Fifth Wheel Hitch Recommendation for Replacing RBW Lil Rocker

Question

Question:

Hi. I appreciate the reply and the info on the Reese hitch. Is there any other 5th wheel hitches that will fit in my RBW existing rails. Thanks

asked by: Brian

1

Helpful Expert Reply:

The Lil Rocker fifth wheel hitch you have is designed to fit the same industry standard fifth wheel rails as the current hitches made so we have several hitches that would work.

The Reese Hitch part # RP30047 would be a great option. It has a 16k capacity and has a great jaw design that will hold the king pin of your trailer tightly for a smooth towing experience.

expert reply by: Jameson C

1

Brian

5/18/2018

Hi. I appreciate the reply and the info on the Reese hitch. Is there any other 5th wheel hitches that will fit in my RBW existing rails. Thanks

Jameson C.

5/18/2018

We have quite a few options actually. Most fifth wheel hitches are made to fit the same rails you have currently. We have the Curt A16 hitch part # C16120 which is similar to the Reese I mentioned in a lot of ways. We have the Reese M5 part # RP300928 which is one of the nicest hitches that will fit your rails as it has a single hook jaw design that provides excellent king pin to jaw contact. Some people swear by the B and W hitches so for that we have the Patriot part # BWRVK3255 which has an 18k capacity.

Answer 1

To install your Li'l Rocker hitch, you'll need an installation kit for your truck that includes the base rails that install inside your truck bed as well as the brackets that install beneath it. I recommend the Reese Universal Base Rails and…

view full answer...

Answer 2

You have two options for installing the RBW Lil Rocker in your 2007 Ford F-150 pickup. You can use the Universal Fifth Wheel Trailer Hitch Installation Kit with Rails, item #RP30035, or the Fifth Wheel Trailer Hitch Custom Installation Brackets -…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

Hey Larry! Yes, the Onan Generator - QG 7000i Onboard RV Generator #CM44MR is capable of using a remote start. For a standard setup, you can use a switch like #CM86RR along with an extension harness #CM26RR. You can also use the EC-AGS+ Auto…

view full answer...

Answer 10

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Fifth Wheel Hitch Recommendation for Replacing RBW Lil Rocker

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching