paint yourself there is also an unfinished model, # SLSU.

I have linked a couple of videos to the right for you. There are all kinds of E-track accessories that could be used in the anchors. I have also included a link with the accessories, anchors, and tracks for you.

expert reply by: Michael H

0

click to enlarge

Answer 1

Sounds like you are looking for vertical E-track like the part #E19146. This is e track that is similar to the #SLSZ you referenced but with the tracks stacked on top of each other instead. The mounting holes are 2-3/4 inches apart from side to side…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 4

Welcome back Bryan! Horizontal E Track like item #e75VR in black or item #e35VR galvanized are going to be the best way to secure something heavy to the side of your utility trailer. The Horizontal E Track item #e75VR is a 3' long section that…

view full answer...

Answer 5

The Draw-Tite item #DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item #C29VV. This…

view full answer...

Answer 6

You can certainly adapt a 7-way trailer connector on a trailer to a 4-pole on a vehicle by installing the #37185 adapter you referenced. Simply use the included mounting bracket to install the adapter onto the vehicle, and plug the 4-pole portion of…

view full answer...

Answer 7

Hello John, thanks for reaching out. We do carry some 2" long 1/2" wheel studs, but I am sorry to say we do not have anything with a 0.56" spline diameter. What we have has either a 0.54" spline like part #DE52GR, or a 0.61"…

view full answer...

Answer 8

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 9

Something is obviously causing a voltage drop between the brake controller and the trailer connector. The usual culprit in this type of situation is a break in the wire or a corroded wire. Check the wiring under the truck. You should be able to trace…

view full answer...

Answer 10

It sure will, the Curt #C24VV TriFlex Brake Controller is indeed compatible with electric over hydraulic brake actuators. You will also need the #C51453 brake controller wiring harness. I'll link you to the instructions for the #C51453 wiring…

view full answer...

Single E-Track Anchor for E-Track Tie-Off Ring # 59131

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching