bing tracking image
  1. Accessories and Parts
  2. Derale
  3. Transmission Coolers
  4. Fittings
  5. -6 AN x 3/8 Hose Barb
Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting

Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting

lowest price pledge
Our Price: $4.46
You Save: 79%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.05 lbs
In Stock
D98200 - Fittings Derale Transmission Coolers
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Threads onto -6 AN, male swivel fitting to attach line. 1-800-940-8924 to order Derale accessories and parts part number D98200 or order online at Free expert support on all Derale products. Guaranteed Lowest Price and Fastest Shipping for Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Photos
  • Why etrailer?

Derale Accessories and Parts

  • Transmission Coolers
  • Fittings
  • Derale
  • -6 AN x 3/8 Hose Barb

Threads onto -6 AN, male swivel fitting to attach line.


  • Threads onto heat exchanger to allow for hose attachment
  • Fits -6 AN, male cooler-core inlets
  • Aluminum fitting


  • -6 AN female x 3/8" hose barb
  • 1-Year warranty

98200 Derale AN Swivel Hose Barb Fitting

Item # D98200

Customer Reviews

Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting - D98200

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

Threads onto -6 AN, male swivel fitting to attach line.


I looked EVERYWHERE for a part to fit my 1990 4Runner radiator “out” port for transmission fluid cooling. I had stripped a portion of the threads on the radiator transmission out-port and the OEM attachment wasn't deep enough to reach the still-good threads. Then I found this part after a tireless search and numerous purchases that didn't fit. This fit PERFECTLY and was deep enough to reach the entire "out" portion of the threading for the port. It is now on there SOLID and I no longer have to worry about my temp-solution (I hoseclamped the line to the male out port) slipping off every time I drive my truck. Nothing like piece of mind, and these guys had the part!


Products from etrailer have never disappointed me. I have been using etrailer for years and will continue. Plane on using these items on our trip to Utah to see my grandchildren. I haven't had a chance to use them yet but not worried because etrailer always delivers.


Good quality ,fit well .Thanks so much .The young lady was very helpful and nice to me .


Ask the Experts about this Derale Accessories and Parts

  • Are Derale -6 AN Female Swivel x 3/8" Barb Hose Fittings Brass?
    The Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting # D98200 you were referring to are not brass, it is an aluminum fitting. The Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings # D52506 will work for you so long as you have the required space for it to fit; his cooler measures 13" Wide x 9-3/16" tall x 2" deep.
    view full answer...
  • 3/8" Hose Adapter Needed for Derale 25-Row Stacked-Plate Cooler with -6 AN Fittings
    Yes, the adapter you need for the Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings # D52506 is part # D98200 which is the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting. This will allow you to use your 3/8" hose that you mentioned.
    view full answer...
  • Recommended Transmission Cooler for a 2013 Chevrolet Tahoe with the 5.3L V8 Engine
    The best transmission cooler to use on your 2013 Chevrolet Tahoe will be the largest one you have space available for in front of your radiator/condenser behind your grill. Unfortunately, we have not test fit any transmissions coolers on your Tahoe yet but we have test fit the Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13504 on a similar 2009 GMC Yukon and found this to be a good fit therefore will more than likely work for you as well. This cooler will do a great job...
    view full answer...
  • Fittings To Attach a Transmission Line to the Derale 25-Row Stacked-Plate Cooler D52506
    The Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52506 comes with -10 AN female fittings. It also comes with a reducer that adapts this -10 AN female fitting to a male -6 AN fitting (see photo) so that you can then use the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting part # D98200. If the Derale 25-Row, High-Performance, Stacked-Plate Cooler did not come with this reducer then please just let me know but it should have. In regards to the other fitting you are looking...
    view full answer...
    Image 1 for
  • Standalone Transmission Cooler for a 2015 Toyota Tacoma with 4.0L V6 Engine
    It is not recommend to bypass the factory transmission cooler in the radiator when installing an auxiliary transmission cooler but I certainly understand your concern of fluid contamination as this would be very costly to repair. Since you are getting rid of the factory transmission cooler in the radiator you are going to want to use a fairly large stacked cooler as stacked coolers are the most efficient type. I recommend using the Derale 40-Row High-Performance Stacked-Plate Cooler part...
    view full answer...
  • High-Rated Transmission Cooler Recommendation for a 2007 Chrysler Aspen
    You might need a more efficient transmission cooler for optimum cooling on your 2007 Chrysler Aspen. Stacked plate coolers are the most efficient, such as # D52506. If the cooler you have now is an aftermarket external cooler then you likely won't need additional parts to run the lines to and from it but you will need hose barb fittings that can mate up with the cooler, # D98200. Or you could get a kit, # D13403, which has a smaller core but it is still Class V rated.
    view full answer...
  • Derale Class V Transmission Cooler for 2011 Silverado 5.3L
    The Derale high-efficiency Class V stacked plate transmission cooler # D52506 can replace your current cooler as long as you have the space for mounting it (it measures 13W x 9-3/16 x 2). This cooler will work well as a replacement for the KNP and will provide better cooling. You can install it with the 6AN fittings facing in any direction. The kit includes just the core and the aluminum 6AN fittings. If you need to connect to hose barb oil lines you can use 6 AN Female Swivel Fitting...
    view full answer...
  • Can Stacked Plate Transmission Cooler Install in 2009 Chevy Avalanche
    Yes, the Derale transmission cooler part # D52506 does fit your 2009 Chevy Avalanche but to install it you are going to want the snap in adapter part # D13035 and the rubber line part # D13016 with the Derale -6 AN Female Barb Fitting # D98200 to complete the install.
    view full answer...
  • Transmission Cooler For 2007 Ford F150
    You can indeed install a cooler like the # D52506 in place of the existing factory cooler, but you might consider installing it inline between the radiator and transmission as outlined in the help article I've provided. This will provide additional cooling which will work great because unless you live in a very cold climate, you really can't over cool a transmission. You'll need one of two fittings. Use kit # D13024 for vehicles with 1/2"-20 thread on trans line fitting, or use kit # D13025...
    view full answer...
  • Transmission Cooler Recommendation for a 2015 Toyota 4Runner
    Transmission coolers don't have specific fits, but if you have room for the # D52506 in front of your radiator/AC condenser then it would work well. It measures 13" Wide x 9-3/16" tall x 2" deep. This is one of the most efficient coolers on the market that would work great on your vehicle. To install this cooler you will need a few other components. Part # D50020 for a bracket kit, part # D98200 for a fittings (you'll need two of these), hose clamps part # D13008, and rubber hose part # D13017.
    view full answer...
  • Parts Needed to Install Transmission Cooler # D13311 in a 2011 Jeep Liberty
    You would need the AN fitting adapters part # D98200 for each end of the cooler and then the clamps part # D13008 for securing the hose to the line, and for hose part # D13016. Most likely you will also need the insta-dapt fitting part # D13004 as well.
    view full answer...
  • Best Transmission Cooler Recommendation for 2013 Chevy Silverado with 6.2 liter V8
    Stacked plate transmission coolers are by far the most efficient ones available. The largest one we have is the part # D54006 which measures 13" Wide x 13-11/16" tall x 2" deep. For a bracket kit you would need the part # D50020, for AN fitting adapters you'd need two of the # D98200. For the fitting for your truck you would want the part # D13035. For a 5 foot section of hose we have the part # D13016.
    view full answer...
  • Parts Needed To Install a Derale High-Performance, Stacked-Plate Cooler on a 2015 Chevrolet Tahoe
    I do have an option for you but the part that you referenced, the Bracket Kit for Derale High Performance Stacked-Plate Coolers part # D50020 is just a bracket kit for a stacked-plate cooler like the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52506. In order to use the above stacked-plate cooler you will need a few items which I have attached for you below but they will vary based on what size transmission lines your 2015 Chevrolet Tahoe uses. The most common is 3/8"...
    view full answer...
  • Will the Derale 25-Row Stacked-Plate Cooler Fit a 2005 Chevy Silverado 2500
    The stacked-plate transmission coolers like the Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings part # D52506 do offer superior cooling power when compared to plate-fin and tube-fin designs. However, they are also much thicker at 2" which means you will need to make sure you have this much depth in addition to the length and height of 13" wide x 9-3/16" tall. There should be plenty of space behind your grille for this cooler so I don't think you will have any issues....
    view full answer...
  • When Installing a Transmission Cooler Can the Inlet/Outlet Ports Face Down
    Yes, you can install a transmission cooler like the Derale 25-Row Stacked-Plate Cooler part # D52506 so that the inlet and outlet ports are facing down. The inlet and outlet ports do not need to be pointed in any one specific direction as the line pressure will work to pump the fluid though the inlet of the cooler and out the outlet to be returned back to the transmission. In order to install the above you will need the following: Derale -6 AN Female Swivel part # D98200 Derale High-Temperature...
    view full answer...
  • Derale 40-Row Transmission Cooler For a 1997 Ford F-250 Heavy Duty Pickup
    To use the Derale 40-Row, High-Performance, Stacked-Plate Cooler # D54006 on your 1997 Ford F-250 you will a few parts to attach to your 5/16" transmission line. First you need two if the Derale -6 AN Female Swivel x 3/8" Barb Hose Fittings # D98200 to convert the AN fittings on the cooler. Then you will need some 3/8" Derale High-Temperature Replacement Hose # D13016 which comes in a 5' length. Depending on the placement of your cooler you may need 2 of these. The Derale Stainless Steel...
    view full answer...
  • Recommended Frame Rail Fluid Cooler for 200r4 Transmission on 1946 Chevy Truck
    The Derale 24" Frame Rail Fluid Cooler with -6 AN Inlets # D13225 is a great option. It does not require lines to the front of your truck to cool your transmission. There is not a longer option available, but you can run the Derale 17" Frame Rail Fluid Cooler with - 6 AN Inlets # D13221 as well if increased cooling is desired and you need to be under 45 inches. You may also be interested in the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting # D98200, Derale High-Temperature Replacement...
    view full answer...
  • Can I Bypass the Factory Transmisson Cooler on a 2007 Nissan Frontier
    We do not recommend bypassing the factory cooler with a supplemental transmission cooler, but if you are going to do so, I strongly suggest using the largest and most effective cooler that will fit in your engine compartment. Keep in mind, these transmission coolers are designed to be supplemental coolers to the vehicle's cooling system, not independent coolers. As far as coolers go, the most effective design is a stacked-plate cooler like the Derale High-Performance Transmission Cooler,...
    view full answer...

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee DeAnne T
Updated by:
DeAnne T
Employee Adele M
Updated by:
Adele M
Employee Daron K
Updated by:
Daron K

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.