Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug

by: Mario M08/17/2017

2013 Chevrolet Silverado

The wire harness allows me to use to split my Trailer plug in for either my 5th Wheel Trailer or my Tow behind Cargo Trailer. It was very simple to install only took about 30 minutes. I would recommend this item to anyone who needs to split their Trailer Plug. 421778

No instructions came with this wiring kit. I find it ridiculous that universal color codes do not apply to this kit! I blew a fuse right off the bat using the colors as they apply to almost all vehicle manufacturers. The wire colors were the same, however the placement in the plug that is pre-wired is not correct. If this is a standard policy, it would have been nice to have an instruction sheet stating that. My choice was to either correctly place and change the pre-wired plugs, or make the other end match the incorrectly color coded plugs. 634387

There is more than one accepted convention for color coding a 7-way trailer connector, which is why we list both by wire color AND wire function. This can be seen higher up on this page in the product description.

-- Mike L - 04/24/2019

by: Richard11/20/2017

The directions were a little confusing. The direction had the wire colors a little mixed up. Someone needs to experiment with the equipment to straiten out the colors and which light they belong to. The product works great. It makes me feel safer!! 453703

The Pollak Custom Fit Vehicle Wiring product has worked great. I havent had any problems with it at all.

Richard - 11/24/2018

I bought the Pollak PK11893-11932 wire harness to install in my 2013 Ford F350 King Ranch pickup. I watched the video both on youtube and on e-Trailer's site and the install went exactly as described. One item of interest, I unbolted the bracket that supports the OEM trailer connection at the rear of the truck because I found this easier than trying to pry the connections apart while the bracket was still on the truck. Two bolts and it came right off and allowed me to see the top side of the OEM connector for easier separation of the Ford wire harness. Other than that, it went as smooth as silk. Total time to complete the job, about 45 minutes. This is a great product. I would highly recommend this for any 5th wheel towing vehicle. It makes the whole appearance of your truck and 5th wheel look neater, instead of having the 5th wheel cable hanging over the tailgate. Very nice. Thanks Pollak and e-Trailer. 88852

Thanks for the follow up Patrick. I love the Y connector. I installed it in my 2013 F-350 King Ranch, for the 5th wheel I tow and it makes the whole connection neat and clean. No wires hanging over the tail gate. The install was a breeze. I was somewhat apprehensive about drilling a 2 hole in the wall of my brand new truck, but Etrailers product installation instructions relieved my anxiety. I appreciate the attention to detail that obviously went into the design of this product. Once again thanks for the follow up.

Lou A - 01/09/2015

The Pollak 5th Wheel T-Connector w/7 Pole, is a great product. The hardest part of the installation on my 2014 Ford F-250 truck was cutting the hole in the box, need a drill that has power. I used a half inch electric drill. The Pollak connector plugged into the Ford factory electrical connections with ease. This T-Connector was just what I was looking for. I pull a 32' 5th Wheel Camper, the camper cord plugs into the Pollak connector with no issues. Thanks! 148953

Click to Enlarge

Click to Enlarge

I have had no issues with the Pollak Custom Vehicle Wiring for my Camper that I installed on my 2014 Ford F-250 Truck, it is functioning as it should. Thanks for making a great product.

Preston S - 08/31/2015

First of all what I like about this product...it does what it's supposed to do. That is, to tap into the OEM wiring harness and provide a trailer wiring plug in the truck bed for a gooseneck trailer. What I don't like had entirely to do with installation. There were no instructions...none. Not even a diagram showing which wires go in which holes. The plug was marked with what the wires do but not the color. I know what colors are generally used for what task on trailer wiring, but does the manufacturer? It turns out they do but I had to stop in the middle of the installation, go into the house, turn on the computer and watch the install video. Not the end of the world, but a PITA none-the-less. My other major issue was with the install screws provided. These are the cheapest POS, made in china screws they could find. They were also slotted head screws. Come on...really?!?! Slotted head screws!?!?! Really?!?! On top of that these screws weren't self-tapping, like you think would be used on the INSIDE of the truck bed, they had a nut on the back side which a person would supposedly snake on, somehow, in the blind space between the inner and outer walls of the truck bed. Since I didn't have a helper, nor 7' long arms, I dug through my screw stash and found the exact self-drilling, self-tapping screws that Pollack should have provided. I actually would have preferred they provide no install screws at all. I don't know which is sillier. That Pollack won't spend a nickel more for the screws that they should provide, or that it annoys me so much. For a nickel work of screws, and a single picture or diagram showing which wire goes into what hole, I would have given Pollack an excellent rating. Pollack would do well to take some customer satisfaction classes. Perhaps they could look to B & W or etrailer for that. 172730

This product works great. The plug that was in my bed had been mostly wired by the previous owner, and his wiring job left something to be desired. I needed to replace the factory wiring to my plug on my bumper, and I just didn't like the thought of splicing wires on my brand new harness to make my plug in my bed functional again. I found this product, and it gave me exactly what I was looking for- a solution that required no splicing of my new harness and a good, solid wiring job to my plug. I want to do it right the first time and know that it is going to work when I need it. From reserch that I have done, I found that Pollak was the OEM supplier of the wiring harness on my F-250, so you know you are getting factory quality with this product. The installation is pretty straight forward, but it can't hurt to watch the video on this product. It took me some time to modify the existing hole in my bed so this plug would fit, but that was the hardest part of the installation. Just make sure you pick a spot that has enough area for the wiring and the back of the plug to fit before you go cutting holes. The hardware kit that comes with the product didn't really help me out, but I didn't see where it was advertised that it comes with hardware, so I can't knock them for that. Two final, but important pieces of advice I would like to share: Make sure you run your wiring to the location of the plug BEFORE you put the wires into the socket. I didn't think about this, but luckily, the plug barely fit where I needed it to go. Also, make sure you connect the wires correctly before pushing the blue piece into place. There is another plug just like it on the other end of the wire. Use it as a template and double check....no triple check your connections. Like I said earlier, this plug does exactly what I wanted it to do. I now have a factory quality connection with correctly sized wires to my plug in my bed. Plus, buying this option is cheaper than many other ones and allows you to run wires into tight places that similar products may not...not knocking other products, I just see that as a positive feature of this one. I hope this helps! 70155

Wiring harness came quickly and was exactly as described. Super simple installation. Drill your hole in your truck bed where you want your 5th wheel plug to be. I used a 2.5” hole saw. Follow the color coordinated drawing to install the wires in your new plug. Just unplug your existing factory 7way plug, feed the wiring down through your new hole, use 4 metal screws to secure your new plug in your bed. Now go underneath, route your new harness and zip tie out of the way. Plug in the new harness to your oem factory 7 way plug, then use the remaining plug to plug back into your 7 way plug mounted to the truck on or under the bumper if you plan on using that plug again. I wanted to as I have a four way on my bumper as well. Fast and easy, no sweat. 542064

Click to Enlarge

Click to Enlarge

The hitch was very well made and easy to install. I'm very happy with the purchase. I would recommend this 5th wheel hitch to anyone needing one. It even came with the grease for the ball. 718901

this was a very good purchase for me. It wasa time saver as I am leaving tomorrow to go camping so the quick delivery and the ease of installation made this the right choice, 718377

Everything was received in good condition, no parts were missing, easy to do business over the phone, I have used etrailer for most of my personal trailer and towing needs and have never had a problem either by phone or website. 692139

Easy to install 691070

This is a great fit on my 2018 ram 2500. Easy to install and makes a neat install and water tight connection. Would highly recommend this product to anyone. 679851

Product arrived without a wiring diagram or instructions to install it. Luckily there was an installation video and diagram on the website. etrailer to the rescue again! Wish they made this in a 5ft harness. 677798

Very complete kit. 666911

Have purchased this product for other trucks and they have worked perfectly. Have not had an opportunity to install it yet so no pictures. 657916

I had wanted to add a plug to the bed for sometime but never got around to it. Finally got this kit and it was simple to install. etrailer had the pinout on the website for our truck and an install video to watch if needed. The hardest thing you have to do is drill into the bed. 652147

Nice product, well designed, perfect for setting up a bumper mount 7 pin adapter and a gooseneck adapter in the truck bed. Plugs right into the existing Ford harness. Couldn't be easier. 639603

Great product! Easy simple install! 637569

quick shipping and everything as noted. 614671

It makes for very clean install. 612636

This plugged right into my 2005 super duty and works great. Really easy install. 576461

Super easy install. it took me 20 min to get it installed and secure all of my wiring. 561794

Very good 556438

Recently purchased this whip for my truck. Very simple install. Start to finish I was 15 minutes. I recommend watching the install video before attempting the install. 549556

Still using the connection and it works as it should. Has been a good investment.

Jon S - 08/03/2019

by: Jace07/18/2018

2006 Ford F-250 and F-350 Super Duty

Great product easy install after one year no issues 542980

Great product, easy to install. I would recommend getting some dielectric grease with your order. 542125

I only can give the product 1-star, and here's why: "The instructions you requested are not currently available from the manufacturer". We apologize for any inconvenience. …………… Wonderful! 520097

Service was excellent, fast delivery. Only gave 4 stars because the were no instructions included. Wasn’t a huge deal for me but others with no experience would benefit. 519142

Easy to install. Worked with 2016 Chevy Silverado 3500. 519125

I purchased a Pollak 5th Wheel/Gooseneck T-Connector with 7-pole Part# PK11893-11932 and received item promptly. The wiring harness was easy to install and the install was virtually self-explanatory-(if you have some mechanical/electrical experience). I am pleased with the product as I have used Pollak products in the past and was familiar with the quality associated with the name. I am also pleased with the entire experience of doing business with etrailer and will use them again. I appreciate their variety of products to assist in most any trailer repair, hook-up or axle modifications. 500642

We received this product and one of the pieces wasn't included it only took me one phone call and the customer service was very helpful in getting the problem corrected and sending out the missing part. Would highly recommend this vendor. 496568

No instructions and no mounting hardwar e. 490425

by: Dan02/13/2018

Exactly what I needed. Very clean way to access wiring harness. 475394

by: Chuck02/03/2018

This product made adding a remote trailer plug quick and easy. It make hooking up so much nicer than running the cord over the tail gate. 472516

by: Shane01/21/2018

Installation was easy. Need several long zip ties to make everything look good. 468558

by: John01/16/2018

No problem with product so far. Not even a hiccup. Easy install with instructions. 467677

by: Mark01/09/2018

It installed easily, and has performed as expected. The shipping was timely as well. 465857

Great product and very easy to install! Would purchase again. 454999

by: Paul11/14/2017

Worked great, just as I had hoped and e xpected Thx 451818

Better quality than expected. Perfect fit, easy install. 450002

Install was much easier than expected. Looks to be a well made piece. No problems, perfect fit. 450001

Easy installation. 442820

by: Bobby09/11/2017

Easy to install, works great. 431340

With just pigtail connections it was just a small hole I needed to cut on the interior sidewall. Fished it with a coat hanger. Mounted reciprocal in factory plastic toolbox on our 2017 Titan XD. Easy installation. 425507

by: Ajanderson00708/26/2017

2016 Ford F-250 Super Duty

The wiring harness was easy to install and works great. Only issue I had installing it on a 2016 F250 was the depth of the harness. The back end is kinda crushed in rubbing on the backside of the skin on the truck. I put some anti-chafe tape down and its fine but an angled down harness at the end would have been a better fit. 425410

by: Mike M08/20/2017

2009 Ford F-250 and F-350 Super Duty

Ordered a 5th wheel/ Gooseneck T-connector Order came fast and exactly what I needed. Great instructions for install and has been working 100% Price was unbeatable I will definitely shop here again. Mike 422934

Still working 100 Thanks for the great product

mike m - 08/20/2018

I received my B&W turnover ball hitch and Pollack 7 pole electrical harness. I have not had them installed as of yet. I will come back and do another review onc installed. 419589

by: Jeremy C.08/07/2017

2006 Ford F-250 and F-350 Super Duty

Shipped with my other order on time and as expected. Installed easily, though I would add that I remember discovering that the wiring schematic was insufficient. I was able to overcome this obstacle with a search online that worked great. That was the only hiccup in the whole operation and I love having the trailer wiring harness tucked away neatly in the corner of the bed away from mischief with a professionally installed appearance. 417083

by: Tim07/26/2017

Dodge Ram Pickup

Fits nicely for my Ram 3500. It was exavtly what i was looking for. Installation was fairly easy. I would recommend this. 410889