bing tracking image
  1. Accessories and Parts
  2. Stromberg Carlson
  3. Camper Jacks
  4. Trailer Jack
  5. Legs
  6. Driver Leg
Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"

Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"

Item # LG-177202
Retail:$249.10
Our Price: $233.36
You Save: $15.74
Accessories and Parts
Shipping Weight: 29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included). 1-800-940-8924 to order Stromberg Carlson accessories and parts part number LG-177202 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2". Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (40)
  • Q & A (0)
  • Photos

Stromberg Carlson Accessories and Parts - LG-177202

  • Camper Jacks
  • Trailer Jack
  • Legs
  • Driver Leg
  • Stromberg Carlson

Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).


Features:

  • Replaces the lead jack for your tandem landing gear
    • Designed for use with Stromberg Carlson models LG-2 and LG-4
    • Can be used with most landing gear sets, including Venture and Lippert models
  • Provides a mounting point for the hand crank or motor (sold separately)
  • Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included)
  • Constructed of heavy-duty steel
  • Includes drop leg and cage pin
  • Made in the USA


Specs:

  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Leg length: 33-1/2"
  • Weld stops:
    • Outside to outside: 21-1/2"
    • Inside to inside: 19-1/2"
  • Weight capacity: 4,000 lbs for manual crank, 2500 lbs for single motor


LG-177202 Stromberg Carlson Replacement Lead Leg for Venture Landing Gear - 33-1/2"




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2" - LG-177202

Average Customer Rating:  4.8 out of 5 stars   (40 Customer Reviews)

Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).

by:

I recently ordered this landing gear through E trailer and the product was received quickly but in shipping it was damaged so I contacted them and the damaged part was quickly replaced, no hassles just good service



by:

this landing gear work great for my tra iler



by:

etrailer allowed the return of the first leg sent. It did not fit. They worked to find one that would. I had to have another stop tab welded on the Stromberg Carlson leg as Forest River’s design of the receiving brackets on our 2012 Brookstone Ruby required it. Thanks etrailer. Installing it tomorrow.

Bill

12/3/2022

Working fine. Thanks.



by:

This rating is for the purchase and delivery as it will be about a week before the part is installed.
The order was delivered in only 3 days.....That's [retailer] freaky fast!!!
Great service by etrailer, once again.

Rf-4c J.

3/31/2018

Installation was fairly straight forward. One problem was the lugs on the side of the jack were too close together so the leg would not go in place. I took it to a friend who had an angle grinder. After dressing the top lug off a bit on the bottom side, about 1/8th inch, the leg fit fine.Due to medical reasons that jack has only been used twice as the trailer remains in storage.



by:

These legs worked great,look and feel to be of good quality and best of all made in the USA.



by:

Perfect replacement lead leg for our 2003 Outback travel trailer. Extremely fast shipping which was so nice when we needed the part as quick as possible. Very impressed!



by:

Landing Gear Leg and Motor Gearbox replacement. Real Deal Parts.
1 for 1 removal and replacement for each component- Perfect fit.
This business is run like each of the employees takes pride in making the business profitable. The website is a tremendous resource for anyone needing guidance in selecting replacements for a few 10+ yr old broken/ worn out parts (as I was).
Fast shipping too.



by:

Bough two lead legs for my 5th. One broke a worm gear and other one was going. Passenger side one went right in. The drivers side one i had to file down the edge of mount some to get it in. The two mounts were just touching and would not pass each other. New landing gear seems strong and should outlast ny ownership for years to come. Whats really nice the top comes off and you can grease the worm gear on these, unlike my stock ones there was no way to really grease them. You can also replace the worm gear on these as well ,unlike the stock ones where gear is stamped into the leg. These are removable if needed.



by:

I have a 36ft toy hauler as I was about to park it after a weekend at the dunes I was lowering the Landing gear and nothing motor turned no lift :( called etrailer and they were great they knew everything I needed and had it in stock , here's the best part shipping was very fast!!! , I installed the new replacement legs today and fit like a glove wow I'm back in business !! !!



by:

While on a camping trip one of the front jacks of our toy hauler broke. When we got home ordered a replacement from e trailer. Was received in 2 days and installation took about 30 minutes. Pleased with the experience and product so far. Would definitely order from them again.



by:

I couldn't have received better service ! Dana was amazing and I always tell my friends about the great service she provided for me. I received emails start to finish from her the only thing Dana could have done more would have been install the landing gear for me ! as far as the product it is very good quality .



by:

Product and service was great.

Need
to be care full when ordering as we missed this. Each trailer takes two different legs. Our original legs had no markings on them and it was all measurements. This part worked out great. We just did not catch that you need a right and left landing leg.



by:

I ordered the second downleg for my fifth wheel. Delivery was quick, both legs fit perfect and work perfect. Etrailer also matched the price from a different source.

Everything was a great experience



by:

My landing gear arrived a full two days early, and they turned out to be the exact parts needed. I didn't take any pictures because in just a short time, (about an hour) I had the entire project completed. etrailer.com does a really good job!



by:

Great service mail right out. The lead leg fit perfectly. Very happy with your products and service



by:

Part was delivered at noon and it fit perfectly. From time of order less then Two days since we could not disconnect the trailer.



by:

Product received as expected. Satisfied with etrailer again.



by:

Excellent price, fit perfectly and was easy to install.
Customer service person was knowledgeable in finding the correct part#. Shipping was on time



by:

Great price
Exact fit
Easy install

Replaced a leg with broken gears



by:

product was easily installed and a good match.



by:

Customer service was great. Arrived only days after ordering. Will do business here again



by:

Just received it 1 day earlier than promised. Haven't had a chance to replace it so will update later.



by:

Exactly what was advertised at a good price. Prompt delivery.



by:



by:

Product great serviceok


25
40
Show More Reviews

See what our Experts say about this Stromberg Carlson Accessories and Parts

  • Bracket Location Measurements Of Replacement Lead Leg for Stromberg Carlson Venture Landing Gear
    I went to the warehouse and took some measurements of the Replacement Lead Leg, part # LG-177202 for you. I have attached a photo of the leg with the measurements noted. From the top of the leg to the top of the upper bracket is 7 inches. To the top of the lower bracket that distance is 27-1/2 inches. The brackets are 1 inch tall so the distance to the bottom of the upper bracket is 8 inches and the distance to the bottom of the lower bracket is 28-1/2 inches.
    view full answer...
    Image 1 for
  • Stromberg Carlson Replacement Lead Leg for Venture VMC900R
    I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg # LG-177202 will work well as a replacement for your Venture VMC900R-069233. I have attached a picture of the measurements for the bracket placements. If your current Venture landing gear uses these dimensions then you will not have to weld the brackets to your trailer.
    view full answer...
    Image 1 for
  • Replacement Lead Leg for 2010 Jayco Eagle 5th Wheel
    The landing gear legs on your 2010 Jayco Eagle could be made by a few different companies but I would not know exactly which one that is. That said, brand is not really needed for choosing the correct replacement but rather length. If the outer tube measures 33-1/2" long then I can confirm the Replacement Lead Leg part # LG-177202 is what you need.
    view full answer...
  • Can a Venture Landing Gear Leg be Greased
    I do not recommend adding grease zerk fittings to a jack leg that did not originally come with them. drilling holes into the jack could compromise its structural integrity. You would need to open up the jack legs to add grease. Before adding any grease you will need to make sure that you completely remove any of the old grease. This is because not all greases are compatible with each other, see linked help article. To open the top you will need to pry the cap off with a screwdriver. Inside...
    view full answer...
    Image 1 for
  • Replacement Landing Gear Legs for Set with Number VMC900R
    I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg # LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part # LG-177201.
    view full answer...
  • Correct Repair Kit for Lippert Replacement Lead Landing Gear Leg LG-177202
    The correct repair kit for the Lippert replacement lead leg part # LG-177202 is the part # LG-146059.
    view full answer...
  • Replacement Jack Legs For VMC900R Landing Gear
    While we do not have a way to look up your exact jack number we have found the Lead Leg # LG-177202 and Follow Leg # LG-177201 work as replacements for the VMC900R landing gear jack systems. You can verify this is the same jack leg as yours by measuring the overall length at 33-1/2" and the distance between the weld stops at 19-1/2". If you have a different measurement for either please let me know what your measurements are.
    view full answer...
  • Replacement Landing Gear Set for 2010 Jayco Super Lite 31.5 FBHS
    Sounds like you have the now discontinued Atwood landing gear set that had 36 inch overall length outer tube lengths. The good news is that we have landing gear sets that will easily replace what you have but the outer jack length will be different. The weld stop brackets you have now are at the standard distance apart so it would be easy to replace what you have with a new set like the # LG-179014 which will bolt right up.
    view full answer...
  • 2010 Jayco Fifth Wheel Landing Gear Troubleshooting
    It sounds very much like you have a bad gear box like the Aluminum Gearbox for Stromberg Carlson Landing Gear part # LG-179015. Which is designed for Stromberg Carlson landing gear. To confirm this remove the motor then the old gearbox. Try at this point to operate each of the legs individually. If they both operate it is the gearbox. If the gearbox turns okay but one leg won't travel then it is that particular leg binding. I included a video I did of the gear box replacement for you...
    view full answer...
  • Replacement Lead and Follow Legs for Venture VMC900R Landing Gear for RV
    If you are in need of a replacement lead leg for your Venture vmc900r you'd want the part # LG-177202 or for a follow leg part # LG-177201. The lead leg is the one you'd attach the crank handle to and the follow leg is the leg that is opposite of that one.
    view full answer...
  • Does Lead Leg # LG-177202 Come Pre-Assembled with Gears in Leg
    The Replacement Lead Leg for Stromberg Carlson Landing Gear # LG-177202 comes complete and ready to install. The gears are already installed in the leg. If you were looking for a gear kit to fit a leg like this you'd want the part # LG-146059.
    view full answer...
  • Replacement Jack Legs for Venture Landing Gear VMC900R
    If you are in need of a replacement lead leg for your Venture vmc900r you'd want the part # LG-177202 or for a follow leg part # LG-177201. The lead leg is the one you'd attach the crank handle to and the follow leg is the leg that is opposite of that one.
    view full answer...
  • How to Determine Correct Replacement Lead Leg for Landing Gear
    In order to determine which replacement lead leg you need, you'll need to know the model of the landing gear on your trailer (we have no way of knowing what you have), and measure it's outer tube length. For example, if you have a Venture, Lippert, or Stromberg Carlson landing gear with legs that measure 33-1/2 inches you can replace the leg with the Replacement Lead Leg for Stromberg Carlson Landing Gear # LG-177202. I have added a link below to a video review, as well as a link to our...
    view full answer...
  • Replacement Lead Landing Gear Leg for a 2011 Heartland Sundance SD 2800RL
    Yes, you can replace just the lead leg on the landing gear set of your 2011 Heartland Sundance SD 2800RL. As long as the weld stops on the leg are positioned 17-1/2" apart outside to outside (see photo) then you can use the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear part # LG-179013 which has an outer tube that measures 29-1/2" long.
    view full answer...
    Image 1 for
  • My Follow Leg Has Different Gearing Than the Lead Leg
    I have an option to get the legs on your 1998 Nash 29.5 Fifth wheel to even out, but unfortunately gears are brand specific, so you won't be able to install replacement gears that will even out the gear ratio between two different brand legs. The most efficient option is to replace the lead leg with the matching Replacement Lead Leg for Stromberg Carlson Landing Gear # LG-177202. Replacing the leg will enable you to keep the legs moving at the same speed and will even out your trailer.
    view full answer...
  • Replacement Venture Lead and Follower Legs for Venture Landing Gear on 5th Wheel Trailers
    The replacement landing gear leg # LG-177202 is rated for 4,000 pounds for an 8,000 pound system using either manual crank or dual motors. For a single motor it is rated for 2,500 pounds. The matching replacement follower leg is # LG-177201. Lippert makes these legs now. They acquired Venture in 2004 or 2005 so since you have a 2009 toy hauler these are the correct replacements.
    view full answer...
  • Recommended Landing Gear Leg Replacements for 2008 Rag'n 30 Foot Trailer
    The correct replacement landing gear legs for your model number VMC900L is # LG-177201 for a follower leg and # LG-177202 for a lead leg. I've attached the dimensions of these legs so you can confirm a fit on your trailer.
    view full answer...
    Image 1 for
  • Replacement Follower Leg Recommendation for 2011 Jayco Eagle Super Lite
    What you need is the Stromberg Replacement part # LG-177201 for the follow leg and part # LG-177202 for the lead leg. These match the weld brackets you have and are longer than the 179014 you have as well.
    view full answer...
  • Replacement Landing Gear Driver Leg with Bracket Stops 21 Inches Apart
    It looks like replacement landing gear driver leg # LG-177202 is a fit. The distance from the top of the top stop to the bottom of the bottom stop is approximately 21-1/4 inches. I have included a picture that shows this and other measurements for you. If the dimensions are off some then you could have the landing gear brackets welded on at the proper spacing for the replacement leg used.
    view full answer...
    Image 1 for
  • Landing Gear Replacement Leg for 1995 Nu-Wa Hitchhiker II
    We don't have anything with the weld stops at the precise points of your current legs. I recommend using the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" # LG-179013 and follow leg # LG-179014. These will be slightly longer than yours and you will need to add weld stops on the correct locations or move the brackets on the trailer to fit the weld stops on the legs.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Lead Leg and Gear Box for Venture Landing Gear
    The part numbers you have provided indicates that the landing gear is a Venture system. For a replacement 33-1/2 inch lead leg use # LG-177202. For the gear box use # LG-179015. Current pricing is available on the product pages.
    view full answer...
  • Replacement Landing Gear Legs for a Venture Landing Gear Set
    For a replacement Venture landing gear lead leg you would want the part # LG-177202 and then for the follower leg you would want the part # LG-179014. If you also need the gear box you would want the part # LG-179015.
    view full answer...
  • Replacement 29-1/2 Inch Landing Gear Legs for Venture Landing Gear
    We do have the correct 29-1/2 inch replacement legs for Venture landing gear, which is the following: - Replacement Lead Jack with Drop Leg # LG-179013 - Replacement Follow Jack with Drop Leg # LG-179014
    view full answer...
  • Replacement Leg Needed for a Stromberg Carlson LG-4 Landing Gear
    If one of the legs is requiring prying on with a screwdriver to get it to work, I highly suggest replacing the leg. This will depend on which leg needs to be replaced, but we do have options for both sides. With that being said, if you need the Lead Leg, you will need the # LG-177202. A quick and easy way to tell if it is the lead leg is it will have the gear box and motor attached to it. If these have been removed, the shank coming out of the side of the leg will be longer than the shank...
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Shelly K
Updated by:
Shelly K
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Carrie F
Updated by:
Carrie F
Employee Wilson B
Written by:
Wilson B
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.