To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Curt A16 5th-wheel hitch is rated for 16,000 lbs gross towing weight and a 4,000 lbs vertical load limit. Its sturdy steel construction and carbide powder coat finish give you a tough, long-lasting setup that stays solid mile after mile. This hitch provides the strength and stability needed to tow heavy fifth-wheel trailers with confidence on long hauls.
The rounded, interlocking dual-jaw system wraps completely around the king pin for full 360-degree contact. That tight hold cuts down on rattle and movement compared with slide-bar designs. The result is a quieter, steadier towing experience that feels locked-in and secure every time you pull out of the driveway.
The built-in color-coded indicator takes the guesswork out of coupling. A quick glance shows red when uncoupled, yellow when ready to couple, and green when locked for towing. You can see the indicator from the cab or at the hitch itself, so you always know the jaws are set before hitting the road.
The A16’s torsion head pivots to match the trailer’s motion, helping to suppress road shock and reduce noise during travel. It self-aligns for easier hookup and keeps things smooth and stable over uneven surfaces. The cushioned double-pivot design makes each trip feel more controlled and less jarring.
For those times you need full bed space, the head lifts off easily with a single pin so one person can remove it without extra tools. Height adjusts from 13? to 17? for a level setup with your trailer. It’s a straightforward design that makes setup, towing, and storage all simpler.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everybody, Ryan here at etrailer. Today on our 2019 Ford F-150 we're gonna be checking out the Curt A16 5th wheel hitch. Nowadays these half-ton trucks are really capable and so people are really, you know, putting 'em through the paces, towing a lot of heavy stuff around and whatnot. So if you have a fifth wheel type trailer, whether it's a camper or something else, you're gonna need a way to pull it and that's exactly what this is gonna help you do. So this is gonna be a fixed mount one, meaning that it's just going to drop into your in-bed rails. These are Curt rails but it's kind of an industry standard.
You know, if you have other manufacturers of rails, chances are really, really good this is still just gonna kind of drop into place and work out there. Being that it's fixed, that kind of, you know, brings me to my next point. So on our truck, this is only 5 1/2 foot bed so it's a really short bed and a lot of times what I usually recommend is a sliding type hitch, right That way when you make turns and stuff the hitch will go back and give you the cab clearance that you need. That way your trailer don't swing around and end up making contact with your cab corner, damaging the truck and the trailer. But what our customer's doing today is his trailer actually has one of those rotating pin boxes.
I believe it's the Reese Sidewinder. So that's how he can get away with using a fixed one. So this hitch is compatible with those rotating pin boxes. So the side of the hitch and the truck moving, the pin box on the camper will. Now if you have a long bed, really don't need to worry about any of that, right A fixed type hitch is gonna work out just fine.
This particular hitch is gonna be rated for 16,000 pounds so probably more than enough for the F-150, but if you like to go a little overkill, there's a 20,000 pound version of this available as well. The head of it articulates and does have a little bit of movement in there just to help absorb some of that road shock and trucking and things like that and making it easier to hook up, you know. So when you back up, this can kind of move around, you know, and kind of guide itself around that king pin on your trailer. And that's gonna kind of bring me to my next point. This has a dual jaw type design, so it's open right now but maybe I can reach over and close it.
And this thing is, it's no joke here. Whenever that's locked around the king pin, you can see it's super strong. It's no joke. It's going to have complete 360 degree contact and that's gonna really create a secure and good connection, kind of giving you some peace of mind there whenever you're towing your trailer down the road. The hitch head is gonna be adjustable. So I believe there's three different adjustments. You know, you can raise it up or down depending on your trailer and how high your truck sits and everything else. Kind of dial that in and get it as level as possible whenever you're towing. Right now we have it in the middle position and I'm letting you know that because a lot of people ask about Tonneau covers, right And if they're gonna be able to use one and not have to bother at taking the hitch in an out. And you should be in pretty good shape regardless of what Tonneau cover you have. On our truck today, we having one of these roll up ones, pretty common. And this at, even in the middle position and this over it, there's still, I mean, a ton of space here. So even if this was up a few more inches, you'd still have plenty of clearance and in most cases, in most Tonneau covers you shouldn't have anything to worry about. If in the off season, if you don't want this hitch back here, you're not gonna plan on using it for a while, you know, you can pull it in and out, which I'm not gonna lie, these things are pretty heavy. Thankfully though, this one, the actual, the head comes off of it separately. So you can remove those. This'll pop out. So you can get that out of the way and then pull the base out. And both of these independently are pretty manageable together. It's not the easiest thing to do. So by being able to break it apart like that, you know, it kind of turns a two man job into a one-man job. Other than that, you know, a nice hitch, it's well built. I like how it looks. Has kind of that flat black, matte black finish to it. You know, I really can't ask for too much more. Relatively lightweight when you break 'em apart and, you know, something you really can't go wrong with. Honestly, you know what our neighbor did here today, kind of got the whole package, which makes sense on an F-150, you know, pulling a big camper around. He got the Curt rails, he got our Curt in-bed wiring. He even went and did Air Lift airbags and a compressor. So I feel like all that stuff together, he should be really happy with and make his towing experience a comfortable and good one. I do wanna say that, I wanna emphasize this again, if you got a short bed like this and your trailer doesn't have one of those rotating pin boxes on it, it's really important to find a sliding type hitch. I just don't wanna see anyone pop this in their truck, make that turn and end up damaging anything. So a sliding one or that rotating pin box is going to alleviate any of those issues. And that'll finish up our look at of the Curt A16 5th wheel hitch in our 2019 Ford F-150..
Ratings & Reviews
Thus hitch works great, much quieter and more solid than previous setup. I needed more flex and articulation and this hitch definitely did the trick.
Unit appears solid and well built. Unit feels and appears well built. Nothing about the craftsmanship seems cheap or shoddy. Everything that moves is crisp and tight. There are no rattles or loose components. I feel confident towing with this hitch. If I have not towed with it yet. The hitch has a sleek strong appearance as opposed to my Superglide on a previous truck that took up a lot of bed space.
I had to assemble the unit. Instructions seemed unclear in regard to the handle assembly. With deliberate inspection, I was able to figure it out. Legs were easy to bolt on with assistance. I am happy with this hitch. Website said I needed to purchase a line plate separately. I forgot to get one but it didn't matter because one (plastic disk) was included with the hitch.
I paid for the shipping upgrade to ensure the hitch arrived before hurricane Mathew. I placed my order at night and eTrailer provided me with a tracking number the following morning. Shipping time said 3-5 days. I ordered late night on a Monday and unit arrived on Thursday afternoon. I'm very satisfied with my purchase and experience with this website.
Joe P.
10/7/2017
After a year, I love this hitch. It’s easy to hook up and unhook unlike the auto slider hitch it replaced. Paint is still good. Silver stuff is still silver. Has a small patch on the head where the camper hitch slides on. Unit performs well. It is quiet during turns. I feel safe using it. I will buy a curt hitch again if ever I need a new one.
Fast shipping and great packaging for shipment - perfect! As heavy as the hitch is, it came to me with no damage or issues. This hitch isn't listed for my truck but the double locking system is what I liked. I had a Reese basic 15,000 lb slide bar hitch that was allowing too much slop. I measured all a parameters and this hitch fit the bill. Reviews on similar Reese style were worrying me so I tried the Curt. Towed for first time yesterday and there was a noticeable difference in the experience. Pin held tightly with much less movement and noise. Hooking up and unhooking were very easy. I have the short bed F150 and my fifth wheel is a Open Range Light series so it is cut to accommodate cab clearance; thus the hitch works for me. In the end, hitch worked perfectly and etrailer was great - price, shipping and service.
David C.
5/6/2018
A year later and hitch is still great. Easy to hitch and unhitch. Much smoother ride and no bouncing within the hitch. Glad I bought it.
We had this installed in our 2014 RAM 2500. We have only pulled the 5th wheel a couple of times but this hitch has worked very well. Hooking up and unhitching is very easy and straightforward. I like the colored indicator system that tells you when the hitch is locked on the pin. The head unit has rubber blocks where it is mounted to the base unit. This allows the head to rock side-to-side when you are parking the trailer on uneven ground. It also allows the trailer to rock slightly as you are pulling it and the movement of the trailer is not transmitted to the truck. However, it is kind of difficult to separate the head unit from the base because the rubber blocks fit very tightly in the pockets in the base unit. A little WD40 helps.
At this point, based on our limited usage, I would definitely recommend this hitch.
Dave R.
7/22/2018
After a year I am still loving this hitch. I have had zero problems or issues with it. Hitching up and unhitching is so easy.
I was very pleased with the Curt A16 5th wheel hitch. Unfortunately I ended up buying a new truck.(I no longer have a need for this hitch). My new truck has a shorter bed which requires a different hitch.
Working great, no chucking to speak of, much better than the previous hitch I used.
Purchased this hitch, install kit, and wiring harness for a new to me 2015 F-250. After watching the installation video and reviewing the included instructions the install went smoothly. The only deviation from the instructions was instead of using a unibit to drill the 9/16" holes in the bed I used a Rotobroach hole cutter(the holes are cleaner and the bit does not drift. I hooked in to my fifth wheel for the first time on Saturday.
It was easy to install and very solid, i towed my 16,000 5th wheel and it road very nice
I purchased both the Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - C16120, and Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4 - RP58093 for my F350 SD 4X4 Crew Cab Long Bed. I'm pulling a 30' Retro 5th. Wheel and at times I pull my tandem axle UTV Trailer (Double Trailers) . I already had the rails installed in my truck, this fit right in and I used the new Pins and Lock Plates for securing to truck. I have pulled all over from South Dakota and the Northwest. The Hitch has performed Flawlessly. No bucking, nor clunking. Very quiet and smooth ride. I would recommend this set up to anyone for convenience of Hook up and Disconnect, Excellent towing, quiet, and the security of the lock pins. I use Disc locks to prevent access for bolt cutters.
John N.
5/7/2021
Excellent! Still working as it did on day one. Very solid, easy to use, and the unit is very quiet. Also no chucking. I highly recommend this product to anybody. We now have 2020 Cameo 12,000# unloaded weight. Pulls perfectly.
Easy install great product love the interlocking jaws I can’t wait to tow with it thank you E trailer for a great used part well worth it with one little scratch on would buy a used product from etrailer anytime
2016 F350 crew standard box. Installation went well with the videos help in about 3 hrs. The bolt leader provided really helped on the driver side.
The installation is straight forward. With a helper it took about 6 hours to install. With the hitch set at it lowest height was able to close my bed cover.
This can be easily put together and installed by one person. I had to put the base into the universal rails loosely and then torque the bolts to spec. This hitch was an upgrade.from the autoslide hitch I originally purchased for my 5th wheel. The noise and banging has disappeared. This hitch was well worth the money. I also purchased the custom fit wedge for my pinbox. I don't believe I could be any happier with this hitch.
Victoria H.
2/21/2025
We love to hear that this made such a improvement in your towing experience, Michael! Do you have any upcoming trips planned?
Great product, even better customer service, fast shipping, and a great price, installation was easy about 20 minutes, mounted on Reese mounting plate also from etrailer.
Extremely pleased with the rails and hitch purchased from etrailer! The video and printed directions were very informative. One caveat though, the bolts inside the frame on the custom kit (2017Chevy 2500hd) are tough, 2 people are needed. We used magnet rods. The hitch(Curt A16) is great but the shipping was FANTASTIC. Ordered on 4/29 and received on 5/1. 2 days!!! Thank you Jane S. and etrailer!!
GREAT product, GREAT price, GREAT folks to deal with! Installed easily, followed the online video and everything went together perfectly. I did move my gas tank vent line on the left side as I was afraid the center bolt head would rub a hole in it but not a big deal.
Etrailer is terrific!
The hitch was simple to install. I also purchased the custom brackets to bolt the rails to the frame. Everything lined up exactly as it should. No drilling on the frame!!! I will review the hitch once I get more use out of it. It looks great though.
2012 Ford F-250 - Fast shipping and easy to follow directions were included. Bed rails and side plates lined up perfectly. My truck has the line x bedliner so I added 1/8” when setting the first rail. I highly recommend using a step bit to drill your holes for the rails in the bed. No drilling was required for the side plates into the frame. Install by myself took 4 hours with no lift. Could definitely be completed faster with an extra hand or lift. Measure several times and drill once and everything will line up great. Highly recommend!
Installation of the Curt C16443-204 custom rail kit was a snap on my 2000 F350 dually. The instructions were pretty generic but not to hard to figure out. Once in place it was easy to line line everything up to fit the hitch in and tighten everything down.
Hitch works very smoothly. Much easier to use than the last hitch we had.
Also light weight for easier removal from truck when needed.
The kit fit extremely well. With my wife and I doing the install it took about 3 hours but 2 hours were trying to reach a dropped bolt!!! Dropped one of the frame bolts inbetween the frame and the DPF tank. Other than that the install was fairly straight forward. Just went out and looked at the brackets and after a year still no rust on them. Definately would buy this again if needed.
I was fully expecting a hitch in excess of 100 pounds to show up in a destroyed box. This did not. They had taken the Time and effort to cover the box with an additional layer of cardboard and it must have had a million staples in it. It was almost comical, you will need a crowbar or large screwdriver to get it open. However, when I did finally get the package open I found a perfectly un scratched hitch with no missing parts. I have not pulled with the hitch yet but , it does look like it is going to perform great. I'm using this in a 2006 ram 2500 4x4 short bed pulling a 2015 forest river Salem and it allows 91 degrees of turning due to the clipped corners on the front cap of the trailer. I will be curious to see how long the rubber isolators last before needing replaced and if they are readily available. Also the curt sticker on the hitch was peeling off when I took it out of the box, would be nice to get that replaced.
Chad S.
2/24/2018
Could not be happier with this hitch. Have never had any coupling or uncoupling problems even in odd angle situations. Does not rattle or let the trailer chuck around. Easy to move. In and out of the truck. The powder coating is fading and showing some signs of surface rust but this is most likely due to it living in the truck unprotected. I have since moved the hitch into a 2017 ram 2500 with the puck system. I bought the puck mount and every thing bolted up nicely. I keep the standard rail legs under the bed of the fifth wheel should I ever need to pull with a truck that doesn’t have pucks. This has happened once when our truck broke down. Would definitely recommend this hitch.
Mike L.
2/24/2018
Product was an exact fit for my 2016 F350 (I have Dual wheels but the kit fits both SW and DRW to my understanding.) I've paid up to $400 labor to have rails mounted in 3 previous trucks. This kit and the videos made me sure that I could do it myself, and I was right. Take your time, measure twice before drilling, and save some money. It took me about 4 hours, but only because I was being extremely cautious with a brand new vehicle. I did learn that the person that installed my previous hitch didn't follow directions as they put the spacers on the top of the bed instead of between the bed and the mounting plates in my previous truck. Getting the spacers in was the tricky part (and probably why the last installer I used didn't do it right). After seeing several other rail installations...I am much more comfortable with the way these mount to a solid rail bracket that is definitely secured better to the frame using heavy duty hardware and no drilling. Great product!
Great product and fit for a 2014 F250. Torque requirements are very high on the 3/4” bolts so you may need some help and a big wrench.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
2/28/2025
That's great to hear, Harlan! Do you have any upcoming trips planned?