bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118408
Our Price: $69.76
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.15 lbs
Quantity: 
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector 4 Flat 118408
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118408 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (114)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118408

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Includes circuit-protected tail light converter to ensure that your vehicle's wiring matches that of your trailer
    • Provides protection against electrical shorts and overloads
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


Circuit-Protected Tail Light Converter

A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


This converter safeguards itself and your vehicle against possible electrical shorts and overloads with integrated short circuit protection. Just install the connector as indicated and rest assured that the wiring system of your vehicle will remain feedback-free.



118408 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118408 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118408

Average Customer Rating:  4.9 out of 5 stars   (114 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.

by:

No lame Covid excuses here! They are stocked with products & have employees who value their job. What a concept.
Couldn’t have been an easier experience with selection and I saved money.




by:
2007 Jeep Commander

I bought this hitch for my 2007 Jeep Commander. It was easy to find this on etrailer’s website. The install was fast and easy. etrailer sent helpful emails of the status of my order. I highly recommended etrailer.




by:

The product work great with no hiccups or problems, easy to install. It gives me peace of mind…




by:

The easiest way to wire for a trailer hitch I’ve ever seen… No cutting and splicing wires no soldering just plug them in and use them thanks for the simplicity




by:

One year later review. Everything hitch, wiring harness, receiver and ball even the rubber receiver cover are great. The product arrived timely and installed it with the help of floor jack (it’s heavy and I’m 69 yrs old) no problems. Holes were perfect and wire harness was plug and play. Very Happy




by:

I installed the wiring harness per instructions and ran the right side wiring in back of the hitch and zip tied it to the cross member. It isn't going to move or chafe at that point. I tested it on a test light and it works fine. I have it all buttoned up with no hanging wires. I did notice that there was no two sided tape provided as they had written in the instructions there would be. I provided my own.. and longer zip ties for the cross member. I also provided my own grounding screw as the one provided was short and the head wasn't wide enough for the ground connection. Other than that, it installed quickly.




by:
2010 Jeep Commander

The delivery of my hidden hitch trailer receiver, wiring harness, and hitch receiver cover for my 2010 Jeep Commander arrived quickly, the instructional on-line video was super helpful, and the installation was extremely easy. I am very pleased with the product and the customer service. Thank you.




by:

Easy install and works without any issu es!




by:
2006 Jeep Commander

I chose to use the OEM hitch and bezel for my Commander. I simply prefer the look. However, the OEM wiring is an absolute pain to install. It runs the entire length of the vehicle, and requires a computer flash from the dealer to make it work. I had the T-One harness installed in about a half hour, never used my wire stripper, and it works great. The kit looks to be of great quality, and the instructions were easy to follow. I would suggest a package of wire ties to secure everything. I finished off the installation with 30717 end connector. It mounted prefectly to the factory hitch, and gives an OEM look.




by:
2006 Jeep Commander

Super easy to install, more than enough wire to maneuver around obstacles. I would suggest having more zip ties on hand than were provided in the package. No issues with the 4-pole connector, I've had it attached to three different trailers and no problems. With other connectors I've had to mess with the pins to align properly, but not this one. Well done!




by:
2006 Jeep Commander

Product was a perfect fit for my nephews 2006 jeep commander., If you follow the instruction that were provided with the kit it is a very simple job even if you are not really a "car guy". The beauty with this harness is the simple "plug&play" and no need to cut into factory harness and has water tight almost factory like plugs.. I would recommend this harness even if you are going to have your mechanic install it he will Thank you.. Sincerely, Bill Jennings




by:
2007 Jeep Commander

I ordered a Hidden Hitch receiver and T-One wiring harness. Both were easy to install, good price, extremely fast shipping. The receiver was installed in less than 30 minutes, and the wiring harness in about 45 minutes. No problems, perfect fit.




by:
2010 Jeep Commander

I shopped the online auto parts stores and called the Jeep dealer for a custom trailer wiring harness for my 2010 Jeep Commander. I found that the parts were either universal or too expensive. etrailer.com had the right part at the right price.

I decided to tackle the harness installation after watching the video that was provided in an email from etrailer.com. Installation from start to finish took less than 20 minutes. I even impressed myself with the foolproof installation.

This is the 2nd time that I have ordered parts from etrailer.com and it will not be the last. I can always count on etrailer.com for quality parts at a great price. The customer service is not too shabby either.




by:
2007 Ford Flex

I purchased the complete kit for my 2007 Commander.The Hitch was a breeze to install.I picked up 12' of 3/8' heat resistant flex tubing to protect and organize the wiring and with some extra cable ties had the whole job done in under to two hours.Great product.The order was shipped and arrived in under three days.The Communication was first class.I would recommend e trailer if you want to save on installation and do it yourself.You get the peace of mind that the job was done well.




by:
Jeep Commander

If you think you can hand wire a Jeep Commander and make it work...stop thinking and buy this wire harness. I tried to splice and hand wire the Jeep with no success. The brakes run separately from the turn signals on a Jeep Commander, which is why you cannot splice in trailer wiring. Simply plug in the wiring harness and presto, it works. Thanks eTrailer for the great value on this product.




by:
2007 Jeep Commander

Easy as pie, installed and zip-tied in 30 minutes. Unit should come with more zip-ties, I used about 12 ( maybe a few overkill ).

One thing I did was remove one of the 13mm bolts from the spare tire carrier to route the driver to passenger cable behind the metal carrier ( which follows the already present wire harness ). This made the install a little cleaner.




by:
2007 Jeep Commander

Easy plug and go. Works great. I supplied extra zip ties and self tap screws.




by:
2006 Jeep Commander

Great product. The harness was exactly what the product description said it was. Installation was easy, everything plugged in to my Jeep's wiring harness, and the system now operates as designed.




by:
2007 Jeep Commander

The wiring kit was very good quality and fairly easy to install. The only issue I had was the wires feeding over to the passenger-side light was too short. Actually, if you stretched the wiring straight across back of bumper it did reach. However, if you wanted to do a better job and route with factory taillight wiring it would not reach. I finally decided to splice in a section of wire and do the job right.




by:

This hitch and wiring harness I purchased from etrailer was a breeze to install. It took me 30 minutes to do it by myself and only took that long because I had to slide in some shims on the hitch. Great product, great service. Thanks!!




by:
Jeep

Very nice plug and play setup here. Many folks with the Jeep SUV's using the dealer wiring package have to have the Jeep "flashed" by the dealer to get the lights to work post install.

This was super easy to plug in, lights work as they should, no visit to the dealer to get a "flash".

I think I spent more time zip tying the excess out of the way than the actual install.

This is a great product. Definitely recommend it.




by:
2008 Jeep Commander

Before installation I watched the video which was more informative that the directions. The harness is easily installed by unplugging and plugging. I installed this harness along with a hitch and the whole job took about an hour. Works great and had fast delivery.




by:
2007 Jeep Commander

The trailer hitch and wiring arrived as predicted. Instructions were perfectly clear. Installation was a snap. Very happy withe the online service and products.

Sincerely,

Gene




by:

Thank you for the prompt arrival of the wiring harness. Got it one day after I ordered it. It was easy to install and worked great. I was very pleased with your service. Rick G




by:
2009 Jeep Commander

Always the best service and support. No other place has the hands on videos like etrailer.com . I am a repeat customer 4X now and will continue to be a loyal customer of theirs. Don't splice into your nice vehicle! Do it right and you won't kill the resale.



25
114
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Trailer Wiring Harness for 2006 Jeep Commander
    Since your Commander didn't come from the factory with a 7-way trailer connector, you'll want to use the # 118408 that you referenced. If you click the provided link, you can see an install video showing the harness being installed on a 2006 Commander. If you don't already have a ball mount and trailer ball for your trailer, you can easily figure out the drop needed by looking at the FAQ article I've linked for you. The ball mount you choose will have the appropriate trailer balls listed...
    view full answer...
  • Is 4-Way Harness on 2006 Jeep Commander Compatible With Jet Ski Trailer Lights?
    The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118408 which fits your 2006 Jeep Commander will give you a 4-flat harness. A 4-way is a standard harness on trailers without brakes and it simply plugs into your Jeep's 4-way to power the trailer's lights.
    view full answer...
  • Troubleshooting Trailer Wiring on One Side of Trailer Not Functioning
    What you described sounds like a weak or bad ground on the right side of your trailer wiring. Each of the circuits on your trailer need to be grounded and the ground circuit on that side of the trailer is what all circuits you mentioned have in common. So try checking to make sure everything is grounding like it should. Sometimes lights ground through their hardware so if that's the case make sure they are connected to a clean metal surface. Or if the ground with a wire make sure it's connected...
    view full answer...
    Image 1 for
  • Trailer Hitch for a 2006 Jeep Commander Carrying a Motorcycle
    Your Commander may have a hitch rated heavy enough to carry your carrier. You will need to check your owner's manual or inside the driver's door jamb to get the weight ratings for your Jeep. Check the hitch itself and make sure the tongue weight rating is heavy enough. If you cannot find these ratings your dealer should be able to help you with that. The 75338 Class III receiver hitch you have selected is rated for 500 pounds tongue weight. When deciding if you can mount your motorcycle...
    view full answer...
  • Is There Bumper Trimming Involved to Install the Curt Hitch # 13414 on a 207 Jeep Commander
    To install the Curt Trailer Hitch # 13414 on your 2007 Jeep Commander you will not need to trim or cut any section of your bumper or add any trim bezels. I attached installation instructions for this product for you to check out also. You also would not need to reflash the PCM of your vehicle either once you installed a Tow Ready Custom Fit Vehicle Wiring # 118408. You would have to reflash the computer if you were trying to install the factory tow package wiring harness on your vehicle...
    view full answer...
  • Wire Harness Recommendation For 2006 Jeep Commander
    For a 2006 Jeep Commander with no 7-way connector, I recommend the Tow Ready Custom Fit Vehicle Wiring, part # 118408. This harness easily connects to the vehicle wiring and requires no cutting or splicing into the wires. I have attached a link to an installation video for this harness you can check out. When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
    view full answer...
  • Troubleshooting 4-Pole Wiring Harness on 2007 GMC Sierra
    One of the most common causes for a 4-pole wiring harness to have one function not operate (or to operate weakly) is a bad ground connection. Since this is easy to check I suggest that you make this your first troubleshooting step. Check that the harness white ground wire's ring terminal is firmly affixed to a clean bare metal spot on the vehicle. If there is corrosion on the surface, grease or a build-up of road grime then there may not be a good enough ground connection to support all...
    view full answer...
  • Are There Instructions Available for Installing Trailer Wiring Harness on 2008 Jeep Commander
    Yes, I have linked instructions for the item you selected, Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, part # 119147KIT. That being said, I'd recommend going with the # 118408 vehicle specific harness instead. This harness would require no cutting or splicing to install, which would be much easier and faster. You can see an install video and the installation instructions by clicking the provided links.
    view full answer...
  • Trailer Running Lights Not Working with Wiring Harness 118422 on a 2008 Jeep Commander
    Since the lights on the trailer work on a different tow vehicle, we can eliminate the trailer as the problem and focus on the wiring harness and the 2008 Jeep Commander. The running light wire on the harness is the brown wire. It is on the same side as the yellow wire which should be on the driver side of the vehicle. You can test the wiring harness using a circuit tester like # PTW2993. Do this test without the trailer connected. Turn on the running lights on the vehicle and use the circuit...
    view full answer...
  • Does Installation of a Class III Hitch on 2007 Jeep Commander Require Cutting the Bumper
    We do offer two different Class III hitches for your 2007 Jeep Commander and both can be seen on the link provided, including the Draw-Tite # 75338 that you referenced. I reviewed the installation instructions for this hitch (they are attached for your reference along with a video) and there is no mention made of any trimming of the bumper fascia. The same applies to the other two hitches offered. If you will be towing you might consider the etrailer ball mount kit # 989900 which includes...
    view full answer...
  • Trailer Wiring Harness for a 2007 Jeep Commander
    If your 2007 Jeep Commander came with the factory tow package then it should have a factory 7-Way trailer connector at the back of the vehicle. You would follow this connector back to where it plugs in and that is where you would install # 118381. If there is no trailer connector on your Commander then # 118381 will not work. You would need to use # 118408 instead. I have linked the instructions and a video showing installation for you. Neither harness plugs into the back up sensor connector. I...
    view full answer...
  • Towing Capacity for 2006 Jeep Commander V6
    I looked up the towing capacity for your 2006 Jeep Commander with a V6 and it's 3,500 lbs without any additional components installed. If you need a hitch installed as well we have the Draw Tite part # 75338 which has more than enough capacity. For trailer wiring the part # 118408 will give you the easiest to install and most reliable kit. Since you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch...
    view full answer...
  • Recommended Trailer Wiring and Hitch for 2007 Jeep Commander Sport Rocky Mountain Edition
    The Tekonsha T-One Vehicle Wiring Harness # 118408 referenced in your question is confirmed to fit your 2007 Jeep Commander Sport Rocky Mountain Edition. There is not a fit exclusion with this particular trim package. The harness will work perfectly. It will install by plugging into factory ports behind the driver and passenger side tail lights to provide you with a 4-Way connector to power a trailer's basic signal lights. I have attached an installation video that you can use for reference. If...
    view full answer...
  • Installation of Draw-Tite Trailer Hitch 75338 on a 2006 Jeep Commander
    You can find the torque requirements for Draw-Tite trailer hitch # 75338 in the instructions which I have linked below for you. We do not post them in case the manufacturer changes them. The instructions link though will always have the most up-to-date specs. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,...
    view full answer...
  • Parts Needed to Tow Trailer With 2006 Jeep Commander
    We have everything you'll need to tow a trailer with your 2006 Jeep Commander. First thing you'll need is a trailer hitch which for that the Curt # 13414 is the way to go. it has plenty of towing capacity, the highest quality powder coat finish to resist rust, and installs very easily. I attached an install video for this for you to check out as well. For trailer wiring then you'd want the part # 118408 which installs easily and is also very reliable. I attached an install video for this...
    view full answer...
  • Correct Curt Trailer Hitch Receiver for a 2007 Jeep Commander
    The Curt Trailer Hitch Receiver part # 13414 is indeed a fit for a 2007 Jeep Commander and it's available for purchase. It offers easy bolt-on installation and it has a hidden designed for the best overall look. I have attached an install video for you below as well. It should only take around thirty minutes. If you will be towing then you'll also need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118408 which is plug-in-play and the etrailer Ball Mount Kit...
    view full answer...
  • Brake Controller and Trailer Wiring Installation On a 2007 Jeep Commander
    Yes, you can install the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, on your Commander as long as you install a 4-Way trailer connector first. The 4-Way wiring harness for your 2007 Commander is the T-One Vehicle Wiring Harness, item # 118408, and will be installed inline with the vehicles taillight connectors. Once you have the 4-way connector installed you will need to wire a brake controller, I would recommend the Prodigy, item # 90885, and the # ETBC7 kit. The blue wire...
    view full answer...
  • Trailer Turn Signals Not Working with # 118408 Wiring Harness Installed on a 2008 Jeep Commander
    It sounds like you have one of two problems. First, I would check the wiring harness at the back of the vehicle. Disconnect the trailer and make sure the ground wire is connected to a clean, rust, paint and corrosion free ground location. Then using a circuit tester, item # PTW2993 if needed, test the wires going into the converter. The red wire should have the brake signal on it, the green wire should have the right turn signal on it, the yellow wire should have the left turn signal on...
    view full answer...
  • Brake Controller Wiring on a 2008 Jeep Commander
    A brake controller will have no effect on your vehicle's Electronic Sway Control and the Electronic Stability Program. Any brake controller will work with your vehicle and will need to be hardwired in to the existing wiring on the vehicle. If your vehicle does not already have a 4-pole wiring harness located a the back of your vehicle, you would need to purchase the following parts: A T-Connector part number 118408, a Brake Controller Installation Kit, part number ETBC7, and a brake controller....
    view full answer...
  • Trailer Wiring and Brake Controller Recommendation for a 2006 Jeep Commander
    I did some research on your 2006 Jeep Commander and it looks like when properly equipped it has a towing capacity of 6,500 lbs. So you should be just fine. You will want to consult your owners manual though just to be certain though. If you do not have trailer wiring on the vehicle you would need the part # 118408 to provide a 4-way. If the trailer has brakes then you would want to install a brake controller to allow you to actuate them and assist in the braking of the set up. From there...
    view full answer...
  • Brake Controller and Install Recommendation for a 2008 Jeep Commander
    For a 2008 Jeep Commander that did not come with a factory installed 7-Way trailer connector, you will need a few items to install a trailer brake controller, but there isn't a plug in adapter available for your vehicle. First, if your Commander does not already have a 4-Way, you will start by installing one using # 118408. I have included a video showing a typical installation for you. Then you would need a 4 and 7-Way installation kit # ETBC7. This will provide the 7-Way and the wiring...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Jeep Commander Rocky Mountain Edition
    Draw-Tite trailer hitch # 75338 is listed as a fit for all styles of the 2008 Jeep Commander so that would include the Rocky Mountain Edition. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2007 Jeep Commander Rocky Mountain Edition
    Yes, Draw-Tite trailer hitch # 36362 as well as the 2 inch Class III version # 75338 will fit the 2007 Jeep Commander Rock Mountain Edition. We have someone here who owns one and the hitches fit it just fine. Since you are looking at the Class III hitch I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip,...
    view full answer...
  • Trailer Wiring Harness for a 2008 Jeep Commander
    You will have to convert the separate circuits on the vehicle to be able to work with the combined circuits on the trailer. On the trailer, the left and right turn signals also have the brake light functions. Many vehicles have separate amber turn signals so a converter is required to combine the circuits. There are harnesses for your 2008 Jeep Commander that do not require any hardwiring, such as # 118408. But if you prefer to hardwire in a converter you can use # 119178KIT. On 119178KIT...
    view full answer...


< Previous
12



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Matthew S
Test Fit:
Matthew S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.