Surface Mounting Bracket For Custer LED Side Marker/Clearance Light CPL26-A
Updated 09/26/2025 | Published 04/23/2025
Products Featured in This Question
Question:
Custer LED Side Marker or Clearance Trailer Light - 3 Diodes - Amber Lens Part Number: CPL26-A Features: Multiple mounting options Surface mounts with snap-in bracket not included What is the part number for the surface mount bracket? Im looking for a bracket that is the same orange material as the lens but a black one would work too. Thanks!
asked by: Adam
Expert Reply:
Hi Adam!
We do have another option that will fit the exact same way, but I am sad to say the Custer bracket is no longer available.
The Custer LED Side Marker or Clearance Trailer Light # CPL26-A snaps into the Optronics bracket # A91CB perfectly (almost too perfectly as it took a slot screwdriver and some patience to get it out when I test fit them together). Unfortunately, it does only come in silvery chrome finished plastic, but it could very easily be rattle canned to whatever color you prefer. Just make sure to tape over the metal bits as that is how it grounds. Speaking of which, if you go this way, you will also need the single wire # A91LW, if you don't already have this style installed.
If you decide to change it up and go with a grommet style install, you would want the # G26G and the # A46PB wiring harness.
Are you replacing a damaged light or building something new?
(click to enlarge)
Product Page this Question was Asked From
Custer LED Side Marker or Clearance Trailer Light - 3 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 2-1/2L x 1-1/4W Inch
- Custer
more information >
Continue Researching
- Q&A: Do Thinline LED Clearance and Side Marker Lights Come With Bracket and Wiring
- Q&A: Offset On Kenda Karrier KR35 ST175/80R13 w/ 13" Aluminum AM03 Wheel
- Q&A: Which LED Trailer Tail Lights Fit A 2003 Shorelandr Galvanized Boat Trailer?
- Q&A: Choosing Between Curt TriFlex and Tekonsha Prodigy P3 Brake Controllers
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: Replacement Trailer Taillight Recommendation for 2014 Yacht Club Aluminum Boat Trailer
- Q&A: Upgrading Lights on 2000 Tracker PT175 Trailer to LED
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: The Best Boat Bumpers
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Lazer S.
9/26/2025
Hey Adam, Did you end up using the Optronics bracket with your Custer light, or did you try the grommet style install instead? I'm curious to know how it worked out for you, as it could help others looking for similar solutions.