bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 6000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2003 Chevrolet Tracker
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C45CR
In Stock
$278.46
Retail:$448.95
You Save: $170.49
Trailer Hitch
Not Confirmed to Fit

2003 Chevrolet Tracker

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C45CR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (210)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C45CR

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 6,000 lbs (GTW): Handles campers, boats, or small trailers with Class III strength
  • Holds up to 900 lbs (TW): Supports heavy cargo carriers or multi-bike racks securely
  • Bolt-On Installation: Mounts to the frame with included hardware—no drilling or welding needed
  • Durable Powder Coat Finish: Gloss black coating over a protective base resists rust and wear
  • Open-Back 2" Receiver: Easy to clean and ready for standard towing and hitch-mounted gear
Made in USA

Features to know about

Built Strong for Everyday Towing and Hauling: Class III, 2" Hitch Receiver

This Curt Trailer Hitch Receiver is made for real-world work. With a 6,000 lb maximum gross trailer weight and 900 lb tongue weight, it’s tough enough for small campers, boats, or cargo trailers. When used with a weight distribution system, capacity jumps to 8,000 lbs GTW and 900 lbs TW. The fully welded steel construction and precision robotic welding give it the strength and reliability that frequent haulers depend on.

Corrosion-Resistant Finish That Lasts: Gloss Black Powder Coat over Protective Base Coat

You won’t have to worry about rust taking hold after a few wet seasons. The hitch is coated inside and out with a protective liquid Bonderite layer and finished with a high-gloss black powder coat. This dual-layer finish adds long-term durability and keeps the hitch looking sharp even after regular use.

Install It Yourself Without Welding: Custom Fit, Bolt-On Design

This hitch bolts directly to the frame—no drilling or welding required—so it’s doable in a home garage with basic tools. The mounting hardware is included, and the open-back receiver design makes cleaning simple after installation. It’s tested to meet SAE J684 safety standards and built with exact fitment in mind for proper alignment.

Ready for the Gear You Already Have: Standard 2" Receiver Opening

The 2" x 2" receiver opening works with most common towing and accessory gear. Whether you’re using a ball mount, bike rack, or cargo carrier, your equipment slides right in without extra adapters. It’s that versatile setup that lets you switch from hauling gear to towing without missing a beat.

Specs

Receiver Dimensions

  • Receiver opening: 2" x 2"

Class and Rating

  • Rating: Class III

Weight Capacities

  • Maximum gross trailer weight (GTW): 6,000 lbs
  • Maximum GTW when used with weight distribution: 8,000 lbs
  • Maximum tongue weight (TW): 900 lbs
  • Maximum TW when used with weight distribution: 900 lbs

Warranty

  • Limited lifetime warranty

13460 Curt Class 3 Trailer Hitch Receiver

Similar to Draw-Tite DT65MR

Installation Details C45CR Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.8

210 reviews
5 Stars
(187)
4 Stars
(14)
3 Stars
(4)
2 Stars
(1)
1 Star
(4)
Review Sort Icon
by:
Easy to install and tows without any issues. I have a few pics of us towing a 12’ trailer with 3 heaping scoops of mulch.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

5/6/2025

Those are some heaping scoops, Matthew! Even looks like you got a little helper too.

Matthew profile picture

Matthew

5/4/2026

Still as good as ever! We use it pretty often.

by:
2020 Toyota Highlander
I have always bought Curt hitches for their quality and installation ease. I was happy with Curt again.
Kate F. profile picture
Etrailer Expert

Kate F.

8/10/2026

It is nice to find a manufacturer that we can always rely on Eric! What do you mainly use your hitch for?

by:
Product was as advertised. Directions were clear and concise. Time frame to get the job done was right on the mark. I was pleasantly surprised the whole project went without a hitch. Oh wait a minute, there was one hitch. The one I install without a glitch!~)
Richard profile picture

Richard

7/26/2025

Great! Love it!

by:
Very easy straight forward install after watching install video.
by:
Installation was not exactly easy but it was consistent with the instructions I received. Very happy with it, perfect fit!
by:
2024 Toyota Highlander
Great hitch and fit perfectly. It came in an unbroken box (I’ve seen some people complain their box was broken) with no scratches or issues. The holes and hitch lined up perfectly. The video is a great reference, so keep it handy while you’re installing it. I had to use the Chat on the etrailer website to find torque specs because it wasn’t in the instructions. Other than that, no issues. I tried installing without dropping the muffler, not possible, at least for me it wasn’t. But with an extra hand it popped out of the hanger pretty easily. The video said the instructions came with a guide for the panel to cut, but mine didn’t have that. I just watched the video and made my own mark and cut. I did cut less than what the video showed to keep the panel closer to the hitch for a cleaner look, but that took a few shaving cuts to get it right. Overall, very pleased with it.
by:
This is a great heavy duty trailer and especially like that it doesn't extend past the bumper! The video install and paper instructions were very helpful and accurate especially where to trim the splash guard . I used a floor jack to position hitch in place as I didn't have a helper. I highly recommended.
by:
toyota Highlander
The installation instructions were spot on! I do have a suggestion for the installation instructions. In my case,(I have a 2022 Toyota Highlander XLE), I found that simply unbolting the rubber muffler hanger bracket and removing it was far easier and quicker than trying to pry the muffler hanger out of the rubber part of the bracket. It was a breeze to remove it and replace it after installing the hitch.
by:
2024 Toyota Highlander
Able to install hitch solo, it fit perfectly. Wiring kit took more time than the hitch to install.
by:
2021 Toyota Highlander
The shipping box was ripped open but the only damage was a scrapped decal. All of the hardware and installation instructions were securely taped to the hitch
by:
2020 Toyota Highlander
Weather finally allowed me to install. Fit was perfect. Used pair of ramps as props with a hydraulic jack to then lift the final foot and get the first bolt in. I kept the fascia and just cut out the parts that would not fit.
by:
Works as intended, straight forward installation
by:
2023 Toyota Highlander
Perfect fit! Pretty easy installation but definitely need a second person to help hold it up until you get a bolt in each side. Love the “hidden” look! Completely flush with the bumper means no hitting your shins!! Highly recommend
by:
Easy to order for specific vehicle, good instructions and easy to install. I come back here for my trailer needs
by:
We had a mechanic install our hitch, it looks very nice and arrived in a very timely manner, keep up the good work
by:
This is an extremely durable and heavy duty trailer hitch. It fit perfectly on my 2022 Toyota Highlander Hybrid Limited. The foot kick sensor still works just fine for the hands free liftgate. I just kick under the new hitch bar and point my toes up around the back and it works every time. I installed it myself. Tightened it with my socket wrench and went to an auto parts store to rent a torque wrench to tighten it up the rest of the way. I don't own one and didn't want to buy one just for six bolts. I trimmed a little bit of the plastic underbody panel with an oscillating trimmer tool, not the entire suggested piece in the instructions. Only what needed to be removed for the driver's side of the new hitch plate that is exposed.
by:
Very satisfied with the order, delivery and installation instructions. All good.
by:
2023 Toyota Highlander
so easy to order, they are always in contact with you until you get your order, even if you're like me and never respond to those. They still email and check to make sure you're happy. Oh, it's a person who emails you. Or is it AI. never mind. anyway, they are good
Joseph profile picture

Joseph

5/22/2026

Great

by:
2024 Toyota Highlander
I'm pleased with my trailer hitch, I hope that it will give longevity service.
by:
My husband is struggling to install. It doesn’t match up. Need to know if you have an installer in the area we can call
by:
2022 Toyota Highlander
A one person installation! With the online installation video in hand I was able to install the hitch and light wiring in 1.5 hrs. The hitch bolted up easily and the T light wiring kit was as simple as the online video explained. Best of all, this hitch looks good.
by:
2022 Toyota Highlander
In my opinion- C45CR best and strongest Trailer Hitch for the price on the market.
Good Quality and easy to install.
by:
Have not installed it yet. Hitch came unscathed so was very pleased. Anxious to install it looks pretty straightforward. I’ve bought a few things from etrailer and always been happy and Will was very patient and helpful.
by:
toyota Highlander
This curt trailer hitch is very sturdy. It bolts onto my 2022 Toyota Highlander without any issues. I highly recommend this tow hitch for anyone who wants to tow utility trailers or smaller boats and campers.
by:
Great product. Excellent instructions.
T
he person taking the order was very good.
Keep up the good work.
Bob
Bob profile picture

Bob

10/12/2025

Ver good

25
210
true
Show More Reviews

See what our Experts say about this CURT Trailer Hitch


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Kristina F
Written by:
Kristina F
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B
Employee Scott A
Test Fit:
Scott A
Employee Daniel M
Test Fit:
Daniel M
Employee Rick G
Video by:
Rick G
Employee Daniel D
Video by:
Daniel D

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924