1. Boat Trailer Parts
  2. CE Smith
  3. Roller and Bunk Parts
  4. Brackets
  5. Panel Bracket
  6. Galvanized Steel
CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel

CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel

Item # CE10305G
lowest price pledge
Retail:$39.38
Our Price: $22.06
You Save: 44%
Boat Trailer Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability. Call 800-298-1624 to order CE Smith boat trailer parts part number CE10305G or order online at etrailer.com. Free expert support on all CE Smith products. Guaranteed Lowest Price and Fastest Shipping for CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel. Boat Trailer Parts reviews from real customers.
  • All Info
  • Reviews (33)
  • Q & A (13)
  • Photos
  • Why etrailer?

CE Smith Boat Trailer Parts - CE10305G

  • Roller and Bunk Parts
  • Brackets
  • Panel Bracket
  • Galvanized Steel
  • CE Smith

This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.


Features:

  • Panel bracket supports a 12" roller on your boat trailer
  • Bolts to your trailer's frame
    • Mounting hardware not included
  • Sturdy, 11-gauge galvanized steel construction resists corrosion
    • 6 Gussets provide extra strength by stiffening the bends
  • Slotted mounting holes allow you to adjust the position during installation
  • Made in the USA


Specs:

  • Quantity: 1 bracket
  • Application: 12" rollers
    • Accepts a 13" long x 5/8" diameter roller shaft
  • Dimensions of mounting slots (each): 1/2" wide x 5" tall
  • Spacing of mounting slots: 10" apart on center


Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.


Galvanized Steel

Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.



10305G 11-Gauge Galvanized Steel Replacement Panel Bracket by CE Smith - 12" Rollers




California residents: click here



Customer Reviews

CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel - CE10305G

Average Customer Rating:  4.9 out of 5 stars   (33 Customer Reviews)

This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.

- CE10305G
by:

Very solid products and fast delivery



- CE10305G
by:

Galvanized bracket seems strong and made to last. Good price for what it is. Gave it four stars because one of the roller shaft holes had to be cleaned out with a drill bit to allow the roller shaft to go through the hole.



- CE10305G
by:

Just right.



- CE10305G
by:

Galvanized finish had a chip, but I plan to paint it anyway. Otherwise seems high quality. I bought one locally that is too big and allows the roller bushings to pop out. This measures 12.25 inches width, so it should fit the roller well.



- CE10305G
by:

Overall the this bracket, roller and rod are sturdy and will do the job. Only trouble I had was there was excess galvinizing material blocking the hole for the roller rod. I had to clear it up with a file. Not a big deal but I hope it doesn't leave a gap in the galvinizing.



- CE10305G
by:

Everything was great! Roller bracket is heavy, not tinny at all. The winch bolt pattern was different then my trailer but the trailer is a 1987 so no big deal! Thanks keep up the good work!!



- CE10305G
by:

Your standard 12" roller bracket in Galvanized Steel. Does it's job. Wish it was available in stainless steel though.



- CE10305G
by:

ordered Thursday, received Monday! Good products. ordered from here before, always great service! Will order from here again I'm sure.



- CE10305G
by:

Great product and timely delivery even during the pandemic. Appears to be just what I needed to make my boat loading easier.



- CE10305G
by:

To make it stronger for my purpose I had to all another plate but this bracket was perfect in every wat



- CE10305G
by:

Excellent Products and etrailer provides outstanding service and stands behind their products. Prompt shipping, support, and responses.



- CE10305G
by:

Everything I've ordered from these people has been good quality, this order was no exception. Good products, great and timely service, who could ask for anything more?



- CE10305G
by:

I mounted this trailer roller on the edge of my dock, so I could roll in kayaks single-handed. It has really worked out well.



- CE10305G
by:

These items are very well made and will be having them installed Thursday. I as very pleased how pleasant and helpful Kathy was in ordering. Your website is very well done and the package was very well packed and the tracking is the best I ever seen. I may send a picture after installation and have used them.



- CE10305G
by:

Nice and heavy. Looks like you can try to beat it into submission, but you won't. The galvanize finish looks high qual.



- CE10305G
by:

HD and well designed.



- CE10305G
by:

Happy happy



- CE10305G
by:

Great product



- CE10305G
by:

Everything looks to be very good quality and I'm sure I will be very pleased once I install it. Thanks



- CE10305G
by:

Fast delivery



- CE10305G
by:

was what I ordered and shipment was fast would do business again



- CE10305G
by:



- CE10305G
by:



- CE10305G
by:



- CE10305G
by:


25
33
Show More Reviews

Ask the Experts about this CE Smith Boat Trailer Parts

  • What Hardware Is Needed To Mount CE Smith Panel Bracket CE10305G For 12" Keel Roller?
    To mount the CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel # CE10305G you were looking at you have two options. The first being welding the bracket to your trailer. If you go this route you need to make sure to sand off the galvanized coating as it gives off a harmful gas when it is welded. The second and more common option is using U-bolts. The U-bolts will need to match the size of the frame on your trailer so you will need to measure that. For example we...
    view full answer...
    Image 1 for Image 2 for
  • Height to Top of Roller with Bracket # CE10305G and Roller # YR12243-5 from Mounting Surface
    The top of the roller will end up being 4 inches from the mounting surface. The hole on the # CE10305G is 2-3/4 inches from the mounting surface, and then half of the diameter of the roller part # YR12243-5 is 1-1/2 inches.
    view full answer...
  • Can CE Smith Galvanized Panel Bracket be Used with a Stainless Steel Shaft
    CE Smith Panel Bracket # CE10305G is galvanized steel but the method of which the zinc coating was applied would not matter in terms of galvanic or dissimilar metal corrosion. Stainless steel and galvanized steel work well together with only a slight and minor chance of there being any corrosion. Of course in salt water environments it will increase that chance. So you can use a stainless steel shaft. This bracket takes a 5/8 inch diameter shaft. We do not have stainless steel shafts though...
    view full answer...
  • Does Centering Keel Roller # CE29505 Come with Install Brackets
    The self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes pal nuts.
    view full answer...
  • Can I Use the CE Smith Self Centering Keel Roller on my Trailer
    I may have a solution for you, but it doesn't look like your trailer has any bracket in place in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer. For that reason you would first need to have a roller bracket like the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G welded to the frame or attached with U-bolts to match your trailer frame size. If you went the welded on route, the # CE10305G is galvanized steel...
    view full answer...
    Image 1 for
  • Capacity of YR12244-125EC Yates Rubber Boat Trailer Keel Roller
    According to Yates Rubber, the # YR12244-125EC roller technically carries a 400 lb capacity, but the roller shaft like # CE10727A and the mounting bracket like # CE10305G do most of the heavy lifting. This is the strongest keel roller they offer. My contact at Yates tells me that the first thing to bend would be the roller shaft, and a 5/8 inch diameter shaft like what I referred to above wouldn't begin bending until around the 2000 lb mark. It's recommended to install more than one...
    view full answer...
  • Where To Install a CE Smith Self Centering Keel Roller
    For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G and the Roller Shaft with Pal Nuts for Boat Trailer Rollers part # CE10727A. In regards to installation, these will need to be installed towards the stern of the boat, in the center of the trailer. This would be the only place that would allow them to effectively center...
    view full answer...
    Image 1 for
  • How To Help With Centering Boat On Trailer When Loading
    I have a few options to help with loading the boat on the trailer but the best would have to be the CE Smith Keel Roller for Boat Trailers part # CE29505. In order to mount them you'd need the Roller Shaft with Pal Nuts part # CE10727A and CE Smith Panel Bracket part # CE10305G. I would stick with the same type of roller for the front and rear of the boat trailer.
    view full answer...
  • Parts to Mount 12" Roller Guide
    We have the Yates # YR12243-5 side guide roller measuring 12" long with a 5/8" shaft. We also have the CE Smith # CE10305G Panel Bracket for 12" Boat Trailer Rollers in Galvanized Steel. For roller shafts we have the closest we have is CE Smith # CE10727A measuring 13" X 5/8" shaft, in zinc plated steel.
    view full answer...
  • Recommended Boat Trailer Keel Roller
    You'll want to ensure the height of the new roller is consistent with that of the other support components, such as the roller bunks. This will ensure no one part of the trailer bears more weight than the others. Next time you load the boat you can measure the space at your preferred mounting location and then use the adjustable bracket # CE32004G referenced above to locate the new roller in the correct position. We offer keel rollers in both black rubber and non-marking thermoplastic...
    view full answer...
  • Will Roller part # YR12243-5 Fit on Roller Bracket # CE10305G
    The 12 inch roller part # YR12243-5 that you referenced is designed to fit the CE Smith Panel Bracket # CE10305G. You would just need the roller shaft part # CE10727A which comes with pal nuts and you would be set. There isn't a stainless steel version of this available but this will resist corrosion well since it is galvanized. The roller will spin easily and would work well. This would work well for a roller on a boat trailer for a 500 lb boat. 4-1/4 inches is the distance from...
    view full answer...
  • Parts Needed To Replace 12" Keel Roller That Fits 1-5/16" Diameter Pipe
    I have another option for you, but we do not currently carry any Keel Rollers that would fit a 1-5/16" pipe. Instead I recommend going with the Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 12" Long - 5/8" Shaft # YR12244-125EC you were looking at and then adding the correct bracket # CE10305G and shaft # CE10727A to your trailer. This will allow you to use a standard keel roller, and make finding replacements now and in the future much easier. I included videos...
    view full answer...
  • Availability Of PVC Keel Roller That Is Self Centering
    I may have an option for you, but there is not a 8" version of the CE Smith Keel Roller for Boat Trailers - Self Centering # CE29505. If you are wanting the self centering feature you will need to use 12" # CE29505 and replace your current mounting bracket with the CE Smith Panel Bracket for 12" Boat Trailer Rollers # CE10305G and a new shaft # CE10727A. We do however have the CE Smith Keel Roller for Boat Trailers # CE29517 which is made of the same material and is the 8" length you...
    view full answer...

Do you have a question about this Boat Trailer Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality boat trailer parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate boat trailer part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee David L
Written by:
David L
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.