Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When winterizing your RV, don't waste antifreeze by letting it fill up your RV's water heater tank. Instead, use this permanent bypass kit to keep the antifreeze in your RV's water lines. Valves allow fast, easy activation every winter.
Features:
Specs:
When winterizing your RV, the antifreeze you pump through your RV's water lines might not be going where it needs to go. Without a bypass, up to 6 gallons of antifreeze can be wasted by collecting in your RV's water heater tank instead of moving throughout your pipes. Use this bypass kit to keep antifreeze out of your tank and inside your water lines.
This kit permanently connects to your RV's water heater tank. Install the 2 bypass valves onto your tank and connect them with the included hose. When you're ready to put your RV into storage, turn the valves to block antifreeze from entering your tank. Then you can pump antifreeze through your water lines without having to worry about it collecting in the water heater tank.
When spring rolls around and you're ready to take your RV out of storage, re-adjust the valves and flush your water lines with clean water.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at the Valterra RV Water Heater Bypass Kit for six-gallon water heaters.Now, when bypassing the water heater, when winterizing your unit, will save at least six gallons of antifreeze each year. Installation of this kit requires good access to the rear of the water heater. It's a simple two-valve operation. These are made from a durable brass construction, and they provide nice, easy control and operation. It is a permanent installation, and it's a lead-free design.It comes with two valves, comes with the hose, and it comes with some thread-wrap tape. Now this hose from connector to connector measures about seven inches long.
Installation instructions are located on the back of the package. If your water heater is supplied with connection nipples, then you can reuse those when installing this kit.Basically, what you'll need to do is remove the hot and cold water lines from the water heater. This is going to connect to the hot and cold water line connections on the heater, on the water heater. Then, the hose connects the two valves, and then the hot and cold water lines that you disconnected originally, connect into the valves. Then, you can control water flow with each valve.
That's all there is to it.That's going to do it for today's look at the Valterra RV Water Heater Bypass Kit for six-gallon water heaters.
Ratings & Reviews
Sierra K.
10/22/2021
That seems probable. Unfortunately, this is the shortest hose kit we have.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim W.
5/17/2020
Perfectly