7-1/2" x 3-3/8" 4-Function, waterproof light acts as brake, tail, turn, and backup light. TecNiq red and clear lens creates a solid panel of light. Mounts to trailer surface with built-in flange (hardware not included). 2-Wire pigtail.Features: Oval trailer tail light serves 4 functions Turn signal light Tail light Brake light Backup light Red and clear lens creates a solid light pattern with a smooth appearance Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and white LEDs Surface-mount installation - hardware not included 4-Wire pigtail White wire for ground Yellow wire for reverse Red wire for stop/turn Black wire for tail Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 tail light Dimensions: 7-1/2" long x 3-3/8" tall x 1-5/8" deep Mounting hole spacing: 7" horizontal x 2-3/4" vertical Diodes: 8 Power draw between 9 volts to 14 volts: Tail light: 0.11 amps to 0.13 amps Turn/backup light: 0.24 amps to 0.30 amps Lifetime warranty on LEDs
Bright and stylish, this X-shaped LED light will be easy for other drivers to spot as both a backup and tail light on your truck or trailer. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.Features: Oval reverse/tail light for trailers and trucks Certified for use as a backup light if installed as a pair X-shape design makes for a sleek, eye-catching look Red X glows for tail light Surrounding white LEDs light up for reverse Waterproof - great for boat trailers Red and white LEDs with clear lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting requires grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Overall dimensions (including plug): 6-1/2" long x 2-3/8" tall x 1-3/4" thick Compatible with 12V DC systems Diodes: 12 Power draw 12.8 volts: 0.381 amps Lifetime limited warranty on LEDs What Wiring Do I Need?
This reversible 2-LED fender light keeps replacement simple since the same symmetrical assembly works on either side of your trailer. The sonically sealed housing is submersible, while the amber/red lens puts both colors in one compact light.Highlights Mount on Either Side: Symmetrical assembly installs on the driver or passenger side of your trailer. Ready for Boat Trailer Use: Sonically sealed lens and housing keep the light submersible. Amber and Red in One Light: Smoke amber/red lens combines both lens colors in one assembly.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... The unit is sonically sealed, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
One light does it all. This 4" round grommet lamp drops into standard holes to handle stop, turn, tail, and reverse. Sealed, UV tough, and low draw, it keeps your trailer visible and compliant from campsite to jobsite.Features: Combination Stop/Turn/Tail and Reverse LED in a 4" round package Grommet mount fits standard 4" round applications Grommet (TN43TR) is sold separately Low current draw: high-intensity stop/turn uses ~0.13 A at 12 VDC; reverse adds 0.3 A TecSeal urethane potting protects the circuit board UV-resistant, automotive-grade polycarbonate lens IP68 rated - dustproof and waterproof with hermetic seal Meets FMVSS 108 requirements for wide and narrow vehicles Reliable performance rated over 100,000 hours Wire colors: White - Ground, Red - Stop/Turn, Black - Reverse Specs: Dimensions (grommet mount): 4-5/16" diameter x 1-5/8" depth LEDs: 8 red / 2 white Voltage: 9-14 VDC Current - Stop/Turn (red): 0.11 A to 0.15 A Current - Reverse (white): 0.3 A Connector: Tri-Pole Mounting: Grommet; fits standard mounting holes Ingress rating: IP68 Compliance: FMVSS 108 Construction: TecSeal urethane potting; UV-resistant polycarbonate Service life: rated over 100,000 hours Lifetime warranty TecNiq has designed this high visibility stop, tail, turn, and reverselight to ensure you are seen in all conditions and at great distances.
Hey Dejay, while a Timbren kit and an air bag kit can fit together at same time if you find that you need both to prevent sagging it's very likely the case that you are exceeding the capacity of the vehicle and that's the real problem. What…
The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…
Thanks for the picture! It looks like space on your trailer's tongue is going to be a little tight for a weight distribution system. Plus it has an aluminum frame. The only way to address the sagging issue is going to be by upgrading your…
Yes, dielectric grease like the Dielectric Grease for Electrical Connectors #11755 can and should absolutely be used on electrical connectors like your 4-pin trailer connector. Dielectric grease does a great job of protecting your equipment from…
Hello Darin, thanks for reaching out. I do have a solution for you. What I recommend is the Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00. This is made for trailers with drum brakes, and it attaches to a 2" ball. It does not come with an…
Hey Scott! The Dexter DX6.6 Drop-N-Go Brake Actuator #DX79UR is not available with a solenoid since it was designed to be used with free-backing brakes. If you want an electric lockout you will have to add a solenoid #T4748800 to the brake actuator.…
If a trailer clearance light like part #MCL44AB1 is used, the one wire is the power wire for the light and the light will be grounded through the mounting hardware. If you want to use the ground wire that you have on your trailer you can install part…
Hey Patrick! Do you have drum brakes or disc brakes? Is the actuator 3-5/8" wide or is the channel tongue on your trailer that wide? I'm guessing you have a 3" wide channel tongue which is pretty standard. Do you need a coupler for a…
Hey Keith, thanks for reaching out! The wiring for the Optronics Smoke Lens ID Light Bar #OPT55KB is the following: RED - Stop WHITE - Ground BLACK - Tail YELLOW - Back-Up
There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…
I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…
There are brighter lights available for your current Bargman 92 Series lights, but none that have a reverse light function. So to replace your current lights with brighter LEDs you will need the LED Trailer Tail Light - Driver's Side…
From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Guaranteed circuit board protection Durable impact resistant lens Exceeds FMVSS 108 standards, IP68 rated for dust and water proofing Multiple mounting positions Wire functions: Yellow: reverse Red: stop/turn Black: running lights White: ground Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 3 Color: Clear lens Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screws not included - screw caps included) Connector: 9" wire Lifetime warranty TecNiq packs wide angle and bright illumination for maximum safety while retaining a sleek design.
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
Backing up in the dark shouldnt feel like guesswork. This reverselight throws white light through a tinted lens that looks sharp during the day and bright at night. It snaps into a standard 6" oval grommet, seals out water and road grime.Highlights Bright, Clean ReverseLight: 8 white LEDs shine through a tinted lens for a sharp daytime look and strong visibility when backing up. Standard 6" Oval Fit: Drops into industry-standard openings with a rubber grommet for a flush, shock-damping install.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-1/2" x 2-3/8" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverselight. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.The light accepts a 3-prong plug (sold separately). Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
4-1/4" Round. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Round backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible GloLight Series features a brighter outer ring of light with a smooth appearance LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Light fits into a 4-1/2" diameter hole Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Dimensions: 4-1/4" diameter x 2-3/16" deep Diodes: 21 Power draw at 12.8 volts: 0.425 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-7/16" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Oval backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Dimensions: 6-7/16" long x 2-1/4" wide x 1-3/4" deep Diodes: 10 Power draw at 12.8 volts: 0.26 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
Rectangle LED trailerlight with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.Features: Rectangular LED trailerlight works as a stop, turn, tail, and reverselight functions LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Red and clear lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 4-Wire design DOT compliant Specs: Dimensions: 9-5/8" long x 7" tall x 5/8" deep Diodes: 20 Wire length: 7" Weight: 0.95 lbs 1-Year limited warranty
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
7-1/2" x 3-1/4" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing. ... Features: Oval backup light for trailers and utility trucks Certified for backup light function when installed as a pair in a 2-lamp system (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Recessed mount with built-in flange Accepts industry-standard, 2-prong plug (A45CB or A49PB - sold separately) DOT compliant Meets FMVSS (2) R requirements Specs: Overall dimensions: 7-1/2" long x 3-1/4" tall x 1-1/8" deep Light face dimensions: 6-1/2" long x 2-1/4" tall x 1" deep Diodes: 6 Power draw at 12.8V: 0.260 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4-1/4" Diameter round. Weatherproof, LED trailerlight provides backup light function. LumenX optics creates a solid panel of light. Recessed mount with grommet (not included). Accepts standard 2-wire PL3 plug.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole.
4-5/16" Diameter round. Waterproof, LED trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. ... Features: Round backup light for trailers and utility trucks Certified for backup light function when installed as a pair in a 2-lamp system (second light sold separately) High diode count creates a strong light pattern Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Recessed mount with grommet (A45GB - sold separately) Accepts industry-standard, 2-prong plug (A49PB or A45CB - sold separately) DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Dimensions: 4-5/16" diameter x 2" deep Diodes: 36 Power draw at 12.8V: 0.145 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-5/16" x 3-7/16" Rectangle. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system. ONE Series provides bright light using fewer diodes than other LEDs. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A70GB) sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
5-13/16" x 6-3/4". LED Jeep-style combination trailerlight acts as brake, tail, turn, backup, and license plate light. Durable plastic housing and acrylic lens. Stud-mount with included hardware. 4-Wire harness. ... Features: Jeep-style trailer tail light serves 5 functions Stop light, tail light, turn signal light, backup light, and license plate light LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red and clear lens over white LEDs Mounts on surface of trailer with included studs 4-Wire molded harness White wire for ground Black wire for tail light and license plate light Red wire for stop/turn signal Yellow wire for reverse DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL60RB) sold separately Dimensions: 6-3/4" long x 5-13/16" wide x 2-11/16" deep Diodes: 57 Tail light: 16 diodes Backup light: 36 diodes License plate light: 5 diodes Power draw at 12.8 volts: Stop/turn signal light: 0.308 amps Tail light: 0.013 amps Backup light: 0.328 amps Lifetime LED warranty
The outer red LEDs glow for the tail light, brighten for the brake light, and flash for the turn signal. The white X in the center displays the reverse signal. LED: Bright, Long-Lasting, Efficient LEDs are a great upgrade above incandescent bulbs.
Filters
