Replacement 5th Wheel Landing Gear Manual Crank Handle for 1985 Jayco 5th Wheel

Question

Question:

We have lost the crank for our 1985 jayco 5th wheel 25foot trailer. Can you tell me what will work for this?

asked by: Diane

0

Expert Reply:

It sounds like you need a new manual landing gear crank for your 1985 Jayco 5th wheel. The Lippert Replacement Manual Crank Handle # LC119226 should do the trick for you. Lippert makes almost all the trailer frames in the U.S. recreational vehicle industry and their landing gear are almost surely what you have. This same crank handle also fits Stromberg Carlson landing gear.

expert reply by: Adam R

0

Answer 1

The lead leg of your landing gear is the leg that has the motor and gear box attached to it directly. The follow leg has a connecting bar that is attached to it from the lead leg to move at the same rate as the lead leg. The follow leg does not…

view full answer...

Answer 2

The replacement panel you need for your 2016 Palomino Columbus is the part #LC421484 based on the picture you submitted.

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Chris! Yes, Dicor Self-Leveling Lap Sealant #DC94SR is a great choice for installation of the Overlander Expansion Kit #GP76AR. You will also want to pick up some butyl tape #DC38SR. The butyl tape will go under the mounting brackets, and…

view full answer...

Answer 8

Hey Jeff! The best option for a self-leveling sealant is definitely Dicor. This is probably the number one name in that space, and is compatible with EPDM, TPO, PVC, DiFlex II, and BriTEK roofing materials. There are a variety of colors available,…

view full answer...

Replacement 5th Wheel Landing Gear Manual Crank Handle for 1985 Jayco 5th Wheel

Product Page this Question was Asked From

Continue Researching