How to Wire Up Brake Controller in 2015 Chevy Colorado

Updated 07/11/2018 | Published 07/10/2018

Question:

Gentlemen I am trying to wire this controller . I have found your wiring diagram for the Voyager. Can you tell me how to connect a 2015 Colorado? The pickup has: 1 thick wire . red/green insulation-pretty sure this is power 1 thick wire . aqua insulation 1 thin wire . black insulation 1 thin wire white w blue stripe insulation. - I have watched your video on hooking a tekonsha prodigy p3 brake controller to a 2015 colorado. but the tech goes too fast for me when describing the insulation color matchups. thanks

asked by: Steve S

Expert Reply:

When installing a brake controller in your 2015 Chevy Colorado the wiring needed is behind the kick panel like you mentioned. White wire with blue stripe is for the red wire on the controller. The red wire on the truck is for the black wire for the brake controller. The black of the truck goes to the white of the controller, and the light blue one is for the blue wire of the controller.

expert reply by: Jameson C