Mud Flaps
Custom fit mud flaps from WeatherTech and DeeZee are designed for the easiest possible installation on your vehicle. They are made of heavy duty materials that will withstand the elements and keep your vehicle cleaner.
View the complete list of mud flaps by entering the year, make, and model of your vehicle to the left.
What our customers are saying:
Great so far... Great selection and informative site.
Julian
Arnold, MD
Husky Front Mud Flap Installation - 2012 Dodge Ram
Today on our 2012 Dodge Ram Pickup, well be installing the Husky Custom-Molded Mud Flaps for the front wheels, part number HL56171. First well go ahead and remove the older manufacturer mud flap. There are a total of three fasteners to be removed; two on the inner wheel well and one underneath the rocker panel. Well hang onto the two screws on the inner wheel well, as well use them to install the new Husky mud flap. Now with the old one off, well go ahead and clean up the area and prepare to install the new one. With the area cleaned and dry, well go ahead and set the new mud flap into position using the old fasteners to line up the mud flap.
Husky Rear Mud Flap Installation - 2012 Dodge Ram
Today on our 2013 Dodge Ram Pickup well be installing the Husky Custom Molded Mud Flaps for the rear wheels, part number HL57151. For this application, there is a large molding that runs along the rear wheel well and fender that will need to be removed first. Then were ready to install our Husky Custom Molded Mud Flaps. For this application, its quite dirty so well need to clean it first using a soap and water solution and a wet rag well go ahead and thoroughly clean it and wait for it to dry. Then well take our mud flap and fit it into place using a pencil to mark the top edge. Next, well need to apply the applicator solution so that we can adhere the clear paint protective adhesive.
WeatherTech Rear Mud Flap Installation - 2001 GMC Yukon XL
Today on our 2001 GMC Yukon well be installing the Weathertech mud flaps for the rear wheels, part number WT120006. First note weve already gone ahead and raised and removed the rear wheel on the drivers side. Now were ready to go ahead and install the mud flap. Well take the mud flap and sit it into position on the rear inner fender well. Then well take the machine screw and flat washer provided with our install kit and feed it over the top hole through the inner fender well. Then we can secure it with a flange nut provided.
Husky Rear Mud Flap Installation - 2013 GMC Yukon XL
Today in this 2013 GMC Yukon XL were going to install part number HL57781 from Husky Liners. These are custom molded mudguards. The first thing that you do to make things easier is you go ahead and remove the rear wheel. Then well go ahead and clean out the pain behind the rear wheel to make sure everything is nice and clean because we do have to install a protective decal well use some soapy water and then well go ahead some rubbing alcohol to help clean off any residue left over. Before we start any work well go and take a mudguard, hold it up to the fender and see how it first. Well make a small mark at the top so we know where to align our decal with.
Husky Front Mud Flap Installation - 2013 GMC Yukon XL
Today on 2013 GMC Yukon, were going to install part number HL56731 from Husky Liner. This is a custom molded mud flaps. To make things easier to install were actually going to remove the front wheel. Before we start any work well go and take a mudguard, hold it up to the fender and see how it fits, well make a small mark at the top so we know where to align our decal with. Once weve done that well go ahead and clean off the body work around the fender wheel. We need to clean this up because therell be a protective decal that we have to attach.
DeeZee Rear Mud Flap Installation - 2003 Dodge Ram
Today on a 2003 Dodge Ram 2500, were going to install part number DZ37910. These are the mud flaps for rear wheels. The first thing were going to do is go ahead and clean the fender wheel. Go back over again with some rubbing alcohol to make sure we have a good clean surface and well apply protective decal. Well go ahead and place the mud flap up to the fender wheel. Well make sure we have our decal on the right spot and allow it to dry.
DeeZee Front Mud Flap Installation - 2003 Dodge Ram
Today on a 2003 Dodge Ram 2500, were going to install part number DZ37909 from DeeZee. This is our mud flap for front wheels. First, what were going to do is go ahead and clean the fender wheel, go back over again with some rubbing alcohol to make sure you have a good clean surface, and well apply a protective decal. Well go ahead and place the mud flap up to the fender wheel. Well make sure we have our decal on the right spot and allow it to dry. After its dry, well go ahead and install the mud flap.
