Pop and Lock Tailgate Lock for 2013 Toyota Tacoma with Camera that Keys to Truck Key

Question

Question:

I have a 2013 Toyota Tacoma regular cab truck. Which pop and lock tailgate handle can I buy that has the backup camera and has the lock that can be coded with the ignition key?

asked by: J S

1

Helpful Expert Reply:

The correct Pop and Lock tailgate lock for your 2013 Toyota Tacoma with a backup camera is the part # PAL5400 which comes with a lock cylinder that will allow you to key to your truck's key.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

1

Answer 1

Hey, Andrew! If you have the inside bed rails, you won't have to do any sort of modifications to be able to install the Extang Trifecta Signature 2.0 tonneau cover part #EX94915. The Instructions will go over how to install the cover if you do or…

view full answer...

Answer 2

Just the handle portion by itself is not a replaceable part, so you would need to replace the entire assembly on your 2015 Toyota Tacoma, the Pop & Lock Custom Locking Tailgate Handle #PAL5500.

view full answer...

Answer 3

I called my contact at Covercraft and asked about the bucket seats you have in your 2011 Tacoma TRD. They told me that if the passenger front seat will fold forward completely flat, those are not sport bucket seats. The sport bucket seats will not…

view full answer...

Answer 4

I have the covers you need! However, for your sport bucket seats on your 2010 Toyota Tacoma, I confirmed that the Covercraft SeatSaver Custom Seat Covers - Front - Gray #SS2403PCGY is for standard bucket seats and will not fit sport models. This kit…

view full answer...

Answer 5

If the tarp of your Extang cover is canvas then you have the Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas #EX94915 and would need the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover - Black #EX72VR. This will…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Hi Steve; the factory hitch on the 2013 Tacoma has the bumper brackets integrated into the hitch. You can replace it with the etrailer Trailer Hitch #e98850 but you will have to remove the old hitch and find new bumper brackets to complete the…

view full answer...

Answer 10

Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…

view full answer...

Answer 11

Both the Curt Class III Trailer Hitch #13323 and the Draw-Tite Class III Trailer Hitch #75236 would work well for you. These Class III trailer hitches have a 2 inch receiver, 5,000 pound max towing weight and 500 pound max tongue weight. For…

view full answer...

Answer 12

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Pop and Lock Tailgate Lock for 2013 Toyota Tacoma with Camera that Keys to Truck Key

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching