Wiring Pigtail and Mounting Bracket Options For Installing Thinline LED Clearance And Marker Lights

Updated 08/07/2021 | Published 08/06/2021

Products Featured in This Question

Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber

(2521)

$13.94

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead

(693)

$4.44

Mounting Bracket for Optronics 90 Series or 91 Series Trailer Lights - Self-Grounding - Black

(103)

$4.34

Mounting Bracket for Optronics A91, AL82, AL90, AL91, or AL191 Series Lights - Open Back - Black

(125)

$9.69

Mounting Bracket for Optronics 90 Series or 91 Series Trailer Lights - Self Grounding - Chrome

(37)

$5.82

Grommet for Optronics A91, AL82, AL90, AL91, or AL191 Series Trailer Lights - Black PVC

(408)

$9.36

Plug - Single Wire with 12" Lead for A91 and AL91 Series Trailer Clearance, Side Marker Lights

(105)

$3.58

Mounting Bracket for Optronics A91, AL82, AL90, AL91, and AL191 Series Lights - Open Back - Chrome

(33)

$3.05

Question:

How are these lights supposed to work without wiring and mounts for the lights?

asked by: Bruce M

Expert Reply:

The Thinline LED Clearance and Side Marker Light # AL91AB require certain mounting brackets and plugs that are either already installed on the trailer or are available separately.

A Right Angle 2-Wire Pigtail # A46PB will work with the Grommet # A91GB if you are looking to recess the light. Or Mount Brackets # A91OB and # A91BOB if you want to mount them on a surface with the wiring running behind the bracket.

The Plug - Single Wire # A91LW is used for Mounting Brackets # A91BB and # A91CB that are self grounding to the chassis. To use the brackets your trailer must have a grounded frame.