In-stock alternatives that can ship today
Is this right for you? Product Expert Mike S says:
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we'll be taking a look at the square direct weld jack. This Jack is going to be a heavy duty square style Jack for use on a larger trailer, something like your agricultural trailers or a commercial use. It's going to have our nice S-style or S-shaped handle with a rotating handle on it so that we can crank our Jack up and down easily.The screw inside is an inch and a quarter fix. So it's going to be a nice heavy duty screw to handle the higher weight capacities of both going to be using with this Jack. And then our drop leg is spring loaded so whenever you pull that pin, the drop leg will spring back up into place. So we don't have to worry about fumbling with any kind of pins or clips.
It's just going to retract up in place. To get it deployed, you pull that handle, turn it to the side, and then push that footplate down with your own foot and then it should lock into place whenever you turn the handle back.It comes with a weld-on bracket for our handle, to keep that in place. So we can either weld that to our trailer or the jack, to give us a place to store that handle whenever we're in transit so it's not just moving around in the wind on us. You will want to paint that once it's welded on so it doesn't corrode all the way because as you can see, it's already starting to a little bit.As far as the specs with this, whenever it's fully retracted, from the bottom of the footplate to the top of the Jack it's going to be 27 and one eighth inches. Whenever it's fully extended it's 41 and seven-eighths inches.
So that's going to give us a total of 28 and three quarter inches of travel. 15 inches of that come from the screw travel and then the other 13 and three quarters inches comes from the drop leg. There are four adjustment holes on our drop leg. Those are each three and three eights inches apart.This has a total lift capacity of 12,000 pounds and a static or support capacity of 15,000 pounds. Our drop leg measures...
The footplate on there measures nine by nine inches. Again, this is a weld-on application and that's going to do it for our look at the square direct weld jack..
Average Customer Rating: 4.8 out of 5 stars (316 Customer Reviews)
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing.
Great quality jack. I had never owned a heavy trailer previously. Grew up with 3,000 pounders and finally purchased 18 ft enclosed. It came with an a-frame 5,000 pound jack which was toast after a couple of uses the way I organized the trailer. Purchased a replacement which lasted 2-4 weeks before it was no longer working. Purchased a 2nd replacement 5,000 pound a-frame jack which lasted a week. For those who dont know....don't go through the headache and money. Get yourself a square jack. Get this one or something else heavy duty if its going to be a heavy load. Once you have 1 of these you'll never go back! No other option couldn't be more satisfied.
Great company to deal with!
Great product
My old jack on my trailer quit working do to many years of rust. I ordered this as a replacement. It was delivered on time and was exactly like the description. It was easy to order do to the helpful website.
Very nice product
Nice Product, Good Prices, Arrived on time and in working order. Thanks
Great product, price, and delivered fas t.
Great Service
Review from a similar Ram Square Sidewind in Trailer Jack
Was having issues with the trailer lifting the backend of my truck when I loaded tractors. When I would drive the tractor on the back of the trailer would go down from the weight on the rear which caused the front of the trailer to lift the backend of my truck. So, I bought a couple of the Square, Pipe Mount, Swivel Jacks with Footplates and a Drop Leg. They are Topwind, 7K, Jacks. I had them welded on. This should stop the issue I'm having. I know the 7K was a little over kill but the price was great.
Easy D - 03/11/2019Review from a similar Ram Square Sidewind in Trailer Jack
I like the direct weld jacks. But I wish at least the outside tube was thicker with a little moe clearance with the inner tube. I put them on a 2020 Griffon 14’x7 ton dump trailer. I could not weld them directly to the trailer frame because I would not be able to crank the handles. I had to weld 1/2” x6” plates to the jacks to off set them farther from the fenders. I might use a little to much heat. Before I welded them the crank handles were very free. After welding they bind a little bit. But they still work great.
Review from a similar Ram Square Sidewind in Trailer Jack
This is my fourth project using this jack over the past ten years. The retractable post and long reach provide lots of ground clearance. The weld-on square tube mount design makes it simple to configure to any orientation and height, and is more durable than any "swing-away" style jack can ever be. In ten years, I have "driven off with the plow down" several times and it does not bend. This jack is well worth the money and etrailer is a very reliable vendor. I will buy this again.
Review from a similar Ram Square Sidewind in Trailer Jack
The trailer jack has worked great. We’ve put it to use a lot over the last year and it has never had even the slightest issue. I’d buy it again, although this one is so sturdy I doubt I’ll ever need to replace it.
Review from a similar Ram Square Sidewind in Trailer Jack
I got 2 of these for a landing gear set up on my bumper pull. Customer service said there is no way to reverse gear to use as landing gear so i set them both to turn in same direction. These are by far the best price ive found. Compared to a local prices i basically got 2 for the price of one. Doesnt appear to have any sacrifice in quality either. Very heavy duty. It only took a few days to get them. Customer service is great and so is the product. If you want to see more of my set up with these jacks, you can view my trailer build videos on my online video channel carvings by levi.
Review from a similar Ram Square Sidewind in Trailer Jack
Instillation was very easy and it works amazingly. My trailer had a electric jack before and I was always having to maintain a battery, now I don't he to mess with that and it lifts super easy. I highly recommend this jack for enclosed trailers or heavy tongue weighted trailers.
Review from a similar Ram Square Sidewind in Trailer Jack
Makes a great stabilizer jack for my trailer when loading my tractor. Dont have to worry about putting wooden blocks under the back or have to carry any around anymore.
Review from a similar Ram Square Sidewind in Trailer Jack
Jack worked great.love the low tork option.i made a sleeve with a nut on it and can raise my dump trailer full with a milwaukee drill
Review from a similar Ram Square Sidewind in Trailer Jack
I welded this jack on my bumper hitch enclosed v nose trailer as the nut on my old screw style jack stripped out and let the trailer fall down over the drew. This new jack handles the weight easily.
Review from a similar Ram Square Sidewind in Trailer Jack
7000 lb trailer jack with grease fitting is smoother than I expected. Great Value. Easy on line order and great shipping. Thanks for the attention to my order
Review from a similar Ram Square Sidewind in Trailer Jack
I busted my 20 year old jack coming out of camp, got this replacement quickly and it works great !!!
Review from a similar Ram Square Sidewind in Trailer Jack
Wish this was a standard trailer offering when I purchased it new. Superior design!
Review from a similar Ram Square Sidewind in Trailer Jack
Quick and easy to use, worked great on my trailer!
Review from a similar Ram Square Sidewind in Trailer Jack
Hi quality heavy duty jack.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.