Door Hinge for 2001 Exiss Horse Trailer

Updated 11/18/2025 | Published 11/09/2021

Question:

2001 exiss horse trailer. I need the door hinges. It was pushed over and the right side hinges are bent and do not allow the door to fully close. I also need a set of hinges for the down window please. Thank You

asked by: Laura S

Expert Reply:

The hinge you referenced part # PLR2212-AS would replace what you have now on your horse trailer and the holes would line up.

It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any in that length.

expert reply by: Jameson C

Hinge on Horse Trailer
(click to enlarge)

Jim C.

11/16/2024

My hinges on my Exiss have 4 holes going into the wall of the trailer. Hinge PLR2212-AS looks like it only has 2 holes, is that right?

Jameson C.

11/18/2024

@JimC You are correct that hinge only has two holes that attach to the door of the trailer.

Jim C.

11/19/2024

@JamesonC, I've had no luck locating a 4-hole hinge! They appear to be on most gooseneck trailers thru at least 2012. From the tip of the strap it is 14 in to the center of the hinge pin. 5/16 dia holes are 1 in, 4 1/2 in, and 7 3/4 in from the strap tip. The first two 3/8 dia hinge holes are 10 3/4 in from the tip and the second two are 11 3/8 in. The strap is 2-in wide and the hinge is 5-in wide. I've seen them on Exiss, Bison, and Keifer trailers the last few days. Got any idea where I could find one?

Jameson C.

11/19/2024

@JimC We do have the part # PLR4040 which has four holes. The distance between the top and bottom holes is 3 inches and between left and right is 1-1-/4.

See All (5) Replies to Jim C. ∨

Amy B.

11/18/2025

What is the size/type bolt for those hinges. I have the exact same trailer and one of my rear door hinges is missing a bolt.

Jameson C.

11/18/2025

@AmyB Typically the hinge pins on this type of hinge is 1/2 inch. Other common sizes are 5/16 inch and 9/32 inch. I would recommend measuring to see which diameter you have.