Toyota Tundra Truck Tool Boxes

change vehicle

Select Toyota Tundra Year

--Select Year--201220112010200920082007

Available Years for Toyota Tundra Truck Tool Boxes

2012

2011

2010

2009

2008

2007

Tool Box Manufacturers

• 

  DeeZee
  

  Rackem
  

  RC Manufacturing
  

  TruXedo
  

  Redline

Tool Boxes

Truck Tool Box

Trailer Tool Box

Chest Tool Box

Liquid Transfer Tank

Side Rail Tool Box

Wheel Well Tool Box

ATV Tool Box

You may also be interested in...

Suspension Enhancement

Truck Bed Accessories

Locks

Ladder Racks

Brake Controller

Accessory Step

Truck Accessories

Toyota Tundra Toolbox Questions and Answers

• Will DeeZee Specialty Series Wheel Well Toolbox, # DZ95D, Fit a 2013 Toyota Tundra Platinum
  
• To determine if the DeeZee Specialty Series Wheel Well Toolbox, # DZ95D, will fit your 2013 Toyota Tundra, you will need to go by the measurements of the box. I have included a picture showing the dimensions for you. It is 8-1/2 inches wide, 20-1/2 inches front to back, and 18-7/8 inches tall. Compare this to the space available in your truck to determine fit.
  view full answer...


• How does the UWS Topsider Style Side Rail Toolbox Install on a 2005 Toyota Tundra
  
• The UWS Side Rail Toolbox, # UWSPGTS, bolts to your truck bed side rail and comes with legs that will bolt to the floor of your truck bed. All of the installation hardware is included with the toolbox. This toolbox comes in four different lengths of 48 inches, 60 inches, 72 inches and 90 inches. On the product page you can choose the length of the toolbox that you want to order.
  view full answer...


• Will the DeWalt Contractor Series Truck Bed Toolbox # DCSD70LPB Fit a 2008 Toyota Tundra Double Cab
  
• According to our friends as DeWalt, the Crossover Toolbox you mentioned, part # DCSD70, will fit your 2008 Toyota Tundra Double Cab short bed. I have provided a diagram showing the dimensions of the toolbox. I would recommend comparing the measurements shown to those of your truck bed to confirm the fit.
  view full answer...


• Will the UWS Tool Box # UWS06187 fit in a 2007 Toyota Tundra 4 Door with a Bed Liner
  
• The UWS Truck Bed Toolbox # UWS06187 that you referenced is confirmed to fit your 2007 Toyota Tundra 4 door. The bed liner should not pose a problem for you either. To be sure you could measure the distance between the bed rails of your truck. As long as you have more than 61 inches in width the # UWS06187 should fit fine.
  view full answer...


• Slim Crossover Black Toolbox Recommendation for a 2012 Toyota Tundra Crew Max
  
• We have one option that fits most of the criteria you have mentioned for your 2012 Toyota Tundra Crew Max. Take a look at the DeeZee toolbox, # DZ6170NB. The width of this box is 12 inches, it is black, and listed as a fit for your truck. It is not considered a low profile box. I have included a link to all of the toolbox options for you truck.
  view full answer...


• Availability of Deep Tool Box for 2007 Toyota Tundra with 6.5 Inch Bed
  
• The Dee Zee tool box you referenced, part # DZ8370SB is the deepest gull wing crossover-style box Dee Zee offers for your Tundra. DeeZee offers a single lid toolbox that is 69-3/4 inches long by 20 inches wide by 18-1/4 inches tall that has an 11.7 cubic foot capacity, part # DZ8170DLB. The box features a black finish. For a complete listing of tool boxes offered for your Tundra, click on the provided link.
  view full answer...


• Tips on Replacing the Lift Arm Assembly on a UWS Angled and Notched Series Truck Bed Toolbox
  
• I went down to our showroom and took a closer look at a comparable box to the UWS Toolbox, # UWS00403. I see what you mean about limited space. Here is what I think you can do. When I disassembled one of the lift arms, I found it easier to work if the arm itself was removed. To do this you will need to use a small flat head screwdriver and pry off the small retainer clip. Do this on both ends and you can pull the arm off of the ball. That will give you more room. The box that I was worki
  view full answer...


• Black Tool Box Needed for a 2005 Toyota Tundra
  
• It sounds like the width of the toolbox is the issue. If a 17 inch deep tool box hits the wheel wells in the bed of the truck, you should be able to use a 12 inch wide tool box with no contact. The DeeZee Specialty Series Truck Bed Toolbox, item # DZ6170NB, is the only 69-3/4 inch by 12 inch wide black aluminum tool box we carry at this time.
  view full answer...


• Chest Style Truck Bed Tool Box Recommendations for a 2001 Toyota Tundra
  
• Adding the 1 inch measurement will apply to the outside dimensions of the UWS Truck Bed Chest, # UWS01026. But since the lid overlaps the box, that 1 inch measurement will not be added to the bottom of the box, just where the lid is. It will add some height to the top of the box with the lid factored in. I would say that the 1 inch measurement is the maximum which would make it 18-1/4 inches tall. One box that may be a better fit your you is the DeeZee Red Label Truck Bed Toolbox, # DZ854
  view full answer...


• Tool Box Recommendation for a 2011 Toyota Tundra Double Cab
  
• The UWS Truck Bed Toolbox - Narrow Crossover Style, part # UWS00156, you referenced will work for your 2011 Toyota Tundra Double Cab. If you would like a larger capacity tool box that is very similar to the # UWS00156 I would recommend the DeeZee Toolbox for the Toyota Tundra, part # DZ8170DL. I attached a link to installation instructions for this product below. I attached a link below to a page that has all of the tool boxes that will work on your 2011 Toyota Tundra also.
  view full answer...


• Preferred Method of Installing Chest Style Tool Box, # UWS01047 in the Bed of a 2008 Toyota Tundra
  
• The best way to secure the UWS Truck Bed Chest, # UWS01047, would be to drill through the bottom of the box, through the truck bed, and then use nuts, bolts, and washers to secure the box to the bed. I would also add a little Loctite, like # LT37643, installation details linked below. While drilling through the truck may not sound desirable, securing it in this manner will allow the box to remain stationary and not damage the inside of the bed. If you do want to secure it another way, I woul
  view full answer...