Recommended Air Bags For a 2015 Ford F-350 That Fit With Curt 5TH Wheel Rail Kit

Updated 02/12/2022 | Published 02/11/2022

Products Featured in This Question

Curt Custom 5th Wheel Installation Kit for Ford - Carbide Finish

(185)

$264.43

Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs

(17)

$147.53

Air Lift WirelessAIR Compressor System for Air Helper Springs - Bluetooth - EZ Mount

(390)

$593.82

Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle

(1351)

$490.84

Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle

(1351)

$472.96

Question:

Which rear air helper springs will fit on my 2015 Ford F-350 SRW And work in conjunction with Curt Fifth wheel brackets C16424-204. Thanks

asked by: Tyler R

Expert Reply:

If your 2015 Ford F-350 SRW with the Curt Custom 5th Wheel Installation Kit # C16424-204 is 4 wheel drive the Air Lift LoadLifter 5000 Ultimate Air Springs # AL88396 is the kit I recommend. Since the maximum payload on your truck is below 5,000lbs it does not help to go to one of the 7,500lb kits. This air lift kit will have internal jounce bumpers that will help to absorb bounce and road shock.

If your F-350 is 2 wheel drive the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88395 will have the same jounce springs that the previous kit offers and if you wish to have the stainless hardware, roll plates and air lines you will need to add the Air Lift Upgrade Kit # AL52301.

With either system the Air Lift WirelessAIR Compressor System # AL58WQ will allow you to adjust your air bags from your smart phone using the Air Lift app. This saves you from having to run air lines into your truck with a gauge that requires you to monitor while driving. The WirelessAir has a smart manifold that keeps the air bags to within 3psi of your last setting while your truck is being operated. This is extremely helpful to prevent damage to the air bags when you are not using them and will keep the minimum 5psi to hold their shape.