Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX).

Replacement handle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. Designed for TJD-12000 Series jacks.

Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.

Replaces the handle from your etrailer or Ram gooseneck coupler. Designed for use with GCPN Series, GCSQ Series, and GCSQTW Series couplers.

Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 3K- 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, zinc finish. Designed for TJD-7000S Series jacks.

Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Grooved handle grip allows for comfortable, easy cranking. Designed for MJ-1000BBX Series jacks.

Replaces the crank handle for your Bulldog 180 Series, heavy-duty, square-tube trailer jack. Includes a vertical clevis for installing on sidewind jacks. Extends 17-1/2" from your Bulldog trailer jack.

Replaces the corrosion-resistant, zinc-finished topwind handle from your etrailer or Ram 2,000-lb or 5,000-lb jack. Handle lets you to manually crank the jack. Designed for TJA-2000, TJA-2001, TJA-2002, TJA-2006, and TJA-5000 Series jacks.

Replaces the crank from your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity. Handle allows you to manually crank the jack. Mounting hardware included. Designed for TJD-12000 Series jacks.

Replaces a hand crank assembly for your Bulldog sidewind jack (BD195351, BD195352, BD195354, BD195356, BD195362, BD195368, BD195369, BD190754, BD190756, or BD190758). Measures 8-1/2" long. Also fits Crown jacks with 7,000- to 8,000-lb capacity.

Replaces the crank handle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.

This steel rod lets you easily fine-tune your stabilizer jack's height. Insert the handle into one of the stabilizer's drop leg holes to crank the stabilizer into place.

Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW350D, ORJW500D, or ORJW1SU). Corrosion-resistant zinc finish.

Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.

All mounting hardware is included with this jack crank assembly. When installed, primed handle will extend 17-1/2" from your heavy-duty, square Pro Series jack.

Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks.

Replaces the connecting rod and allows you to operate the lead leg and follow leg of your etrailer or Ram 50,000-lb landing gear set (STLG-5003321, STLG-5003312, TJD2SPDSET-50100) at the same time.

Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW750D or ORJW2SU). Corrosion-resistant zinc finish.

Replaces the crank handle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.

Replaces the 6-1/2" long crank handle for your Bulldog sidewind jack (BD1700100301 or BD1700100317). Also fits Crown jacks with 2,000-lb to 5,000-lb capacities.

Replaces the sidewind handle for your Fulton XP15 series marine jack. Crank handle, pin, and bushing included.

Replaces the crank handle for your Bulldog round, sidewind jack with a 2,000-lb capacity. Includes handle, gear kit and black, teardrop-style knob.

Replaces the broken crank handle for your Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708).