SeaSucker Paper Towel Holder - Vacuum Mount - Black

Video Transcript for Review of SeaSucker Boat Accessories - Accessory Mounts - SEA95ER

Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the SeaSucker Vacuum Mount Paper Towel Holder in the black color. Now, whether you're camping or boating, you might get tired of your paper towels just rolling around or laying around and cluttering up your boat or your camper. Now you can mount that paper towel roll on a nice solid surface using this handy vacuum cup-mounted holder. This will mount to most non-porous surfaces, like glass, fiberglass, metal, or plastic surfaces using this 4-1/2-inch diameter vacuum cup.

It will attach or remove in seconds, and it offers a pull rating of about 120 pounds so it will hold everything in place. And I did wanna demonstrate how this would work. I happen to have a piece of fiberglass I put down here. My table wasn't non-porous, so I put this piece of fiberglass just to share how this vacuum mount would work. It comes with this nice protective cover to protect the vacuum mount from any damage.

So if we remove that, so when you go to attach this, you'll just put a little pressure down on it, and as you're putting pressure down, you start pumping this plunger. And as you're pumping that, it'll start forming a suction. And if you'll notice, that orange stripe that's on the plunger disappears. When that's disappeared, you can see that it's attached permanently. Pretty good, like I said, a pull rating of 120 pounds.

And then you can attach your paper towels to it. And then if you need to move it to a different location, there's these tabs one right here and one back here, all you have to do is raise up on that tab and release that pressure, just like that. And you can remove it, simply just like that. And then you can attach it wherever else you need it. Now what's nice about this, if you notice on the ends here, it has these adjustable elastic cables on each end that hold this bar in place.

So when you put your paper towels on there, it's gonna hold the paper towel roll snug. And if you need to loosen it, you just adjust it right here. I'm gonna show you that. So right here on this end, you can see there's a hook in, just unhook the elastic strap, open that all the way. I have a small roll of paper towels here. So you can just, what you'll do is go ahead and insert it into there, drop it into there, then hook it onto your, just like that. And if you'll notice, it's holding your paper towels in place. And as we mentioned, now if go to pull on it, it's pretty tight 'cause it's holding it snug. So to adjust it, all you have to do is push in, just to release a little bit, and do the same over here. Push in on the, and that'll release that. And now you'll see that you're able to pull out as many towels as you need. So you can adjust it however snug you want it to hold it into place. And then to remove it again, just unhook it like that, raise that up, remove your paper towels, and you're ready to go. Put it back into place. And again, you can just slide it back up in there to snug it up if you want. Now, this part is made in the USA. A few dimensions on this. The overall length one end to the other is 14 inches. The height on it, overall height is gonna be from here to here about 5-1/2 inches tall. And the depth from here to here is gonna be about six inches deep. It is a black plastic construction. Now, we do also offer this available in a white color, and that's sold separately. It's a part number SEA35ER. So what we'll do, since it's not being used, you'll just go ahead and take your protective cover and just snap it over the vacuum cup mount to keep that from getting damaged or cut or torn or anything. And now you're ready to go. But that's gonna do it for our look at the SeaSucker Vacuum Mount Paper Towel Holder in the black color.