Product Experts Available Now!
Call 1-800-940-8924
Optronics Mini Trailer Clearance or Side Marker Light - Submersible - Incandescent - Amber Lens
(359 reviews)
Price: $6.54
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Optronics Mini Trailer Clearance or Side Marker Light - Submersible - Incandescent - Amber Lens
Part Number: MC95AB
In Stock
$6.54
Retail:$9.61
You Save: 32%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (359)
- Q & A (0)
- Photos
Optronics Trailer Lights - MC95AB
Highlights
- Reliable In Any Weather: Sonically sealed, waterproof housing keeps water out for lasting use.
- Simple One-Wire Hookup: Grounds through the stud so wiring is quick and clean.
- Compact Fit Anywhere: Measures 2-1/16" x 1-1/16" x 1" for tight trailer spots.
- Durable Base: Stainless steel construction resists corrosion and road wear.
- Clear Marker Coverage: P2 rating provides 90° of forward light spread for visibility.
Features to know about
Bright and Reliable in a Small Package: Compact Incandescent Clearance Light
This light might be small at just 2-1/16" long by 1-1/16" wide, but it gives you bright, dependable illumination wherever you need a clearance or side marker light. It runs on a standard 12V DC system and draws only 0.2 amps at 12.8V. The amber lens snaps on securely over the incandescent bulb, which can be easily replaced when needed. It’s simple, bright, and tough enough to handle regular trailer use.
Built to Handle Water: Sonically Sealed and Submersible
Water intrusion ruins lights fast, but this one is sealed tight. The housing and lens are sonically sealed into a single waterproof unit that keeps water out even when submerged. You can count on it to keep working whether you’re hauling down wet roads or backing into the water. The stainless steel base adds durability and corrosion resistance so the light stays solidly mounted for the long haul.
Simple Mounting and Wiring: One Stud, One Wire
Installation is quick thanks to its stud-mount design. It grounds right through the mounting stud, which means only one wire is needed for power. If your wiring has a separate ground lead, you can just run that wire to the stud—no special connectors or extra steps required. It’s an easy setup that anyone with basic tools can handle.
Focused Beam for Proper Coverage: P2-Rated Output
For safety lighting that’s clear and consistent, this light is P2 rated. That means it puts out a 45-degree beam to either side of center—90 degrees total—which is perfect for use as either a clearance or side marker light when mounted correctly. It’s designed to give the right amount of visibility from the right angles without glare or wasted light.
OEM Replacement Ready: Direct Fit for Common Models
If you’re replacing an older unit, this model matches up directly with Wesbar #3230/3238 and Peterson #M151A lights. The dimensions and stud layout line up so you can swap it in without modifying your trailer. That makes it an easy replacement choice when your old clearance or marker lights finally give out.
Specs
Dimensions
- Overall dimensions: 2-1/16" long x 1-1/16" wide x 1" deep
Electrical
- Bulb type: Incandescent
- Power draw at 12.8V: 0.2 amps
- Operating voltage: 12V DC systems
Warranty
- Warranty length: 3-year warranty
MC95AS Optronics Mini Trailer Clearance or Side Marker Light - Stainless Steel Base - Submersible - Incandescent - Amber Lens - P2 Rated
Alternate part number: MC-95AS
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
359 reviews
by:
Malcolm
10/01/2026
Good product for replacement on my trailer. Side marker light.
by:
Jeff
09/11/2026
I purchased 5 side marker lights, two came in a plastic clam shell package the other three came loose in the shipping box and appear to be used. thought I was buying NEW lights from this seller!
by:
Howard
09/13/2026
My order was packaged for delivery and I was notified very quickly on a holiday. Delivered on time.
by:
Frederick
07/21/2026
Just what I needed fast shipping good price
by:
Mike
10/26/2025
Thanks for all your help , lost my side marker lights on a fishing trip recently, tire blow out was able to match from you and now back to normal thanks for quick ship
by:
Bryan
10/28/2026
Thanks so much also fast service!!!
by:
Fuji
04/22/2026
Fast shipping!
by:
William
11/20/2025
Just what I needed. Center bolt hole and all. I knocked both of my front amber lights off while mowing around my utility trailer this summer. I like these ultra ice because they’re a little smaller. Don’t let the size fool you for the brightness. These are way brighter than the ones that came on the trailer when I bought it new. Very satisfied.
by:
Ray
05/24/2024
Haven't installed these yet but they appear to be a direct replacement for my 2007 Tracker boat trailer. I'll update later. eTrailer always has what I need at decent prices.
Ray C.
5/25/2025
No issues after one year. Easy install and was a direct OEM replacement.
by:
Bradley
08/06/2026
Came quicker than expected and worked as expected.
by:
Steve
05/19/2025
Replaced exactly what I needed
Thank you
Thank you
Brooke M.
5/20/2025
Looks great! When do you get to take that boat back out to the water? Any memorial day weekend plans?
by:
Garry
06/19/2026
Quality product.
by:
Mark
06/09/2026
Items as described.
by:
Lawrence
07/16/2026
Perfect fit good price
by:
Derick
07/15/2026
Great product
by:
Bill
09/13/2025
Joshua B Was very helpful and kept me informed about my order from placement until delivery. I would order again from etrailer.
by:
Glenn D
10/04/2024
Exact replacement for my Triton Boat trailer (Marine Master) and a good upgrade to the non-submersible side lights on my Harbor Freight 4'x8' trailer I converted to Pond-Prowler trailer use (I had already changed the rear lights to submersibles).
Glenn D.
10/5/2025
The lights have worked great on both of my trailers. I’ll likely be buying more of these 8n the near future to upgrade lights on a third trailer.
by:
Frank
05/29/2025
Package received in excellent condition as well as item that was ordered and one day earlier than expected. Item has been installed, wired and functioning perfectly. Thank You so much for such excellent service.
by:
fernando
02/12/2013
every thing was perfect all done trailer looks great.
i will b ordering one more accessorie
just wish i didnt have to pay a shipping fee but other than that great
prices etc...
fm
i will b ordering one more accessorie
just wish i didnt have to pay a shipping fee but other than that great
prices etc...
fm
Fernando
2/14/2014
perfect the product was for my brothers trailer it all works looks great
by:
Terry
02/04/2026
Great turnaround from ordering to delivery!
by:
Chris W.
12/07/2015
Ordered these lights as part of a complete trailer lighting overhaul. Bought the waterproof cases for the rear and after a little epoxy where the wires enter the case, all is waterprrof and up and running.
Easy to mount and connect to the main wires. After all the work, I can put the boat in and not have to fix a light or take anything apart to fix a lighting issue. Best use of a day over my vacation, outside of fishing.
Easy to mount and connect to the main wires. After all the work, I can put the boat in and not have to fix a light or take anything apart to fix a lighting issue. Best use of a day over my vacation, outside of fishing.
by:
Barbara
11/12/2025
Seems like good quality.
by:
Tom H
02/03/2017
This is the perfect replacement light for my boat trailer. This is the first time I made a puchase from eTrailer.com. Their selection is extensive and at a nice price. For a notice it was easy for me to use their site to find the replacement lights I needed. It was received in less than 5 days at my doorstep and everything I ordered was there. All the tips and installation videos are invaluable to me. This is much more than a great place to purchase lights, it's a DIY'ers learning site.
by:
Tyler
10/01/2025
Great product and customer servce!
by:
Randy
09/24/2022
Bought this light to replace one that was broken when a deer ran into my boat and trailer. It looks identical to the one used on my Ranger trailer. I made minor modifications to make it plug into the existing wiring harness.
I have been using Etrailer for years due to the great customer service.
I have been using Etrailer for years due to the great customer service.
25
359
true
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Can The Bulb Be Replaced On The Optronics Mini Trailer Clearance or Side Marker Light MC95AB?Hey David, thanks for reaching out. The Optronics Mini Trailer Clearance or Side Marker Light # MC95AB is factory sealed so there actually isn't an easy way to remove the lens and replace the bulb. If yours has burned out, the best bet is to replace the entire light with a new one. Luckily, they are very easy to install and wire in. Plus, they aren't terribly expensive. What kind of boat are you trailering?
view full answer... - Do I Need to Remove the Identification Light Bar to Replace the Lights? Hey Kevin. The Optronics Mini Trailer Clearance or Side Marker Light item # MC95RB installs with two mounting screws on the rear of the light. You will need to remove the Identification Light Bar item # MC97RB to access these screws. I attached a picture below so you can see the back of that light bar. What kind of trailer do you have?
view full answer... - Which Trailer Lights will Fit a Fulton Fender F008595?As I couldn't tell if the lights in the picture are LED or incandescent, I included with both options. For incandescent lights, you will need the Optronics Mini Trailer Clearance or Side Marker Light - Submersible - Incandescent # MC95RB for the red light and # MC95AB for the amber light. For LED lights, you will need the Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle # MCL95RB for the red light and # MCL95AB for the amber light. All of these lights...
view full answer...
- Parts Needed to Convert a Trailer Side Marker Light to Running Light and Turn SignalOn trailers, the turn signals and brake lights are combined. You could install the Vehicle to Vehicle Taillight Converter, # 118158, but your side marker lights must be dual function lights, like our Optronics Oval LED Turn Signal and Parking Light, # STL78AB. If your current running lights have only one wire, not including a ground wire, to power the light, it is not a dual function light. I have attached a link to all of our dual function amber LED lights for you to check out. The Vehicle...
view full answer... - Adding Side Marker Lights to Open Utility TrailerYes, side marker lights can be added to your open utility trailer. When adding these lights you will just need to make sure that you do not exceed the amp rating of the trailer wiring harness. In an effort to add lights to your trailer without exceeding the amp rating of the trailer wiring harness, I recommend going with an LED light like the Double Bullseye LED Trailer Clearance and Side Marker Light, # MCL45AB. This light draws a mere 0.087amps at 12.8 volts.
view full answer... - Replacement OptronicsMC-95 Red and Amber LightsWe do offer the red and amber Optronics lights. The red is part # MC95RB and the amber is part # MC95AB.
view full answer... - How to Wire a Mid-Trailer Turn Signal on a 24 Ft Haulmark Trailer Towed with a 2005 GMC Yukon XLIf the lights at the middle of your trailer are connected to the turn signal circuit then they will go solid when the brake lights are activated since trailers are wired with a two wire system. There really is no easy fix for this problem that I am aware of. One option is to wire a connector with an extra circuit, if your Yukon has separate yellow turn signals at the rear, I believe most do, you could use a 5-Way connector set like the 5-Way Flat Trailer Wiring Kit, item # HM47890, and...
view full answer... - Amber Trailer Blinker/Running Light Recommendation for Use on an Older TruckWe don't have exactly what you said you need, but the closest thing we have would be the Miro-Flex, Waterproof, Rectangular, LED # STL35AB. This is an LED amber light you could use that has dual intensity so that it can be used for a blinker and running lights. Only thing is that this is much bigger at 5-5/16" L x 3-7/16" W x 2-5/16 D. For a harness to plug into the light you would want # A47PB and then for a grommet part # A33GB.
view full answer...
- Availability Red Version of Amber Clearance Light # MC95ABYes we do have a red version of the # MC95AB with the part # MC95RB.
view full answer... - How to Wire Trailer Light # MC95AB to Trailer with Two WiresThe trailer light part # MC95AB that you referenced has a single power wire and grounds through the mounting hardware. Since your trailer currently grounds with a wire you can just run the wire to the stud and you'd be set. For butt connectors we have the # 05731-5 for a 5 pack.
view full answer... - Can the Optronics Clearance Light part # MC95AB Install on Trailer that Has 2 WiresThe Optronics Clearance Light part # MC95AB would still work well for you. This light grounds through the mounting hardware so what you would need to do is take the ground wire on your trailer's wiring and run it to the mounting stud of the light and then run the wire of the light to the power wire on the trailer.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Jameson C
Expert Research:
John H
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
10/27/2025
We're glad you got 'er all fixed up, Mike. Good luck on your next fishing trip!