Derale Radiator Adapter Fittings for Ford and Lincoln

See what our Experts say about this Derale Accessories and Parts

• Automatic Transmission Cooler and Fittings for a 2006 Ford F-150
  For transmission cooler fittings the 6 or 10AN you see listed on coolers such as # D52506 does not make a whole lot of difference because you would want to look at complete cooler kits rather than just a replacement core. The fittings included with the cooler are already a match for it and for the hose that comes with the kits. I recommend cooler kit # D13504. It comes with a large plate-fin cooler, the means to mount it, some hose, and hose clamps. In order to install the cooler without...
  view full answer...
• Transmission Cooler Recommendation for 2006 Ford F-150 5.4 V8
  The transmission cooler I recommend for your 2006 Ford F-150 with a 5.4 liter V8 is the Derale part # D13504 because due to the larger size of this cooler and it being a plate fin cooler it is very efficient. If your transmission lines have fittings that are 1/2"-20 thread you'd need the adapter part # D13024 or if they are 5/8"-18 you'd need the fitting adapter part # D13025.
  view full answer...
• What Transmission Cooler Should I use on my 2017 Ford Expedition
  You can choose many of the different coolers for your 2017 Ford Expedition. The 8an and 6an fittings are for other models instead I recommend using the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV part # D13504 and the Derale Radiator Adapter Fittings for Ford and Lincoln part # D13024. This will give you the components you need for a direct in line connection.
  view full answer...
• Parts Needed to Install Derale Transmission Cooler D15200 on 1999 Ford Van
  To install the Derale transmission and oil cooler part # D15200 on your 1999 Ford Van you will need the fitting adapters you mentioned of # D13014 and # D13024 as well as the transmission cooler install kit part # D13006 and the engine oil cooler install kit part # D15752 to have all the components needed.
  view full answer...
• Weight Distribution with Sway Control and Transmission Cooler Recommendation for 1998 Ford F150 4.6L
  The Strait-Line Weight Distribution with Sway Control, part # RP66072, you referenced would work very well as a weight distribution and sway control system for pulling your 1987 21 foot Sunline Camper with your 1998 Ford F150. I have included a link below to installation instructions and an FAQ page that you might find helpful. I would strongly recommend you upgrade your transmission cooler also. I would recommend the Derale Transmission Coolers for the 1998 F-150 and F-250 Light Duty...
  view full answer...
• What Transmission Cooler and Installation Kit for 1997 Ford F-350 7.3L V8 Power Stroke Diesel
  We have several options in transmission coolers for your 1997 F-350 7.3L V8 Power Stroke diesel and all can be seen on the link provided. Coolers are not vehicle-specific so you can use as large a cooler as you have space to mount it. The linked articles will give you plenty of useful guidance about placement that will guide your choice. If your truck uses 1/4-inch or 3/8-inch NPT trans-line type fittings you will need to use install kit # D13014; if it uses 1/2-inch-20 partial thread...
  view full answer...
• Stacked Plate Transmission Cooler Recommendation for F150 Ford 2010
  The best transmission cooler will be the largest cooler you can fit in front of your radiator. Transmission coolers work best when mounted at the very front of compartment, (in front of the radiator)BEHIND THE GRILLE. You will want to measure this space to know how much room to have to install a cooler. The Derale 19-Row Stacked Plate Transmission Cooler Kit # D13403 you referenced measures 13 inches wide x 7-5/16 inches tall x 2 inches deep. As long as this cooler fits behind the grille...
  view full answer...
• Transmission Cooler Recommendation For A 1989 Ford F-250 With 460 c.i. Engine And C6 Transmission
  Thanks for checking back with us for your towing needs. For your 1989 Ford F-250 with the 7.5L (460 c.i.) engine and towing a 7500 lbs trailer I would recommend using a Class IV transmission cooler. The Class IV rating will handle towing up to 12000 lbs. The Derale Series 8000 Transmission Cooler Kit, # D13504, that you have referenced is a plate-fin cooler and is one of the best Class IV coolers we carry. The Derale transmission cooler will fit inline with your factory transmission cooler. The...
  view full answer...
• Adapter Fittings For A Transmission Cooler In A 1999 Ford F-250
  We currently offer two different female adapters for Ford: Derale Radiator Adapter Fittings for Ford and Lincoln # D13024. This comes with a 1/2" female inverted flare fitting. Derale Radiator Adapter Fittings for Ford and Mercury # D13014. This comes with a 1/4" female NPT fitting. If neither of these are a fit then you'd want to check out your local auto parts or hardware store, which would likely have a better selection.
  view full answer...
• Transmission Cooler Recommendation for 2003 Ford F-150 with 5.4 liter V8
  Yes we have transmission coolers that will work great installed on your 2003 Ford F-150 with a 5.4 liter V8 engine like the larger and very efficient Derale # D13504 that requires the adapters # D13024 and # D13025.
  view full answer...
• Transmission Cooler Recommendation for 2004 Ford F-150 with 5.4 liter V8
  For your 2004 Ford F-150 with a 5.4 liter engine the Derale transmission cooler part # D13503 would be a great option. You'd also need the fittings part # D13024 and # D13025 and you'd be set in that regard as well.
  view full answer...
• What Transmission Cooler Fitting Will Fit On 2002 Ford F150 With 4.2 Liter V6
  The transmission cooler fittings you have referenced, # D13018, are not the correct part for your 2002 Ford F150 with 4.2L V6. For the 2002 Ford F150 with 4.2 L V6, it depends on what size transmission line fittings you have. If you have 5/8 inches-18 transmission line fittings you would use the Transmission Cooler Fitting, # D13025. If you have the 1/2 inches-20 transmission line fittings you would use Transmission Cooler Fitting, # D13024.
  view full answer...
• Does Supplemental Transmission Cooler Replace Factory Cooler of 1996 Ford F-150
  Ideally you actually install supplemental transmission coolers like the Derale part # D13504 after the factory cooler so that you get the cooling power of both coolers. This means you would not have to plug the ports on your radiator. You will also want the install fittings part # D13014 and # D13024 to make connecting your radiator as easy as possible and you'd be set.
  view full answer...
• Transmission Cooler Installation Tips for a 1994 Mercury Grand Marquis LS
  The Derale Series 8000 Plate-Fin Transmission Cooler Kit, # D13503, would be a great choice for your 1994 Mercury Grand Marquis, as long as there is room in front of the radiator and ac condenser for the cooler to mount. Measure to be sure before purchasing, but most likely you will have plenty of room. The best tip I can give is to do some research on your vehicle. Check the radiator fittings and see if there are NPT (national pipe thread) fittings or Inverted flare fittings. Your vehicle...
  view full answer...
  
• Does Transmission Cooler Install for 2004 Ford F-150 Require Hose Fittings
  You will want to use the hose fittings part # D13024 and # D13025 when installing the transmission cooler part # D12903 on your 2004 Ford F-150. They will make the process much easier and allow you to not have to cut and flare any hard lines.
  view full answer...
• Transmission Cooler Recommendations for 2010 Ford F150 4.6L
  I'd agree with the fact that you want the best cooling performance. Traveling through the mountains, especially when towing can be hard on your transmission. This is why we routinely recommend getting the largest cooler that will fit in the space available. The most efficient place to install a transmission cooler is between the grille and the radiator or A/C condenser. The Derale # D13504 measures 11 inches wide by 12 inches tall by 7/8 inches thick, so if you have that amount of space...
  view full answer...
• Will Supplemental Transmission Cooler Help 2001 Ford E350 Van
  So let's start with benefit, and the answer is absolutely yes, your 2001 Ford E350 van will benefit from a supplemental transmission cooler. Reason is, you cannot overcool fluids, and because towing is a stressor, additional cooling keeps temperatures down and helps prolong the lifespan of your transmission whereas just the factory cooler won't have that effect. And while a stacked plate cooler is good, you will get just as much cooling prowess from a plate-and-fin cooler which agitates...
  view full answer...
• Recommended Parts for 2004 Ford E250 5.4 V8 Towing Trailer
  You have the basics covered with the brake controller and tow mirrors but I would also recommend a transmission cooler like part # D13503 with the adapter part # D13024 and # D13014. This is going to do a great job prolonging the life of your transmission as heat is the number one killer of them and towing creates quite a bit of heat. Then to install the Redarc Tow Pro Elite part # RED44FR you'd just need the install harness part # RED87FR and for tow mirrors the custom install set # CTM2500...
  view full answer...
  
• Radiator Adapter Fittings for Installing a Transmission Cooler on a 1996 Ford F-250/350
  For your 1996 Ford truck there are threaded fittings in the radiator which are input and out put from/to the transmission cooler. The fittings allow you to replace the existing fittings with ones that have flared ends for the hose in a supplemental cooler so you do not have to cut and flare lines. Use kit # D13014 if the radiator uses 1/4 inch or 3/8 inch threaded fittings, or use kit # D13024 for 1/2-20 inverted flare fittings. You do not need both kits unless you are not sure of what...
  view full answer...
• Hose Size and Fittings to Install a Transmission Cooler on a 2010 Ford F-150 4.6 Liter
  The type of fitting to use will depend on the thread type used on the transmission line fittings on your 2010 Ford F-150. If they are 1/2"-20 threads use kit # D13024. If they are 5/8"-18 use # D13025. If you can measure the diameter of the threaded part of a fitting on your truck that will tell us which one is correct. If you are getting a kit such as # D13504 then the proper size hose is included. The standard hose is 11/32 inches inner diameter.
  view full answer...
• Transmission Cooler For 2007 Ford F150
  You can indeed install a cooler like the # D52506 in place of the existing factory cooler, but you might consider installing it inline between the radiator and transmission as outlined in the help article I've provided. This will provide additional cooling which will work great because unless you live in a very cold climate, you really can't over cool a transmission. You'll need one of two fittings. Use kit # D13024 for vehicles with 1/2"-20 thread on trans line fitting, or use kit # D13025...
  view full answer...
• Recommended Transmission Cooler 2010 Ford F-150 STX
  If you are looking for the best transmission cooler available for your 2010 Ford F-150, I suggest the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV # D13504. This 11" wide x 12" tall x 7/8" deep, efficient heat exchanger will prolong the life of your transmission and improve its overall performance, though it is specifically designed for vehicles with late-model, electronic overdrive transmissions. The correct fitting will depend on which size fittings your...
  view full answer...
• Transmission Cooler Recommendation for 1988 Ford F-350 with 460 Cubic Inch Engine
  I'd recommend a larger transmission cooler for your 1988 Ford F-350 with a 460 cubic inch engine like the Derale part # D13504 which measures 11" Wide x 12" tall x 7/8" deep. This is a larger plate-fin style cooler which is going to be very efficient and provide the best cooling. To make the install easier you'll need the fittings # D13014 and # D13024 which make attaching the hoses to the radiator fittings much easier since they thread right on.
  view full answer...
• Recommended Transmission Cooler For a 1999 Ford F-150 With 4.6L V8
  I recommend using the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13504 as it is one of our larger transmission coolers and will help to keep your transmission temps cooler. You will need the Adapter Fittings # D13024 and # D13025 to tie into your transmission fluid cooling lines. Unfortunately, we do not have any installation videos on a vehicle similar to your 1999 Ford F-150 at this time.
  view full answer...

Do you have a question about this Accessories and Part?