See what our Experts say about this CE Smith Boat Trailer Parts

• Are Roller Bunks or Keel Rollers Needed on the CE Smith Boat Trailer Part # CE48810
  The CE Smith Boat Trailer part # CE48810 comes with guide ons which help to center your boat during loading and to hold the boat during transport so I don't really recommend adding anything additional in regards to this aspect because of the size of the boat. However, if you will be launching your boat at night or in the early mornings I recommend using the CE Smith Post-Style Guide-Ons with LED Lights part # CE27740 which will provide visual targets. What I do recommend using is a two...
  view full answer...
  
• Specs for the 10" CE Smith Deep V Keel Roller Assembly # CE10404G
  I received your picture but not the spec sheet. The 10" CE Smith Deep V Keel Roller Assembly # CE10404G is a universal keel roller that helps make loading and unloading your boat much easier. The roller itself is 9-1/4" long while the mounting slots are spaced apart by 8" on center, are 5" tall and 1/2" wide. To complete the installation you would just need to get hardware that fits these dimensions as well as your trailer frame.
  view full answer...
  
• Replacement Surge Actuator, Brake Line, V Roller, and Roller Bunks for 85 Magic Tilt Trailer
  Hey Mike, so lets start first with an actuator to replace your coupler. For that the Demco part # DM72VR would be a great option that has as easy to use latch and was designed for drum brakes and a 2 inch hitch ball. It sounds like the brake line was cut right at the back of the actuator so for a replacement for that you'd want the part # DM02032. If you needed a complete replacement brake line kit we have the part # 18SI-BLKIT that you referenced. To do new wheel cylinders on the brake...
  view full answer...
• 10 Inch Black Rubber Keel Roller for a 1/2 Inch Shaft
  The black rubber keel roller that are 10-inches and what we currently offer is # YR10000. Unfortunately, it's for a 5/8 inch shaft. What you could do is replace the roller assembly with the # CE10404G. This V keel roller supports your boat's keel as it sits on the trailer. I also included a link to all the keel rollers we currently offer for you to view.
  view full answer...
• 10 inch Long Keel Roller Recommendation for Rear of Boat Trailer
  A very popular option would be the CE Smith Deep V Keel Roller part # CE10404G which would work well. But I really would need to see a picture of your trailer to get specific on how it would install. The hardware isn't included but U-bolts would work. They would need to be 1/2 or 7/16 inch in diameter. The length of the mounting slots is 5 inch so as long as your frame member is less than 5 inches tall this will work.
  view full answer...
• Length of Mounting Plate of CE Smith Deep V Keel Roller part # CE10404G
  If you check out the picture I attached I tried to pause the review video for the # CE10404G to show when our reviewer was measuring the width of the plate to show that it is 10 inches. The roller is right at 9-1/4 inches long.
  view full answer...
  
• Recommended Keel Roller For Boat Trailer With 3 Inch Wide Tongue
  The keel roller assembly I recommend for your trailer is the CE Smith roller, part # CE32003G. This roller is designed for trailers with a tongue that is 3 inches wide and will work great for you. This features a 5 inch wide roller, the mounting brackets, and all the mounting hardware needed.
  view full answer...
• Does CE Smith Deep V Keel Roller Assembly CE10404G Come with a Metal Sleeve On Roller
  No the 10 inch keel roller of the part # CE10404G does not have a metal sleeve. It has a plastic sleeve instead. You can see it on the part # YR10000 which is just the roller that comes with this assembly.
  view full answer...
• Correct Roller Shaft for CE Smith Side Guide Roller for Boat Trailers
  The reason that you are having difficulty finding a roller shaft for the CE Smith Side Guide Roller # CE29562 is because it is the replacement middle roller for the CE Smith Roller-Style Guide-Ons # CE27610. For this application you would use something like the 12-3/4" x 1/2" # CE10705A because there needs to be some extra length for the end pieces. If you are needing a standard roller then I recommend the Yates Keel Roller # YR10000 which is 10" long and works great with the 11" x 5/8"...
  view full answer...
• Deep V Keel Roller Assembly for Boat Trailers
  I would be happy to help you it sounds like you need another keel roller assembly for your loadmaster trailer and a couple of bunk boards. I recommend the CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 10" item # CE10404G. This has a 10-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability. You will also need a pair of CE Smith Carpeted Bunk Boards for Boat Trailers item # CE27845. These...
  view full answer...
• Does CE Smith Deep V Keel Roller Assembly # CE10404G Mount to Trailer with U-Bolts
  You do not have to use a u-bolt to mount CE Smith Deep V Keel Roller Assembly # CE10404G. You just need to have 1/2" or 7/16" fasteners to mount the bracket to the trailer. Exactly what kind of fasteners to use depends on where you want it mounted and the material of the mounting surface. You also might not even be able to use the mounting slots in the bracket if they will not match up to the size you need. You could drill holes through the bracket if need be.
  view full answer...
• Does the CE Smith Deep V Keel Roller Assembly Have a Weight Capacity
  The CE Smith Deep V Keel Roller Assembly # CE10404G is meant to be used for more of a guide on so it doesn't have a weight capacity.
  view full answer...