Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The composite master cylinder is built from glass-reinforced nylon that resists rust and corrosion, so it stays smooth and reliable even after long exposure to the elements. The large reservoir holds more brake fluid, which cuts down on maintenance and helps keep your system ready for the next haul. An automotive-style diaphragm cap seals the system completely to help prevent fluid contamination.
The built-in 8" channel gives you three mounting positions, so you can set your coupler (sold separately) right where it needs to be for level towing. The channel-down design offers extra drop, which helps line up taller trailers with the tow vehicle’s hitch. It’s a simple way to dial in your setup without extra parts or adapters.
This actuator uses heavy-duty steel construction with a primed finish that’s ready for paint or top-coat protection. The weld-on design makes it a solid choice for custom or replacement builds where you want control over fit and finish. Once welded in place, it’s sturdy and ready for work.
The hydraulic surge design automatically applies your trailer’s drum brakes when the tow vehicle slows down. As the actuator telescopes in and out, an acetal copolymer lining keeps movement smooth and predictable. That means steady braking performance with less jerk or grab when stopping heavy loads up to 12,500 lbs gross towing weight and 1,250 lbs tongue weight.
A built-in breakaway feature helps stop your trailer if it disconnects unexpectedly. It’s part of the actuator housing, so there are no add-on pieces to manage. It works quietly in the background but gives peace of mind every time you hook up and head out.
Because this actuator does not include a reverse lockout, it is recommended that you equip your trailer with free-backing brakes so that you can drive in reverse without the actuator triggering your trailer's brakes.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Demco eight-inch adjustable channel down hydraulic drum brake actuator with a 12,500 pound gross towing weight capacity and a primed finish. Now this hydraulic actuator will activate your trailer's brakes when your tow vehicle slows or stops. Basically what happens is when you apply the brakes in the tow vehicle, deceleration occurs and the momentum will push your trailer toward the rear of your vehicle. And with a surge brake system the actuator is triggered as your trailer moves forward once your tow vehicle starts to slow down.
And when this happens, the inner slide portion of this actuator will contract, applies force to the master cylinder in the back here, and this in turn supplies the necessary hydraulic pressure to engage your trailer's brakes and stop the trailer. This one here uses an acetal copolymer lining between the inner slide tube and the outer case. Provides a nice smooth operation as that actuator telescopes in and out. This one has an adjustable channel. You can see it has three different positions for mounting your coupler.
Now the coupler is not included. We do sell those separate at our website. And if you notice, we mentioned this one is a channel-down design, so it allows for a greater drop. Works great on tall trailers. The channel height on this is gonna be right at eight inches.
The width, which will be measured inside the inside, right at three inches. This is a heavy duty steel construction. Has a nice primed finish to it. The master cylinder in the back here we mentioned. It is a composite master cylinder, which is durable and efficient.
It's a glass-reinforced nylon construction, which will resist rust and corrosion. And it does have a large reservoir, which will provide increased capacity for the brake fluid. Up at the top right here where you put your fluid in you can see it uses an automotive-style diaphragm cap creates a completely enclosed system. Helps prevent contamination of your brake fluid. Right here it does include the breakaway cable with the hook on it. Now the breakaway cable is required by law because it will prevent a trailer runaway situation. So basically when you hook your trailer up to your tow vehicle you'll take this breakaway cable with the hook and the keeper on it and hook this to your tow vehicle also. And then what would happen if by chance this would come disconnected from your tow vehicle, it would pull on this cable, which would activate that lever, which would then supply the necessary pressure in the master cylinder to engage the trailer brakes and stop that trailer in a runaway situation. So, as we mentioned, this is included and it is required by law. This is a weld-on installation. It mounts to a straight three-inch wide trailer tongue. It is made in the USA. Application: This is for trailers with hydraulic drum brakes. Gross towing weight capacity is 12,500 pounds. Maximum tongue weight, 1,250 pounds. This does go by the model number DA10. And one last note I do wanna mention is because this actuator does not have a reverse lockout solenoid on it, it is recommended that you equip the trailer with either the reverse lockout solenoid that would screw right into the master cylinder here or to have free backing brakes on your trailer so that you can drive in reverse without the actuator triggering your trailer's brakes. But that should do it for the review on this Demco eight-inch adjustable channel-down hydraulic drum brake actuator with the 12,500 pound gross towing weight capacity.
Ratings & Reviews

Jeff M.
9/3/2025
No problems works as it should

Victoria H.
11/19/2024
Hi Holger, this should've been packaged better. Let me make this right for you.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Michael
11/18/2023
This was a exact replacement from a worn out one I have on my 3-ton dump trailer . No problems at this point . Your directions on how to install was very clear in how to reinstall in welding & connections for proper brake slowing .