Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement manual crank handle comes in handy in case of lost power at your campsite or a mechanism failure. Use the crank handle to manually raise and lower fifth-wheel landing gear.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there camper owners. Today we're gonna be taking a look, at Lippert's Manual Crank Handle for their landing gear systems, or for their powered stabilizer jacks. This manual crank, will come really in handy if you had a power loss on your trailer while your landing gear or your stabilizer jacks are down. For an example, let's say you're at your camp site and you've set everything up, and then all of a sudden you're have a short and the cells go bad on your battery and you no longer have enough juice to draw 'em back up. Well, now your trailer stuck there at the campsite, and what are you going to do You need a way to be able to retract your landing gear and this handle here will slide directly in it, whether it's your landing gear or your stabilizer jack, and you can retract those manually, see we can bring up our stabilizers or if it was our landing gear, maybe we need to pull our truck under it and then we can lower it down and hook up our fifth wheel or our gooseneck. Additionally, if maybe you get to your campsite and you find oh no we've left our accessories on, and we had too many accessories on.
Then it exceeded what our charger from our truck was when we we're pulling our camper there and our batteries are now dead, and we're having an issue getting our jacks down, well we can grab our handle and we can go ahead and take care of that manually as well. And I kinda liked this because you can use the power option, and maybe you're like, ah you know, I wanna go a little bit, put a little bit extra on it from what the motor put on there. You can stick your handle in here and just give that little bit extra snug if you think you need it. And if we look at the end here, it's designed to work with the manual retraction attachment on either your stabilizer jack or your landing gear, and you can see it's just got a slit in there that lines up with the prongs and it's pretty deep here, this shaft. So you might try and use some pliers or something else, and you're really gonna have a hard time finding something that's gonna fit on there.
This slides on there very easily and gives us plenty of leverage. The center portion here has a nice grip on it that rotates so we can grab it by there to stabilize it. And we've got similar handle here on the other side, and you can see, we can easily hold everything and crank it, and we can really get some speed going, 'cause everything moves very easily. And you can do the same in either direction. You'll also notice that the length of our arm here is plenty long to attach into the stabilizer jack or your landing gear and give us plenty of distance outside of our trailer.
So that way we're not bumping our arms and cutting ourselves up on sharp edges underneath and things like that. And so you might be thinking, hey that was sticking out pretty far is this going to be a pain to store It's about 29 inches in length and should store in your under storage compartments fairly easily. That can tuck back up nicely and there's still tons of room in there for plenty of gear so, it's almost unnoticeable, in the amount of space that it takes up. And that completes our look at Lippert's Manual Crank Handle for their landing gear or powered stabilizer jacks..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Kate F.
2/5/2026
Glad to hear we are doing things right Charley! etrailer is lucky to have you as a loyal Neighbor (customer).
Dave
6/27/2017
Good quality works well.
John
6/1/2021
Luckily havent needed to use it but really glad that I have it!
Joseph R.
7/18/2020
Perfectly
Mike L.
10/15/2018
This particular Manual Crank handle is designed for a Lippert Components Fifth Wheel Landing Gear, its not designed for a scissor jack. If you could let us know the manufacturer of your jack, wed be happy to look into locating the proper crank for you.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William M.
8/10/2019
I traded up to a 2019 Grand Design which came with 4 manual scissors stabiluzers..Very happy with it.