Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This heavy-duty adapter plate allows you to connect a MORryde pin box to the PullRite SuperGlide hitch on your short-bed vehicle.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Mor-ryde pin box adaptor for the Pull Rite SuperGlide hitch. Now this adapter plate will let you connect your Mor-ryde pin box to your Pull Rite SuperGlide hitch. This is a nice heavy duty skid plate. You can see has the welded on wedge already.
And this well let you enjoy towing your fifth wheel RV with reduced chucking and jerking for a lot more comfortable in cab ride. This is a connection for all Mor-Ryde pin boxes. It is designed for short bed vehicles. It is a bolt on application. It'll easily bolt onto the pin box with the included hardware, which is the bolts, the nuts and the spacer blocks.
This part as made in the USA. Just to get a few dimensions on this. Width of it is right at 13 and a half inches. Total length it's right at 17 and three quarter inches. Total height on it from the very bottom to the very top is right at three inches.
And then the wedge that's already welded on that adds in about another inch of height to it. But that should do it for the review on the Mor-ryde pin box adapter for the Pull Rite Superglide hitch..
Average Customer Rating: 4.8 out of 5 stars (24 Customer Reviews)
This heavy-duty adapter plate allows you to connect a MORryde pin box to the PullRite SuperGlide hitch on your short-bed vehicle.I received the unit in good condition and the install was fairly easy. I had the King Pin Box off the unit so I installed this off the camper which I think is easier. You do need clamps of Vise Grips, and at least 3 but 4 would be better. All lined up still have to test it.
I needed this quick and etrailer came through got in 3 days.I would give them 10 stars if i could.
Product quality and fit are as advertised, but the service provided by etrailer was off the charts good !
The adapter plate went on the MorRyde relatively easily. The whole procedure took just over an hour. I would make just three suggestions, though. First: I have a small hydraulic lift table on casters which I used under the combined weight of both plates (felt like 75 pounds or so). I used the hydraulics to support and position and raise into position the 'sandwich' - thereby saving both our backs. That worked like a charm. Second: when you replace the 7/16-14 nuts on the threaded studs (attached to the rubber shear spring) I found it impossible to reach in from the back to place the nuts (I have fat arms!). Instead I used an old trick of putting a dab of wax on the head of the nut which held it in the socket, And third: you'll need a socket extension to reach into the holes to tighten these nuts.
In conclusion, this is a well made heavy duty (and heavy) product. We're looking forward to using it on our next trip. And, as usual (ho-hum) etrailer was super prompt - I received the product in just a few days. I didn't need any technical help with this product, but it's always comforting knowing it's there if needed. This is not the first thing I've purchased from etrailer and it certainly will not be the last. Thanks folks!
Quinn verified what I was looking for and the shipping was super fast. Capture plate for as I expected and went on without issue. Instructions were included and spot on. I would definitely buy from trailer again in the future. Happy Customer.
Worked as described.
Well, I gave a 4 because the shipping box was all ripped up, although this was probably done by shipping companies. I’m happy with etrailer. I’m not real happy with MORryde however. Upon opening the box, I found all the fasteners were all over the place, some were missing, one rubber hole plug was missing. I called morryde , they sent new fasteners and plugs, however, they made excuses for all the issues. Their quality control is obviously very lacking. On the other hand, the pin box appears to be solid. Time and use will tell.
Had everything I needed and it went right on with no issues. Cant wait to hook it up and hit the road this weekend.
Personal was very helpful and item came when was noted, and was a perfect fit.
All parts and accessories came on time and instructions were super clear. No issues with the installation.
The instructions were very clear, it was an easy and straightforward installation
Fit perfectly and easy to install if you are a handy type person with tools.
Normand
9/22/2024
Have not had a problem so far. Towing has been smoother.
Part came in a timely fashion. Fit perfectly. Exactly what I was looking for.
Arrived ahead of schedule and in good condition very satisfied
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Peter
5/25/2023
The plate worked fine - it did what was supposed to do. We are selling the hitch however as I really do prefer the B+W which I also ordered from eTrailer.