2015 Chevrolet Colorado Truck Tailgate Lock

Hey Robert, to install the Pop & Lock Valet Conversion Kit for Tailgate Locks #PL5500CONV that you referenced is going to take a little less than an hour. Some get it done in around 30 minutes though.

If the locking mechanism of the Pop and Lock Powered Tailgate Lock, #PAL8320, fails, the only way to unlock the tailgate is to break into the tailgate to remove the lock. I spoke with my contact at Pop and Lock and he said most lock smiths can do…

Yes, the Replacement Lock Core for Pop & Lock Tailgate Lock #PL5400CONV for the Pop & Lock Custom Locking Tailgate Handle - Manual #PAL5500 will work great with your 2012 Toyota Tacoma TRD Sport with a backup camera. If you check out the…

Pop & Lock Custom Tailgate Lock for Steel Tailgate Handle - Manual - Black #PAL2300 does install under your Ford Ranger's steel OEM handle. Installation will require disassembling your tailgate, but it is a very easy install. I've…

Yes, the Pop and Lock Tailgate Lock part #PAL5411 that you referenced does still allow the backup camera that mounts in the OEM handle to still function as it has a cut out for that to fit into.

For your 2009 Dodge Ram 1500 we have two option styles for a tailgate lock. We have the electric power lock style part #PAL8350 that will lock the handle of the manual style part #PAL9900 that locks the tailgate to the truck. If the goal is to lock…

Hello Dean, thanks for reaching out. I do have a good option for you, although we do not have an exact match for the Atwood model R1737BB. Take a look at the GE Profile Propane RV Range #GE24VR. This is a 3 burner gas range with a stainless finish.…

Hello Kevin, thanks for reaching out. The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR is not made here in the USA it is made overseas. The jack lifts from 8-1/2" to 37-3/4 to you will want to compare this to the frame of your truck to…

I have linked the installation instructions for the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness #PL34FR below. You will want to see page 7 to locate where the plug and play harness ties into the factory wiring behind the…

It is possible to combine a tailgate lock and a lock for a Leer camper shell. The best way to do this is to use the Pop & Lock Custom Tailgate Lock #PL34FR, which will work with the factory keyless entry system on your 2017 Toyota Tacoma. You can…

Yep you have the right harness, just the Pop and Lock harness #PL34FR has been updated allowing it to work with multiple years of the Toyota Tacoma which has added a few more connectors. You'll use the purple and grey wires if installing on the…

I spoke with Pop & Lock and their tech said that this definitely sounds like you're spliced into the wrong wires and that the Pop & Lock Custom Tailgate Lock #PAL8600 is receiving constant power once the vehicle is on, which is why the…