Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed to work with most scissor jacks, this unique T-slot drill attachment is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drills.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at the Ultra Fab T-slot power drill adapter for scissor jacks. This T-slot attachment lets you use a power drill to speed up extending and retracting of scissor jacks. It eliminates manual cranking, and it works up to 10 times faster than hand cranking your scissor jack system. This is designed to work with most scissor jacks, offers easy operation with a power drill that uses 3/8 inch bits. So you can see there, this is the portion that would fit into the drill. It's constructed of zinc plated steel.
It's very strong and durable, and it's going to resist rust and corrosion. It's covered with a lifetime warranty. The inner diameter of this hole right here is 0.66 inches, and then the slot depth if 0.78 inches. That's gonna do it for today's look at the Ultra Fab T-slot power drill adapter for scissor jacks.
Average Customer Rating: 4.6 out of 5 stars (67 Customer Reviews)
Designed to work with most scissor jacks, this unique T-slot drill attachment is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drills.I had hoped that this part might be usable with my five year old Atwood 4000 front trailer jack, but unfortunately it turned out to be too large. (The part that solved that problem was the 30" Stromberg Carlson crank, part #LG-119226, also sold by eTrailer.) However, this is a sturdy part that no doubt works well for its intended purpose (scissor jacks).
The UF48-979071 saved me a lot of time and a lot of work. I have only partial use of my right arm. I simply attached the etrailer tool and in no time my trailer was leveled. I do see a small problem with it but nothing serious. I would like to have been able to add about 4 to 6 inches to it by adding a 1/4" drive extention between the tool and my cordless drill but the end that goes into the cordless is not an ISO (industry standard organizatrion) connector. No problem. The tool worked awesome. Keep up the good work.
Dennis M,
Londonderry, NH
08/26/2019
Perfect fit for the 2018 T@B camper. Worked like a charm. Looking forward to ditching the hand crank.
The product arrived earlier than expected and worked great
was very helpfull in finding right part
Thank you for your email. Yes the electric trailer jack has eliminated a lot of work during hook up and set up of my travel trailer. Also the drill adapter to raise and lower the stabilizer jacks has to be among one of the top inventions of the century.
This is a very handy tool to raise and lower the stabilizers on my camper. As always, excellent service from etrailer.com.
Ann B.
8/23/2016
Excellent!
This is a great option for putting RV stabilizing jacks up and down instead of tons of hand cranking. Just put it in a battery drill gun and zip the stabilizer jacks up and down. A lot less time kneeling on your knees cranking by hand.
This is a game changer! Connect it to your cordless drill to raise and lower your jack stands to make setup and take down easier. Good quality bit that plugs into my Ryobi drill perfectly. It's been a year and about 15 camping trips, and the bit has held its shape well. I would definitely by this again.
Works great on our Airstream Bambi's stabilizers. I only took off a star because I wish it had a 1/4 in. hex on the end to fit the quick-release extension I use with my cordless drill. The end will fit in a standard drill, but the jack screws are set pretty far back under there and require an extension to easily reach. I had to use a socket and bought a 1/4 in. hex to 3/8 socket adapter to make it work for my application, but it works well. Recommend, but just a heads-up.
A real time saver over hand cranking
This is perfect for my son's camper but if it were 3 to 4 inches longer; then, he could use it to crank up the top and lower it. I would highly recommend it for jacks.
This little tool makes camp setup so much more enjoyable. My biggest dislike of camping was lowering and raising the jacks. Now I just hook up my electric drill and I'm done in seconds.
Got this for the Jacks on my small trailer...very handy little gadget. Takes much less time to level the trailer...leaving more time for fun!
Works very well and speeds up raising/lowering scissor jacks when using a cordless drill!
Looks like it is exactly what I was looking for to speed up the process of lowering the jacks on the trailer. Was delivered very efficiently.
The T-Slot Power Drill Adapter was just what my husband needed. He was pleased with it and it works well.
This tool is a must when operating your trailer stands, it works great with no problems! Quick delivery too!
Just what I needed. It will be much easier to get the stabilizers up for me.
Thank you.
This product makes it all lot easier to open and close my tent trailer .
Louis
This is a good quality tool and will save a lot of time and work using it will my cordless drill when leveling the Camper. Fast delivery and nice people. I recommend these people to everyone !!!
Made leveling jacks on camper a breeze
Nice socket, fits my Jayco 23B EXP stabilizers........fast shipping!!
These adapters are hard to find. They were as advertised. Solid and well made. delivered quickly. Good product
It came promptly and is of good quality. We were unable to use it since it didn’t fit our type of Jack.
Lynne
7/28/2020
I couldn’t use it. It was the wrong size. Nothing wrong with the part, it just didn’t fit.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dennis N.
8/27/2020
Just used it about 2 weeks ago this August.Will be using it again mid September. Works great, thank you. 8-27-20