Replacement Brake Actuator for 2008 Jayco Jay Series 1206

Updated 09/26/2025 | Published 04/29/2025

Products Featured in This Question

Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs

(91)

$356.59

Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs

(174)

$327.33

Question:

Hi i have a 2008 jayco jay series 1206 pop up camper it has surge brakes but the whole actuator is junk. I need to replace it but im not sure what i need i measured the bolts and its 3 center and im measuring about 3 5/8 on the gap in the tongue where it was. I would greatly appreciate any help if possible.

asked by: Patrick R

Expert Reply:

Hey Patrick! Do you have drum brakes or disc brakes? Is the actuator 3-5/8" wide or is the channel tongue on your trailer that wide? I'm guessing you have a 3" wide channel tongue which is pretty standard. Do you need a coupler for a 2" ball or 2-5/16" ball? For example, the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 you were looking at is designed to fit a 2" ball, 3" tongue, and works with disc brakes.

The bolt pattern probably doesn't match since it has that third bolt hole but I'm not entirely sure what yours looks like. If you like a particular actuator you can always drill new holes, but I understand not wanting to if it isn't necessary. Is it a line of 2 bolts running straight across 3" apart on center? That would match the Dexter # T43397007K which is designed for drum brakes and fits 1-7/8" and 2" balls.

expert reply by: Robin H

Robin H.

9/26/2025

Hey Patrick, did you find out if you have drum or disc brakes on your camper? I'm curious if the Dexter actuator options worked out for you, as it could help others in a similar situation.